TP-LINK TL-WA5210G User Guide

2.4GHz High Power Wireless Outdoor CPE
TL-WA5210G
Outdoor Weatherproof Design Dual-Polarized 12dBi Antennas High Power and High Sensitivity
Description
The TL-WA5210G 2.4GHz High Power Wireless Outdoor CPE is dedicated to WISP CPE solution and long distance wireless
network solutions. It integrates the functions of a Wireless Access Point, WISP Client, high gain antenna and weatherproof
enclosure. It features 12dBi high gain antenna, high output power and high RX sensitivity can significantly extend the
transmission range to deliver a more stable wireless connection.
The TL-WA5210G provides three operation modes for multiple users to access the Internet: AP client router (WISP Mode),
AP router and AP (Access Point/Client/WDS Bridge/Repeater.).
meters PoE length.
www.tp-link.com
FeaturesSpecifications
Standards
Interface
Wireless Signal Rates With Automatic Fallback
Frequency Range
Wireless Transmit Power
Antenna
Beamwidth (HPBW)
Enclosure
ESD Protection Lightning Protection
Modulation Type
Receiver Sensitivity
Power Supply Unit
Certications
Operating Temperature
Relative Humidity
Dimensions
Diagram:
IEEE 802.11g IEEE 802.11b
One 10/100M Auto-Sensing RJ45 Port(Auto MDI/MDIX),
supporting Passive PoE
11g:108/54/48/36/24/18/12/9/6 Mbps (Dynamic)
11b:11/5.5/3/2/1 Mbps (Dynamic)
2.4-2.4835GHz
Up to 27±1dBm
12dBi Dual-Polarized Aluminum Antenna
Horizontal: 60°
Vertical: 30°
Outdoor weatherproof ABS
15kV ESD Protection
Grounding Terminal
IEEE 802.11b: DQPSK, DBPSK, DSSS, and CCK
IEEE 802.11g: BPSK, QPSK, 16QAM, 64QAM, OFDM
802.11g
54M: -76dBm 48M: -78dBm 36M: -82dBm 12M: -91dBm 9M:-92dBm
802.11b
11M:-90dBm 5.5M:-92dBm 1M:-98dBm
Input: localized to country of sale
Output: 12VDC / 1A Switching PSU
CE, FCC
-30°C~70°C (-22°F~158°F)
10% ~ 90%, non condensation
10.4 × 4.7 × 3.2 in. (265x120x83mm)
High output transmission power and reception sensitivity optimized
12dBi directional antennas t for various environments and boost your signal level
Weatherproof enclosure and lightning protection terminal integrated
Support 15kV ESD Protection
Supports WISP Mode
Supports Passive Power over Ethernet
Supports AP Client Router, AP Router and AP operation mode
Distance Adjustment for long range transmission, up to 50km
Supports Antenna Alignment
Supports Layer 2 User Isolation
Provides throughput monitor indicating the current wireless throughput
Supports Ping Watch Dog
Supports Wireless Speed Test
Supports Remote Management
Provides WEP, WPA/WPA2, WPA-PSK/WPA2-PSK data security
Provides external RP-SMA connector for higher gain antenna upgrade
Ethernet Cable
Electric Wire
Outdoor AP
Power Injector
Point-to-Point Connection
Internet
TL-R480T
WISP Client Router
Outdoor AP
Power Injector
TL-SF1008D
WISP Base Station
Package:
2.4GHz High Power Wireless Outdoor
­CPE TL-WA5210G Power Adapter
­RJ-45 Ethernet Cable
­Quick Installation Guide
­Power Injector
­Resource CD
­Mounting Kits
-
Related Products:
2.4GHz 15dBi Outdoor Omni-Directional
­Antenna TL-ANT2415D
2.4GHz 24dBi Grid Parabolic Antenna
­TL-ANT2424B 8-port Unmanaged 10/100M Desktop Switch
­TL-SF1008D
Specifications are subject to change without notice. TP-LINK is a registered trademark of TP-LINK Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specificationsmay be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK Technologies Co., Ltd.
Copyright © 2010 TP-LINK Technologies Co., Ltd. All rights reserved.
www.tp-link.com
Loading...