TP-LINK TL-WA5210G User Manual

Print Close

2.4GHz High Power Wireless Outdoor CPE

http://www.tp-link.com/products/print.asp?pmodel=TL-WA5210G

Spotlight:

Outdoor weatherproof and lightning/ESD protection design

12dBi dual-polarized antenna easy to build up to 15km wireless

link

High Power to boost your signal coverage and link speed

Passive Power over Ethernet for flexible deployment

WISP Mode Supported

Product Description:

The TL-WA5210G 2.4GHz High Power Wireless Outdoor CPE is dedicated to WISP CPE solution and long

distance wireless network solutions. It integrates the functions of a Wireless Access Point, WISP Client,

high gain antenna and weatherproof enclosure. It features 12dBi high gain antenna, high output power

and high RX sensitivity can significantly extend the transmission range to deliver a more stable wireless

connection.

The TL-WA5210G features high output power and high RX sensitivity can significantly extend the

transmission range to reduce dead spots and to deliver a more stable wireless connection. With

integrated 12dBi dual-polarized antenna, the TL-WA5210G would help you easy to build up to 15km long

range wireless link. If you have higher gain antenna, it also supports distance control from 0km to

52.6km, which breaks through distance limitations in normal 802.11g devices, enables ultra-long

distance wireless transmission.

The TL-WA5210G provides three operation modes for multiple users to access the Internet: AP client

router, AP router and AP. In AP client router mode, it works as a WISP CPE. In AP router mode, it can

access the Internet via an ADSL/Cable Modem. In AP mode it can work in various modes, such as Access

Point/Client/WDS Bridge/Repeater. With the most attentive wireless security, the TL-WA5210G provides

wireless LAN 64/128bit WEP encryption security, and WPA/WPA2 and WPA-PSK/WPA2-PSK

authentication, as well as TKIP/AES encryption security.

The TL-WA5210G is easy-to-manage. Quick Setup is supported and friendly help messages are provided

for every step. So you can configure it conveniently and share the Internet more quickly and easily.

Product Features:

High output transmission power and reception sensitivity optimized

12dBi directional antennas fit for various environments and boost your signal level

Weatherproof enclosure and lightning protection terminal integrated

Supports WISP Mode

1 / 3 2010.12.14. 13:13

Supports Passive Power over Ethernet

2.4GHz High Power Wireless Outdoor CPE

http://www.tp-link.com/products/print.asp?pmodel=TL-WA5210G

Support 15kV ESD Protection

Supports AP Client Router, AP Router and AP operation mode

Distance Adjustment for long range transmission, up to 50km

Supports Antenna Alignment

Supports Layer 2 User Isolation

Provides throughput monitor indicating the current wireless throughput.

Supports Ping Watch Dog

Supports Wireless Speed Test

Supports Remote Management.

Provides WEP, WPA/WPA2, WPA-PSK/WPA2-PSK data security

Provides external RP-SMA connector for higher gain antenna upgrade

Product Specifications:

Software Specification

Standards IEEE 802.11g, IEEE 802.11b

Wireless Signal

Rates With

Automatic Fallback

Frequency Range 2.4-2.4835GHz

Wireless Transmit

Power*

Modulation

Technology

Receiver Sensitivity

11g: 54/48/36/24/18/12/9/6M(dynamic) 11b: 11/5.5

/2/1M(dynamic)

<20dBm (EIRP, For countries using CE

Standards)

<27Bm (Peak Output Power, For countries using

FCC Standards)

IEEE 802.11b: DQPSK, DBPSK, DSSS, and CCK

IEEE 802.11g: BPSK, QPSK, 16QAM, 64QAM,

OFDM

802.11g 54M: -76dBm 48M: -78dBm 36M: -82dBm

12M: -91dBm 9M:-92dBm 802.11b 11M:-90dBm

5.5M:-92dBm 1M:-98dBm

Wireless Mode

Wireless Range

Wireless Security

Hardware Specification

2 / 3 2010.12.14. 13:13

AP Router Mode AP Client Router Mode (WISP

Clent) AP/Client/WDS Bridge/Repeater mode

15km with Integrated Antenna 50km Maximum (High

gain directional antenna required)

SSID Enable/Disable MAC Address Filter 64/128

/152-bit WEP Encryption WPA/WPA2/WPA-PSK

/WPA2-PSK (AES/TKIP) Encryption