TP-Link TL-SX105 Installation Guide

Panel Explanation

Power

On: Power on

O: Power o

Kensington Security Slot

Secure the lock (not provided) into
the security slot to prevent the
device from being stolen.

© 2021 TP-Link

7106509195 REV1.0.1

Installation Guide

5-Port 10G Multi-Gigabit Desktop Switch

Port

10G/5G 2.5G/1G/100M

Note:

The images in this guide are only for example and may not reect your actual experience.

Connection

TL-SX105

When one of the LED is on/ashing:

On: Connecting to a device but no activity.

Flashing: Transmitting or receiving data.

Left LED (10G/5G):
Green: Running at 10 Gbps.
Amber: Running at 5 Gbps.

Right LED (2.5G/1G/100M):

Green: Running at 2.5 Gbps.
Amber: Running at 100/1000 Mbps.

Power Adapter

Internet

Router

Ethernet Ports (1–5)

LAN PortWAN Port

10G

NAS/Server

Workstation 2.5G

Gaming

Computer

8K Video

Wi-Fi 6 AP

Specications

Frequently Asked Questions (FAQ)

General Specications

Standard

Protocol

Network Media (Cable)

Interface

MAC Address Table

Switching Capacity

Transfer Method

MAC Address Learning

Advanced Feature

Frame Forwarding Rate

Wall Mountable

Distance Bewteen
Mounting Holes

IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3an

IEEE802.3bz, IEEE802.3x, IEEE802.1p

CSMA/CD

100BASE-TX:

2-pair UTP/STP of Cat. 5 or above (maximum 100 m)

1000BASE-T:

4-pair UTP/STP of Cat. 5e or above (maximum 100 m)

2.5GBASE-T:

4-pair UTP/STP of Cat. 5e or above (maximum 100 m)

5GBASE-T:

4-pair UTP/STP of Cat. 5e or above (maximum 100 m)

10GBASE-T:

4-pair UTP of Cat 6 (maximum 55 m) or STP of Cat 6,
6a, 7 (maximum 100 m)

5 100M/1G/2.5G/5G/10G RJ45 Ports

Auto-Negotiation/Auto MDI/MDIX

32K

100 Gbps

Store-and-Forward

Automatically learning, automatically aging

QoS (802.1p/DSCP), 802.3x ow control

100Base-TX: 148810 pps/port

1000Base-TX: 1488095 pps/port

2.5GBase-TX: 3720238 pps/port

5GBase-TX: 7440476 pps/port

10GBase-TX:14880952 pps/port

Ye s

150 mm

Q1. Why is the Power LED not lit?

The Power LED should be lit when the power system is working
normally. If the Power LED is not lit, check as follows:

A1:

Make sure the power adapter is connected to the switch with
power source properly.

A2:

Make sure the voltage of the power supply meets the requirements
of the input voltage of the switch.

A3:

Make sure the power source is on.

Q2. Why are the right and left LEDs not lit when a device is
connected to the corresponding port?

It is recommended that you check the following items:

A1:

Make sure that the cable connectors are rmly plugged into the

switch and the device.

A2:

Make sure the connected device is turned on and works normally.

A3:

Make sure the cable category and length meet the standards listed

in General Specications.

Environmental and Physical Specications

Operating Temperature

Storage Temperature

Operating Humidity

Storage Humidity

Safety Information

Keep the device away from water, re, humidity or hot environments.

Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
Do not use damaged charger or USB cable to charge the device.
Do not use any other chargers than those recommended.
Adapter shall be installed near the equipment and shall be easily accessible.
The plug on the power supply cord is used as the disconnect device, the socket-outlet shall be easily

accessible.
Use only power supplies which are provided by manufacturer and in the origin packing of this
product. If you have any questions, please don’t hesitate to contact us.

0 ˚C to 40 ˚C (32 ˚F to 104 ˚F)

-40 ˚C to 70 ˚C (-40 ˚F to 158 ˚F)

10% to 90%RH non-condensing

5% to 90%RH non-condensing

To ask questions, find answers, and communicate with TP-Link users
or engineers, please visit https://community.tp-link.com to join
TP-Link Community.

For technical support and other information, please visit
https://www.tp-link.com/support, or simply scan the QR
code.

If you have any suggestions or needs on the product
guides, welcome to email [e-mail].

EU declaration of conformity

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant
provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.

The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce.