This guide is a complement to Quick Start Guide. The Quick Start Guide provides instructions for quick setup, while this guide
provides details of each function and shows how to configure the smart phone appropriate to your needs.
When using this guide, please notice that features of the device may vary slightly depending on the model and software
version you have, and on your location, language, and Internet service provider. All screenshots, images, parameters and
descriptions documented in this guide are used for demonstration only.
Conventions
In this guide, the following conventions are used:
Convention
Smart phone/phoneStands for Neffos X9 without any explanation.
Parameters
Underlined
Screenshots
->
Note:
Parameters provided in the screenshots are just references for configuring the smart phone, which may be
different from the actual situation. You can set the parameters according to your demand.
Italic and underlined words or phrases are hyperlinks. You can click to redirect to a specific section for more
details.
The demonstrated screenshots may look a little different from the actual UI of your smart phone due to the
various firmware versions. Please just configure your phone based on the actual UI.
The menu structure which shows the path to enter the corresponding page. For example,Settings-> WLAN
means the WLAN function page is under the Settings menu.
Ignoring the notes in the guide might result in a malfunction or damage to the device.
Description
1
Get started
This chapter introduces the smart phone’s hardware information and guides you how to
assemble your phone when you get started on using your new phone.
• Overview
• Buttons
• Put in the cards
• Initial setup
• Charge your phone
1. 1 Overview
1
SIM/SD card tray
1
LED indicator
2
Front camera
3
Earpiece
4
Ambient light &
5
proximity sensor
Volume buttons
6
Power button
7
324 5
9
8
1211
13
14
6
7
10
Primary microphone
8
Charging/data port
9
Speaker
10
Headphone jack
11
Two-tone flash
12
Secondary microphone
13
Dual-lens camera
14
Fingerprint sensor
15
15
1. 2 Buttons
The buttons you use with Neffos include virtual ones and physical ones.
Power button
• Lock Neffos: Locking your phone puts the display to sleep, saves the battery and prevents unintended
presses. You can still receive phone calls, text messages, alarms and notifications as well as listening to
music and adjusting the volume. Press the Power button to manually lock the screen. Neffos locks the
screen automatically in a given period of inactivity.
Get started
1Chapter 1 .
• Unlock Neffos: Press the Power button to wake the screen.
• Turn Neffos on: Press and hold the Power button until your phone vibrates and the screen turns on.
Note:
If your device displays the shut down notice after the screen turns on, the battery is empty. Connect your phone to a
charger to charge the battery, otherwise your phone will shut down in 30 seconds.
• Turn Neffos off: Press and hold the Power button, then tap .
• Reboot Neffos: Press and hold the Power button, then tap .
Volume button
• Press the Volume-up or Volume-down button to adjust the audio volume when you’re on the phone,
listening to songs, watching movies or using other media.
• Press the Volume button to take a picture or record a video. Refer to Take a photo and Record a video to
learn more.
• Press the Power button and Volume-down button at the same time to take a screenshot.
Navigation buttons
Back buttonRecent apps button
Home button
• Home button
Tap Home button to return to the default Home screen.
Touch and hold Home button to open GoogleTM search.
• Back button
Tap Back button to return to the previous screen or close an application. When entering text, tap Back
button to close the onscreen keyboard.
• Recent apps button
Tap Recent apps button to display recently used applications.
Double-tap Recent apps button to switch to the previous application.
Get started
2Chapter 1 .
1. 3 Put in the cards
Insert Nano SIM cards and microSD card (optional)
Nano-SIM
Nano-SIM
Or
microSD
Nano-SIM
1. Eject the SIM card tray by inserting the SIM ejector pin provided into the hole on the tray.
2. Place the the card(s) into the tray with the gold contacts face down. The card tray can support two NanoSIM cards or a Nano-SIM card and a mircoSD card.
3. Insert the card tray back into your phone in the correct orientation.
Note:
Take care not to scratch your device or harm yourself when using the SIM ejector pin. Store the SIM ejector pin out of the
reach of children to prevent accidental swallowing or injury.
1. 4 Initial setup
It is recommended to insert your SIM card before you start the initial setup.
Press and hold the Power button to turn on your phone, and then follow the onscreen instructions to complete
the initial setup.
Note:
To avoid low battery power, your phone will shut down automatically if not operated on Initial screen in 30 minutes.
1. Select your language and location, and then tap .
2. Proceed to Connect to mobile network screen.
If you insert two SIM cards, follow the onscreen instructions to finish dual-SIM settings. You can always
adjust dual-SIM settings in Settings -> Dual-SIM & network.
Your phone will automatically list available WLAN networks. Select the network you want to connect to (If
you want to view more Wi-Fi networks, tap See all Wi-Fi networks), and then enter the password to access
the Internet (This can take up to 2 minutes). If you have activated mobile data services with your carrier,
you can tap Use cellular network for setup. Or if you don’t want to connect to network, just tap SKIP ->
CONTINUE to skip this step.
Note:
Using cellular network for setup may result in additional fees. Contact your carrier for information about your cellular
data plan rates.
Get started
3Chapter 1 .
3. If you don’t connect to any networks, your device will proceed to Date & time screen. Set the data and
time, then tap NEXT. You also can tap NEXT directly to skip this step. You can always adjust date and time
in Settings -> More general settings -> Date & time.
4. Proceed to Name screen. Add your name to allow your phone to personalize some apps. Your name will be
saved as ME in Contacts. Then tap NEXT after finishing. If you don’t want to set now, tap NEXT directly.
You can always set your name in Contacts -> Set up my profile.
5. Pcoceed to Protect your phone screen. Select a device protection feature and then follow the onscreen
instructions to complete. If you don’t want to set now, choose Not thanks and tap NEXT -> SKIP ANYWAY.
You can always set your device protection in Settings -> Security -> Screen lock.
6. Pcoceed to Register fingerprint data screen. Select Register fingerprint and then follow the onscreen
instructions to complete. If you don’t want to register now, choose Not thanks and tap NEXT to skip.
7. Pcoceed to Register face data screen. Select Register fingerprint and then follow the onscreen
instructions to complete. If you don’t want to register now, choose Not thanks and tap NEXT to skip.
8. Proceed to Google services screen. Read the Google terms and conditions, then tap I AGREE.
9. Pcoceed to Anything else screen. You can set up a few more things there, or you can just skip by tapping
NO THANKS.
10. Proceed to Terms And Conditions screen. Carefully read the terms and conditions and then tap AGREE.
11. Setup completed. Tap START USING YOUR PHONE to start using your phone.
1. 5 Charge your phone
Your device displays a low battery warning when the battery is nearly empty. Charge your device immediately
to prevent it from switching off automatically.
Use the charger to charge your device
Connect the device to a power outlet using the included USB cable and power adapter.
Use a USB port to charge your device
If you do not have access to a charger, you can charge your device by connecting it to a computer with a USB
cable.
When you use a USB cable to connect your device to a computer or another device, Allow access to device data will be displayed in a popup dialog. Touch DENY.
If another USB connection mode has been selected, swipe down from the status bar to open the Notification
Panel. Tap the notification of USB connection mode, and then select Charge this device.
Note:
1. The battery is built into the phone and is not removable. Do not attempt to remove the battery yourself.
2. When charging your phone, only use genuine Neffos batteries, chargers, and USB cables. Third-party accessories are a
potential safety hazard and may impair your phone’s performance.
3. Avoid using your phone when it is charging. Do not cover your phone or the power adapter.
4. It is entirely normal that your phone may become warm after prolonged use or when exposed to high ambient
temperatures. If your phone becomes hot to the touch, stop charging it and disable unnecessary features. Place your
phone in a cool location and allow it to cool down to room temperature. Avoid prolonged contact with the surface of
your phone if it becomes hot.
5. A low battery warning will be displayed when the battery level is low. Your phone will turn off automatically when the
battery is nearly empty.
Get started
4Chapter 1 .
2
Learn about your smart phone’s basic feature.
• Touchscreen gestures
• Home screen
• Access applications
• Status bar
• Notification Panel
• Quick Settings Panel
• Type text
• Take a screenshot
• Configure your fingerprint
• Configure your face data
• Split-screen mode
Basics
2. 1 Touchscreen gestures
Use simple touchscreen gestures to perform a variety of tasks, such as opening applications, scrolling through
lists, and zooming images.
Tap: Simply tap an item once. For example, tap to select an option or open an application.
Double-tap: Tap the target area of the screen twice in quick succession. For example, double-tap an image in
full screen mode to zoom in or zoom out.
Basics
5Chapter 2 .
Touch and hold: Touch and leave your finger on the screen for 2 seconds or more to activate onscreen items.
For example, touch and hold a widget on the Home screen to move it.
Swipe: Place your finger on the screen, and drag your finger to the direction you want. For example, you can
swipe to scroll through the Home screen or a list.
Drag: Touch and hold an item and then move it to another position. For example, you can rearrange applications
and widgets on the Home screen.
Basics
6Chapter 2 .
Pinch fingers together: Pinch two fingers together on the screen. For example, pinch two fingers together
to zoom out on a picture.
Spread fingers apart: Spread two fingers apart on the screen. For example, pinch two fingers out to zoom in
on a picture.
Slide three fingers: Slide down three fingers on the screen to take a screenshot.
Basics
7Chapter 2 .
2. 2 Home screen
Your Home screens are where you can find your favorite widgets and all your applications.
Status bar: Displays status and notification icons
Display area: Displays app icons, folders, and widgets
App drawer: Tap to open application list
Dock component bar: Shortcuts to your frequently
used applications
Organize widgets on the Home screen
• Add a widget to the Home screen
Add frequently used widgets to the Home screen for quick access.
1. On the Home screen, touch and hold a blank area (or pinch two fingers together) on the screen to
access the Home screen editor.
2. Tap Widgets and select a widget. Tap the widget to add to the Home screen and drag it to a blank
area you like. Or you can just touch and hold the widget and drag it to target area.
3. Tap a blank area on the Home screen (or tap Home Button/Back button) to quit the Home screen editor.
Note:
1. You must have enough space on the Home screen to add widgets. If there is not enough space, add another Home
screen (see Add a Home screen) or free up some space.
• Move a widget
On the Home screen, touch and hold an widget and then drag it to the desired location.
• Delete a widget
On the Home screen, touch and hold the widget you want to delete and then move it to Remove in the
status bar.
Organize folders on the Home screen
• Create a folder
Create Home screen folders to organize your applications as desired. For example, you can create a Camera
folder that contains all of your camera applications.
1. On the Home screen, drag an icon onto another icon to create a folder containing both applications.
2. To name the new folder, open the folder, tap Unnamed Folder and enter the folder name.
Basics
8Chapter 2 .
• Rename a folder
On the Home screen, open the folder and touch the folder name, then enter the new name.
• Add apps to a folder
On the Home screen, touch and hold the application you want to remove, then drag it to the folder you
want to add it to.
• Remove apps from a folder
1. On the Home screen, open the folder.
2. Touch and hold the application you want to remove, then drag it out of the folder.
• Delete a folder
You can delete a fold in two ways:
• On the Home screen, open the folder. Remove all the applications in it, then the folder will be
automatically deleted.
• Touch and hold the folder and drag it to Remove in the status bar. The folder and icons in it will be
deleted together.
Organize applications on the Home screen
Pop up box
Notification
Notification dot
• App pop up box
On the Home screen, touch and hold an application to open the pop up box. You can:
• View App info: Tap App info or .
• Use shortcut to go to the screen you want to go quickly: Tap the shortcut.
• Add the widget to Home screen: Tap Widgets or . Touch and hold the widget and drag it to your
target area.
• Add the shortcut to Home screen: Touch and hold the shortcut and drag it to your target area.
Note:
Widget and shortcut only appear when the app includes related content.
• Notification dot
Touch and hold the app with notification dot to view the notification. Tap to open and swipe left or right
to remove the notification.
• App drawer
On the Home screen, tap or swipe up on the dock component bar to expand app drawer. All of your
applications sorted by name. You can tap to search the App you need.
• Move an application
On the Home screen, touch and hold an application and then drag it to the desired location.
Basics
9Chapter 2 .
• Add an app icon to the Home screen
1. On the Home screen, tap or swipe up on the dock component bar to expand app drawer.
2. Touch and hold an app and drag it to a blank area you like.
• Uninstall an application
On the Home screen, touch and hold the application you want to remove, then drag it to Uninstall in the
status bar.
Note:
Some pre-installed system applications cannot be uninstalled.
• Remove an application icon
On the Home screen, touch and hold the application you want to remove, then drag it to Remove in the
status bar.
• Batch moving icons
1. On the Home screen, touch and hold a blank area on the screen (or pinch two fingers together) to
access the Home screen editor.
2. Tap Adjustment. Tap or drag the icons to put them in the adjustment at the bottom.
3. Swipe left or right to choose the target Home screen.
4. Tap or drag the icons in adjustment to add them to the target Home screen.
5. Tap a blank area on the Home screen (or tap Home Button/Back button) to quit the Home screen editor.
Manage Home screen
On the Home screen, touch and hold a blank area on the screen (or pinch two fingers together) to open the
Home screen editor. You can:
• Add a Home screen
Swipe left and tap on the rightmost screen to add a new screen.
• Delete a Home screen
Tap on the Home screen to delete it.
Note:
Only blank Home screen can be deleted.
• Adjust screen order
Touch and hold the screen you want to move and drag left or right to adjust page order.
• Set the default home screen
Tap at the top of a Home screen to set the chosen Home screen as default. On the default Home screen,
will display at the top.
Set the Home screen wallpaper
1. On the Home screen, touch and hold a blank area (or pinch two fingers together) to open the Home screen
editor.
2. Tap Wallpapers, and follow the onscreen instructions to set the picture as the Home screen or lock
screen wallpaper (or both).
Note:
You also can set the Home screen wallpaper on Themes (see Change the wallpaper), or go to Settings -> Display
-> Wallpaper.
Home screen settings
On the home screen, touch and hold a blank area (or pinch two fingers together) on the screen to access the
Home screen editor. Then tap Settings, you can:
• Manage notification dots: Tap Notification dots. You can choose the dot style and toggle the switch to
enable or disable the function.
Basics
10Chapter 2 .
• Enable or disable app drawer: Tap App drawer and tap to turn on or turn off App drawer.
• Add icons to the Home screen automatically: When you turn on the switch, the new apps downloaded
from Play Store will be added to Home screen automatically.
2. 3 Access applications
Launch and switch between applications
• From the Home screen: Tap an icon to launch the corresponding application.
• From the Locked screen: Swipe up to launch the camera application. Swipe up to open the toolkit.
Sound Recorder
Calculator Flashlight
• Switch to another application: Tap the Home button to return to the Home screen, and then tap the
icon of the application you want to open. Or you can tap Recent apps button to view the recently used
applications, then tap the application you want to open. Double-tap Recent apps button to switch to the
previous application.
Clock
Viewing recently used applications
Tap Recent apps button to display the list of recently used applications.
• View more applications: Swipe up or down on the screen to view more recently used applications.
• Open an application: Tap a thumbnail to open the corresponding application.
• Close an application: Swipe left or right on a thumbnail to close the corresponding application, or you can
tap on a thumbnail to close it.
• Close all applications: Tap to close all applications.
Basics
11Chapter 2 .
2. 4 Status bar
Use the status bar to access the Quick Settings Panel, Notification Panel and check your phone’s status.
Status icons
Status icons are displayed on the right-hand side of the status bar and tell you about your phone’s status,
including network connections, signal strength, battery, and time.
Status icons
E
3G
4G
Indications
Battery low
Charging
Battery full
Battery saver enabled
Signal strength
No signal
Connected over GPRS
Connected over 3G
Connected over LTE
Headset mic inserted
WLAN connected
Vibrate mode enabled
Bluetooth enabled
Hotspot enabled
No SIM card installed
Do not disturb enabled
Airplane mode enabled
Data saver enabled
Alarms enabled
Notification icons
Notification icons are displayed on the left-hand side of the status bar when you receive a new message and
other notifications.
Notifications icons
Downloading status
Uploading data
Download complete
Call in progress
Missed calls
New messages
Hotspot enabled
Connected to a PC using USB cable
Indications
Basics
12Chapter 2 .
2. 5 Notification Panel
Notification Panel collects all the notifications and alerts so that you can review them whenever you like.
• Open Notification Panel: Swipe down from the status bar to open the Notification Panel.
• View a notification: Tap an item to view the details. New notifications, such as missed calls and messages
are displayed on the Lock screen. From the Lock screen, double-tap it to view the details, or swipe left or
right to remove it.
• Clear notifications: Swipe the notification left or right to remove the it from the list. You can also tap to
remove all the notifications at once.
• Quickly manage notification: Touch and hold the notification detail to open the quick settings screen. Tap MORE SETTINGS to go to the notification management page. For more information, see Notifications.
• Close Notification Panel: Swipe up, or tap the Home button/Back button.
2. 6 Quick Settings Panel
Use shortcut switches on the Quick Settings Panel to enable or disable functions quickly without using a
settings menu.
• Open the Quick Settings Panel: Swipe down from the status bar, or swipe down and tap to open the
Quick Settings Panel.
• Use shortcut switches: Tap the shortcut switches on the Quick Settings Panel to turn the functions on or off.
Touch and hold the shortcut icon to enter the feature’s settings page.
• Close the Quick Settings Panel: Swipe up, or tap the Home button or Back button.
Basics
13Chapter 2 .
Edit: Tap to enter the edit page
Settings: Tap to go to Settings
Collapse/expand the panel: Tap to collapse the Quick Settings Panel
Shortcut switches: Tap to enable/disable functions quickly
Brightness slider: Use this slider to adjust the brightness of the screen
Adaptive brightness: Tap to enable auto-brightness
Adjust the position of shortcut switches
Edit the content
Choose language
Set the Keybord Choose the theme
Insert emoji
Tap it and then tap a letter to
type uppercase.
Double-tap for caps lock.
Delete the characters to the
left of the cursor.
Start a new line.
Enter numbers, punctuations
and symbols.
Enter a comma. Touch and
hold it to turn on/off
prediction.
Enter a space.
Double-tap to end a sentence with a period.
Touch and hold to open Google voice typing
Enter a period. Touch and
hold to enter a symbol.
Open the Quick Settings Panel and tap to enter the edit page. You can:
• Rearrange shortcut switches: Touch and hold a shortcut switch and then drag the icon to a position of your
choice.
• Add a shortcut switch: Drag a shortcut switch from the bottom section of the panel to the top section.
• Remove a shortcut switch: Drag a shortcut switch from the top section of the panel to the bottom section.
• Reset Quick Settings Panel: Tap -> Reset to reset the Quick Seetings Panel to default settings.
2. 7 Type text
Enter text
The keyboard enables you to enter text when needed. Your phone use Touchpal by default.
Touch and hold the letter to enter the number or symbol next to it.
Basics
14Chapter 2 .
Spell checker
You can turn on the Spell checker feature to help you enter correct words.
1. Go to Settings -> More general settings -> Languages & input -> Spell checker.
2. Turn on the switch.
Switch input method
1. On the Home screen, tap Settings -> More general settings -> Languages & input -> Virtual
keyboard.
2. Select an input method you need. By default, you can choose Touchpal, AndroidTM keyboard or Google
Voice Typing.
2. 8 Take a screenshot
Capture the entire screen
You can capture the entire screen by following ways:
• Press the Power button and Volume-down button at the same time.
• Open the Quick Settings Panel, then tap Screenshot.
• Slide down three fingers on the screen.
• If you enabled float button (see Float button), tap -> Screenshot.
Take scrolling screenshots
Use scrolling screenshots to take screenshots longer than one page, such as conversation threads.
1. Take a full screenshot for the entire screen first.
2. To take a scrolling screenshot, ensure that you touch the thumbnail within 3 seconds after taking the
screenshot. Tap the below the thumbnail of the scrollshot. The screen will scroll down and capture all of
the content in one screenshot. Tap the screen to stop scrolling and capture the preceding content.
Scroll capturing...
Basics
Tap to end scrolling
END SCROLLING
15Chapter 2 .
Edit/Share/Delete the screenshot
Tap the thumbnail after capturing the screen, you can:
• Edit the screenshot: tap .
• Share the screenshot: tap .
• Delete the screenshot: tap .
2. 9 Configure your fingerprint
Use the fingerprint sensor to unlock the screen, take photos and unlock apps.
Enroll a fingerprint for the first time
For added security and to ensure that you can still access your data if your phone fails to recognize your
fingerprint, you will need to set a backup screen lock method when configuring fingerprint unlock.
1. Go to Settings -> Screen lock, fingerprint & security -> Fingerprint management.
2. Select Pattern or PIN or Password, and then follow the onscreen instructions to set a screen lock password.
3. Once you have configured the password, tap Add fingerprint.
4. Place your fingertip on the fingerprint sensor. Press down lightly on the sensor until your phone vibrates.
Repeat this step using different parts of your fingertip until your phone has successfully added your
fingerprint.
5. Once you have added your fingerprint, tap OK.
Note:
1. When recording your fingerprint, make sure the fingerprint sensor and your fingers are dry and clean.
2. For more security settings, see Screen lock, fingerprint and security.
Add, delete or rename your fingerprint
Add multiple fingerprints to make it easier to unlock your phone. You can also delete or rename your fingerprints.
1. Go to Settings -> Screen lock, fingerprint & security -> Fingerprint management.
2. Enter the screen lock pattern/password/PIN.
3. In the Fingerprint list section, you can:
• Add a fingerprint: Tap Add fingerprint to add a new fingerprint. You can add up to five in total.
• Rename/delete a fingerprint: Tap a previously added fingerprint to rename or tap to delete it.
4. After you enter several fingerprint, there is a list showing all the recorded fingerprint. When you place your
fingertip on the fingerprint sensor, the corresponding place turns grey, which helps you easily find the
fingerprint.
Use fingerprint to take photos or record videos
When using the camera, tap the fingerprint sensor to take a picture or record a video.
If you don’t want to use this function:
• Go to Settings -> Gestures and smart assistance -> Press and hold your fingerprint to capture,
and turn off the switch to disable the function.
• Go to Camera, swipe right and tap , then switch off Press and hold your fingerprint to capture.
Access App lock with fingerprint
1. Go to Settings -> Screen lock, fingerprint & security -> Fingerprint management, and enter the
screenlock method you have set.
2. Tap Access App lock.
Basics
16Chapter 2 .
• If you have enabled App lock before, just switch on Access App lock, and then you can use fingerprint
to access App lock.
• If you have not enabled App lock, you need to set a Pattern, PIN or password first. Follow the onscreen
instructions to enble App lock.
3. Go to Settings -> Screen lock, fingerprint & security -> App lock. Place your fingerprint on the sensor
to enter App lock.
4. In the UNENCRYPTED APPS list, turn on the switches next to the apps that you want to encrypt.
Note:
You can also go to Settings- > Screen lock, fingerprint & security ->App lock -> and switch on Fingerprint verification to enable using fingerprint access App lock.
2. 10 Configure your face data
Use the facial recognition to unlock your phone.
After waking up your phone screen, you can unlock your phone by looking at the screen.
Add your face data for the first time
For added security and to ensure that you can still access your data if your phone fails to recognize your face
data, you will need to set a backup screen lock method when configuring fingerprint unlock.
1. Go to Settings -> Screen lock, fingerprint & security -> Facial recognition, and choose the
appropriate method to add face data.
• If you have set a pattern, PIN, or password as the screenlock method, enter the screenlock method.
• If you have not set a pattern, PIN or password as the screenlock method, select one and follow the
onscreen instructions to complete.
2. Tap Add face data and follow the onscreen instructions to register your face data and enable the facial
recognition. Then you can use facial recoginiton to unlock your phone.
Delete your face data
1. Go to Settings -> Screen lock, fingerprint & security -> Facial recognition.
2. Enter the screenlock method and tap Remove face data -> DELETE.
2. 11 Split-screen mode
Use split-screen mode to use two apps at the same time.
Enable spilt-screen mode
1. Open an app and tap Recent apps button to open recents apps list.
2. Touch and hold an app, then drag it up. Then you can open another app, and it will be displayed at the
bottom of the screen.
Basics
17Chapter 2 .
Note:
Split-screen mode is not available for all apps. Some apps may not function properly in split-screen mode.
Switch to full screen mode
Touch and hold , and swipe it up or down to switch to full screen mode.
Basics
18Chapter 2 .
3
Share your phone data with others by various kinds of connections.
• WLAN
• Mobile data
• Connect to computer
• Bluetooth
• Share your mobile data with other devices
• Smart WLAN
Network and Share
3. 1 WLAN
Connect to a WLAN network to access the Internet and reduce mobile data usage.
Note:
Your personal data and financial information may be at risk if you connect to insecure public WLAN networks.
Connect to a WLAN network
Enable WLAN to connect to the Internet using a WLAN access point or hotspot.
If appears in the status bar, you are connected to a WLAN network.
1. Swipe down from the status bar to open the Quick Settings Panel.
2. Touch and hold WLAN to open the WLAN settings screen.
3. Turn on the switch. A list of available WLAN networks will be displayed.
• Refresh the list: Tap to refresh the available WLAN list.
• Add a WLAN network that is not shown in the list: Swipe down to the bottom of the list and tap Add
network. Follow the onscreen instructions to configure the WLAN settings and password.
4. Select the WLAN network you want to connect to, and then enter the password if needed. (You can also
turn WLAN on in Settings -> WLAN.) Your phone will remember WLAN networks that you have used
before and reconnect to them automatically when you enable WLAN.
Connect to a WLAN network through WPS
Connecting to a WPS-enabled router over WPS allows you to quickly connect to the network without entering
a password. Go to Settings -> WLAN and you can connect to your router in following two ways:
• Tap -> WPSpushbutton and press the router’s WPS button.
• Tap -> WPS pin entry to generate a PIN, and then enter the PIN on the router.
Advanced WLAN settings
Go to Settings -> WLAN -> -> Advanced, you can configure these settings:
• Saved networks: Tap Saved networks to view the networks remembered by your device. Tap a network
and tap FORGET to forget it.
• Open network notification: Turn on the switch to enable notifying when a high-quality public network is
avaible.
• Install certificates: Tap Install certificates to and follow the onscreen instructions to install certificates.
• Choose network rating provider: Tap to choose the provider of network rating. Google is the default
provider. You can also choose None to choose network rating.
Network and Share
19Chapter 3 .
• Install certificates: Tap Install certificates and follow the onscreen instructions to install certificates.
• View MAC and IP address: On the Advabced, you can view your MAC and IP address.
WLAN direct
Use WLAN direct to transfer files between your phone and another device without connecting to a WLAN
network. WLAN direct is similar to Bluetooth but offers faster transfer speeds, making it suitable for the transfer
of larger files such as videos.
Note:
1. Using WLAN direct to transfer files needs third-party applications support.
2. Before using this function, check that both two devices you want to connect support WLAN direct.
• Connect two devices using WLAN direct
1. Switch on WLAN on both two devices.
2. Go to WLAN -> -> WLAN direct, your phone will search for devices automatically.Then keep the
WLAN direct search screen open on both devices.
3. When your phone detects the other device, select it. Follow the onscreen instructions to establish a
WLAN direct connection between the two devices.
• Rename your device
On WLAN direct screen, tap Device name. Enter the device name you want and tap OK to Save.
• Manage peer device and remembered groups
On WLAN direct screen, you can view your Peer devices and Remembered groups. Tap a peer device
and tap OK to disconnect. Tap a remembered group and tap OK to forget the group.
3. 2 Mobile data
Before using mobile data, ensure that you have a data plan with your carrier to avoid incurring excessive data
charges.
Connect to mobile data
You can connect to mobile data in following three ways:
• Swipe down from the status bar to open the Quick Settings Panel and tap . When it lights up, mobile
data is enabled.
• Swipe down from the status bar to open the Quick Settings Panel. Touch and hold to enter the mobile
data settings. Turn on the Mobiledata switch.
• Go to Settings -> Dual-SIM & network and switch on Mobile data.
Note:
1. If a WLAN connection to the Internet isn’t available, apps and services may transfer data over your carrier’s cellular
network, which may result in additional fees. Contact your carrier for information about you mobile data plan rates.
2. When you don’t need to access the Internet, disable mobile data to save battery power and reduce data usage.
3. 3 Connect to computer
Transfer the data on your phone to your computer or transfer the data on your computer to your phone.
When you use a USB cable to connect your phone with a computer or another device, Allow access to device data will be displayed in a popup dialog. Tap ALLOW to allow file transfer between your phone and the
computer. Tap DENY to deny data conncection and charge only.
Select the USB connection mode
Swipe down from the status bar to open the Notification Panel, and then tap the USB connection notification.
You can choose from the following USB connection modes:
Network and Share
20Chapter 3 .
• Charge this device: Charge your phone only.
• Transfer files: Transfer files between your phone and the computer.
• Transfer photos (PTP): Transfer images between your phone and the computer.
• Use device as MIDI: Use your phone as a MIDI input device and play MIDI files on the computer.
3. 4 Bluetooth
You can share data on your phone with other devices using Bluetooth. And you can use Bluetooth to connect
your phone to Bluetooth headsets and in-car Bluetooth to navigate or listen to music while you drive. You can
also connect your phone to Bluetooth wearables to record and manage fitness data.
Enable Bluetooth and pair your phone with another device
1. Swipe down from the status bar to open the Quick Settings Panel.
2. Touch and hold Bluetooth to enter the Bluetooth settings. Tap the switch to turn it on. (You can also
turn Bluetooth on in Settings -> Bluetooth). Your phone will automatically list available devices. If the
device you want to pair with is not displayed, check whether the device is discoverable.
3. Select the device you want to pair with and follow the onscreen instructions.
Send and receive files using Bluetooth
Check that both devices are paired before attempting to transfer files.
1. Send files: Tap the file you want to send and tap > Bluetooth. Your device will automatically search for
nearby devices. Select the receiving device.
2. Receive files: When another device tries to send you files using Bluetooth, select ACCEPT from the dialog
box that appears. Open the Notification Panel to view file transfer progress. By default, received files are
saved to File manager -> Internalstorage -> bluetooth folder.
Unpair Bluetooth devices
Go to Settings -> Bluetooth. Tap the icon next to the paired device, and then tap FORGET.
Rename your phone
1. On the Home screen, tap Settings -> Bluetooth and turn on the switch.
2. Tap Devicename.
3. Edit the device name and tap OK to complete the configuration.
3. 5 Share your mobile data with other devices
You can share your phone’s mobile Internet with other devices (such as phones, tablets, or computers). The
following Internet sharing methods can be used:
Use WLAN hotspot
Set up a portable WLAN hotspot to share your phone’s mobile Internet with other devices. Compared with
Bluetooth tethering, the portable WLAN hotspot feature offers quicker, longer range connections, but power
consumption is higher.
1. On the Home screen, go to Settings -> More connection settings -> Hotspot & tethering.
2. Switch on Protable WLAN hotspot. After enabling your personal WLAN hotspot, will be displayed in
the status bar.
3. Tap Set up WLAN hotspot to configure following settings:
Network and Share
21Chapter 3 .
• Change the hotspot name: The Name is the hotspot name. By default, this is the name of your phone
model. You can manually change the name to something that is easier to remember. Tap Name to edit
the name of your hotspot and tap SAVE.
• Change the security setting: Tap Security to configure security setting. Your phone uses WPA2 PSK
encryption by default. Other devices will require a password to connect to the hotspot. If you choose
None, devices will not require a password to connect to the hotspot.
• Configure a password that is easy to remember: The hotspot password is generated randomly by your
phone. For security reasons, choose a password that is not easy to guess. Tap Password and enter the
new password (the password must have at least 8 characters), then tap SAVE.
• Select AP Band: Tap Select AP Band to choose 2.4 GHz Band or 5 GHz Band.
• Set the maximum connections: Tap Maximumconnections and select the number of maximum.
• Set the time for keeping hotspot on when idle: Set the time for keeping WLAN hotspot on when idle.
Tap Keep WLAN hotspot on on to choose the duration.
Note:
Your device can’t access the Internet using WLAN when your Portable WLAN hotspot is turned on.
Use USB tethering
Use a USB cable to share your phone’s mobile Internet with a computer. This is useful if your computer’s Internet
connection stops working. To enable mobile data, see Connect to mobile data.
1. Connect your phone to a computer using a USB cable.
2. On the Home screen, go to Settings -> More connection settings -> Hotspot & tethering.
3. Switch on USB tethering. After enabling USB tethering, your phone will display the icon in the status
bar. You can then use the computer to access the Internet.
Note:
Depending on your computer’s operating system, you may need to install phone drivers on the computer or establish a
network connection in order to use USB tethering. Please read the instructions for your operating system.
Use Bluetooth tethering
Use Bluetooth tethering to turn your phone into a wireless router and share your mobile Internet with other
devices. Compared with a portable hotspot, Bluetooth tethering offers a slower Internet connection, but
consumes less power.
1. Establish a Bluetooth connection between two devices and check that they are paired. For more information,
see Enable Bluetooth and pair your phone with another device.
2. On the Home screen, go to Settings -> More connection settings -> Hotspot & tethering.
3. Switch on Bluetooth tethering to share your mobile Internet.
4. Go to Settings ->Bluetooth and tap the device you want to connect. Other devices can now connect
and use your mobile data.
3. 6 Smart WLAN
Use smart WLAN to share WLAN password, connect to router and extend WLAN.
Share WLAN password
When connected to WLAN, you can share the password with other devices.
On the Home screen, tap SmartWLAN -> Share WLAN password to proceed to QR code screen (You
can also tap the connected WLAN in the WLAN networks list to proceed to QR code screen). You can share the
password in following two ways:
• Show the QR code. For the other device, see Connect to WLAN by scanning the QR code.
• Touch and hold Password and choose Copy or Share to share the password.
Network and Share
22Chapter 3 .
Note:
This feature is currently only supported on Neffos and in some third-party apps.
Connect to WLAN by scanning the QR code
1. On the Home screen, go to SmartWLAN-> Scan.
2. Align the QR code within the frame, or tap to select a photo to scan. Then your device will connect to
the shared WLAN automatically.
Note:
When ambient light is not enough, you can tap to turn on light.
Connect to router through WPS
WPS allows your phone to connect to a WPS-enabled router without having to remember a password.
On the Home screen, tap SmartWLAN-> WPS and press the router’s WPS button.
You also can go to Settings -> WLAN to connect. For more information, see Connect to a WLAN network
through WPS.
WLAN extender
Use WLAN extender function to extend WLAN signals to a wider area.
• Extend the WLAN
Before using this feature, ensure that you have connected to the WLAN.
On the Home screen, tap SmartWLAN -> WLAN Extender and turn on the switch. When WLAN
Extender is open, will appear in the status bar.
• Set WLAN Extender
On the Home screen, tap SmartWLAN -> WLAN Extender -> Set WLAN Extender. You can
configure following settings:
• Change the netword name: Tap Name to set netword name, and then tap SAVE. The Network name is
the WLAN Extender name. By default, this is the name of your phone model. You can manually change
the name to something that is easier to remember.
• Security: Your phone uses WPA2 PSK encryption by default.
• Configure a password that is easy to remember: The network password is generated randomly by your
phone. For security reasons, choose a password that is not easy to guess.
• Select AP Band: Tap Select AP Band to choose 2.4 GHz Band or 5 GHz Band.
• Set Maximum connections: Tap Maximum connection to choose the maximum connections.
• Set duration of WLAN Extender: Set the time for keeping WLAN extender on when idle. Tap Keep WLAN
extender on to choose the duration.
• Manage the users
On the Home screen, go to SmartWLAN -> WLAN Extender. The connected and blocked devices
will be displayed on the list. Select any of the connected devices to set the following options:
• View the details of the connected device: Tap a connected device to view the MAC address and IP
address.
• Block a device: Tap the connected device you want to block and tap BLOCK. The blocked device can’t
search your WLAN extender singals.
• Unblock a devide: Tap the blocked device you want to unblock and tap UNBLOCK.
Network and Share
23Chapter 3 .
4
Make calls with your phone to contact one quickly.
• Make a call
• Answer or reject a call
• Options during a call
• Call log
• Manage contacts
• Harassment filter
• Call settings
• Advance settings
• Contacts
Calls
4. 1 Make a call
Dial directly from the dialer
1. On the Home screen, tap Phone -> .
2. Enter the number of a contact in the dialer. Your phone will search your contacts and call log and list the
results above the dialer.
3. Select the contact you want to call (Or tap after entering the complete number). If you have inserted
two SIM cards, select SIM1 or SIM2 to dial (Or tap / after entering the complete number).
Note:
Check Always use this for calls and tap SIM1/SIM2 to make SIM1 or SIM 2 as the default SIM card to make calls. If you want
to change the default SIM card, or if you want to deactivate one of them, go to Settings -> Dual-SIM & network to
configure. For more information, see Dual SIM and network.
Dial a recent number from the Recent calls
All incoming, outgoing and missed call are in Recent calls.
1. On the Home screen, tap Phone -> Recent calls, a list of recent calls will be displayed.
2. Tap the number or contact to call.
Dial from contact list
1. On the Home screen, tap Phone -> Contacts.
2. Tap a contact and then tap the number to dial.
Dial from contact list and call log search results
1. On the Home screen, tap Phone.
2. Tap and enter the name, initials, or number of a contact in the dialera contact.
3. Tap the contact or number to dial.
Note:
If no results appear, you can tap Call to dial directly, or tap Send SMS to send a message to the number.
Make an international call
Before making a long-distance call, contact your carrier to activate international calling or roaming services.
24Chapter 4 . Calls
Loading...
+ 74 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.