Topcon FC-200 User Manual

INSTRUCTION MANUAL

BTManager 2.0

for FC-200 with Windows CE5.0

64852 90190

TOC

Table of Contents

Getting Started with Bluetooth Manager ................... 1-1

Starting Bluetooth Manager ............................................. 1-1

Getting Acquainted .......................................................... 1-2

Using Bluetooth Manager ............................................ 2-1

Discovering Devices ........................................................ 2-1

Adding to the List of

Favorite Devices ........................................................... 2-4

Viewing Device Properties .............................................. 2-6

Deleting a Device from the List ....................................... 2-7

Choosing Device Accessibility ........................................ 2-8

Pairing Bluetooth Devices ............................................... 2-9

P/N 7010-0833

i

Table of Contents

Notes:

ii

FC-200 CE.Net BTManager User’s Manual

Chapter 1

Getting Started with Bluetooth Manager

This manual describes Bluetooth® Manager (BTManager) 2.0 used
on the Topcon field controller FC-200 with the CE.Net operating
system.

The BTManager utility controls the FC-200 Bluetooth module.

Starting Bluetooth Manager

To start the BTManager:

1. Turn on the FC-200.

2. Tap the Bluetooth icon in the system tray, and select Bluetooth

Manager from the pop-up menu.

Figure 1-1. Starting Bluetooth Manager

1-1

Getting Started with Bluetooth Manager

3. If the Bluetooth transmitter is switched off (the menu item is
gray), select Turn Transmitter On to turn on Bluetooth.

Getting Acquainted

Table 1-1 summarizes the screens and settings in BTManager,

Table 1-1. BTManager Screens

Description Screen

Type of devices to detect

This screen displays types of
devices to pair with. Once a device
type is selected, the Discovery
Wizard searches for those devices
when you tap Next.

Device List

This screen displays all discovered
devices of a selected type. From
this list, you can choose a device to
pair with and add it to your List of
Favorite Devices by tapping Next.

1-2

FC-200 CE.Net BTManager User’s Manual

Table 1-1. BTManager Screens (Continued)

Description Screen

List of Favorite Devices

This screen displays your preferred
Bluetooth-enabled devices to pair
with. Selecting a device and
tapping ViewDetails displays
detailed information about that
device.

My Bluetooth Device

This screen displays the internal
FC-200 Bluetooth module
information. Enabling
Discoverable allows other devices
to detect your FC-200. Enabling
Authentication confirms the
identity of other devices trying to
pair with your FC-200.

Getting Acquainted

1-3

Getting Started with Bluetooth Manager

Table 1-1. BTManager Screens (Continued)

Description Screen

Bluetooth Device Pairing

This screen prompts the Wizard to
search for the device you have
selected to pair with when you tap

Next.

About BTManager

This screen displays version and
copyright information for the
BTManager.

1-4

FC-200 CE.Net BTManager User’s Manual

Chapter 2

Using Bluetooth Manager

Before the FC-200 can pair with another Bluetooth-enabled device, it
must discover which devices are available within your coverage area.
You can then add these devices to the List of Favorite Devices. Upon
first opening the BTManager, the List is empty.

Figure 2-1. List of Favorite Devices

Discovering Devices

To discover other Bluetooth-enabled devices within your coverage
area:

1. Tap Too ls Device Discovery.

2-1

Using Bluetooth Manager

Figure 2-2. Tools menu - Device Discovery

The Discovery Wizard appears (Figure 2-1).

2-2

Figure 2-3. Discovery Wizard

FC-200 CE.Net BTManager User’s Manual

Discovering Devices

2. Tap Next to display a list of device types.

Figure 2-4. Device Types

3. Choose a type of devices to discover, and tap Next.

The Discovery Wizard searches for Bluetooth-enabled devices in
your coverage area and displays the icons of the devices it
discovers on the Device List.

As device names and addresses are retrieved, the Device List
updates with detailed information.

Figure 2-5. Discovered Devices

Once the Device List is populated, you can add any device from this
list to the List of Favorite Devices.

2-3

Using Bluetooth Manager

Adding to the List of Favorite Devices

The Devices List displays all discovered Bluetooth-enabled devices in
your coverage area.

To add a device from the Devices List to the List of Favorite Devices:

1. Select a device, and tap Next. You can choose more than one
device.

2-4

Figure 2-6. Select Device(s)

FC-200 CE.Net BTManager User’s Manual

Adding to the List of Favorite Devices

A confirmation message appears when the devices are
successfully added to the List of Favorite Devices.

Figure 2-7. Devices Added

2. Tap Finish to exit the Wizard and display the List of Favorite

Devices.

The List of Favorite Devices shows all devices your FC-200 is
currently paired with. You can view devices by icon and name or by
name and address.

Figure 2-8. Bluetooth Devices Folder - Name and Icon View

2-5

Using Bluetooth Manager

To display the list of devices by name and address, tap

ViewDetails.

Figure 2-9. Bluetooth Devices Folder - Name and Address View

Viewing Device Properties

To view the properties of a device, select the device in the List of
Favorite Devices, and tap DeviceProperties.

The Bluetooth Device Properties screen displays major and minor
class identifiers, the name, and address of the selected device. The
screen also shows the services supported by the device. Depending on
the device type, the supported services can include Limited,

2-6

FC-200 CE.Net BTManager User’s Manual

Deleting a Device from the List

Positioning, Networking, Rendering, Capturing, Object_XFER,
Audio, Telephony, and Information.

Figure 2-10. Bluetooth Device Properties

Deleting a Device from the List

To delete a device from the List of Favorite Devices:

1. Select the device, and tap DeviceDelete.

A confirmation message appears.

2. Tap Yes to delete the device.

Figure 2-11. Deleting a Device

2-7

Using Bluetooth Manager

Choosing Device Accessibility

To select accessibility settings for the internal FC-200 Bluetooth
Module, tap DeviceMy Bluetooth Device.

The My Bluetooth Device screen displays information about the
internal FC-200 Bluetooth module and if external devices can
discover/pair with it.

Figure 2-12. My Bluetooth Device

My Bluetooth Device always displays the following information:

• Class (major and minor)

• Name (Other devices use this name to identify the FC-200.)

• Address

This screen also allows you to enable the following accessibility
options:

• Discoverable: allows other devices to find the FC-200

• Authentication: authenticates the identity of other devices

BTManager allows the FC-200 to connect with other Bluetooth­enabled devices using serial port or dial-up services:

• SPP (Serial Port Profile): provides serial port connection with
peripheral Bluetooth-enabled devices, including GPS
receivers which normally do not require authentication.

2-8

FC-200 CE.Net BTManager User’s Manual

Pairing Bluetooth Devices

• DUN (Dial-up Networking Profile): provides a standard to
access dial-up services over Bluetooth. The most common
scenario is connecting to a phone.

Pairing Bluetooth Devices

Pairing establishes communication between devices by exchanging
PINs and addresses. Once communication is established and
authentication occurs, these devices become “trusted” devices and
will no longer have to authenticate for future connections. The List of
Favorite Devices displays all of the discovered Bluetooth-enabled
devices your FC-200 can pair with.

To pair with a Bluetooth-enabled device from the List of Favorite
Devices:

1. Select the device, and tap DevicePair.

Figure 2-13. Device Menu - Pair

The Pairing Wizard appears to guide you through the pairing
process.

2. Tap Next to continue.

2-9

Using Bluetooth Manager

The Wizard searches for the other device.

Figure 2-14. Pairing with Remote device

When the Wizard discovers the other Bluetooth-enabled device,
you are prompted to enter a passkey (PIN) for authentication. The
same passkey must be entered on both devices to establish
authentication and pairing. Authentication is only required the
first time the two devices pair.

Figure 2-15. Enter Passkey (PIN)

3. Enter a passkey, and then tap Next.

2-10

FC-200 CE.Net BTManager User’s Manual

Pairing Bluetooth Devices

4. If the passkey on the remote device is changed or revoked, an
error message appears. Tap OK to change the current passkey.

Figure 2-16. Change Current Passkey

A congratulation message appears when the pairing is successful.

Figure 2-17. Successful Pairing

5. Tap Finish to exit the Wizard.

2-11

©2007 TOPCON CORPORATION
ALL RIGHTS RESERVED