TC-Helicon VSM-200 XT User Manual

VSM-200 XT

USER MANUAL

a

IMPORTANT SAFETY INSTRUCTIONS

Voltage Line plug according to standard.

110-125V UL817 and CSA C22.2 no 42.

220-230V CEE 7 page VII, SR section 107-2-D1/IEC 83 page C4.

240V BS 1363 of 1984. Specification for 13A fused plugs and switched and un-switched socket outlets.

The lightning flash with an arrowhead symbol within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the product.

1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A

grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the

apparatus.
11 Only use attachments/accessories specified by the manufacturer.
12

Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13 Unplug this apparatus during lightning storms or when unused for long periods of time.
14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-

supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

Warning!

• To reduce the risk of fire or electrical shock, do not expose this equipment to dripping or splashing and ensure that no objects filled with liquids,

such as vases, are placed on the equipment.

• This apparatus must be earthed.

• Use a three wire grounding type line cord like the one supplied with the product.

• Be advised that different operating voltages require the use of different types of line cord and attachment plugs.

• Check the voltage in your area and use the correct type. See table below:

• This equipment should be installed near the socket outlet and disconnection of the device should be easily accessible.

• To completely disconnect from AC mains, disconnect the power supply cord from the AC receptable.

• The mains plug of the power supply shall remain readily operable.

• Do not install in a confined space.

• Do not open the unit - risk of electric shock inside.

Caution:

You are cautioned that any change or modifications not expressly approved in this manual could void your authority to operate this equipment.

Service

• There are no user-serviceable parts inside.

• All service must be performed by qualified personnel.

b

Certificate Of Conformity

TC Electronic A/S, Sindalsvej 34, 8240
Risskov, Denmark, hereby declares on its
own responsibility that the following product:

VoiceSolo VSM-200 XT - Active Voice

Monitor

- is covered by this certificate and marked
with CE-label conforms with following
standards:

EN 60065 Safety requirements for mains
(IEC 60065) operated electronic and

related apparatus for household
and similar general use

EN 55103-1 Product family standard for

audio,video, audio-visual and
entertainment lighting control
apparatus for professional
use. Part 1: Emission.

EN 55103-2 Product family standard for

audio, video, audio-visual and
entertainment lighting control
apparatus for professional
use. Part 2: Immunity.

With reference to regulations in following
directives:
73/23/EEC, 89/336/EEC

Issued in Risskov, 10 - 2007

Mads Peter Lübeck

Chief Executive Officer

EMC / EMI.

This equipment has been tested and found to comply with the
limits for a Class B Digital device, pursuant to part 15 of the FCC
rules.

These limits are designed to provide reasonable protection against
harmful interference in residential installations. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on. The user is encouraged to try to correct
the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for

help.

For the customers in Canada:

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.

IMPORTANT SAFETY INSTRUCTIONS

33

TABLE OF CONTENTS

VoiceSolo VSM-200 XT Rev 1.0
English version Prod. no: 606120071

Table of Contents . . . . . . . . . . . . . . . . . . . . .3

Introduction . . . . . . . . . . . . . . . . . . . . . . . . .4

Front panel diagram . . . . . . . . . . . . . . . . . . .6

Back panel diagram . . . . . . . . . . . . . . . . . . .7

Mic stand mounting procedure . . . . . . . . . .8

Using VoiceSolo XT . . . . . . . . . . . . . . . . . .11

Setup diagrams . . . . . . . . . . . . . . . . . . . . .12

Specifications . . . . . . . . . . . . . . . . . . . . . .14

Specifications, interface, and features are subject to change without notice due to continued product improvement