7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than
the other. A grounding-type plug has two
blades and a third grounding prong. The
wide blade or the third prong is provided for
your safety. If the provided plug does not fit
into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked
on or pinched, particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning
storms or when unused for long periods of
time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been
dropped.
Caution
You are cautioned that any change or modifications not expressly approved in this manual
could void your authority to operate this equipment.
Service
– All service must be performed by qualified
personnel.
Warning
– To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or moisture
and objects filled with liquids, such as vases,
should not be placed on this apparatus.
This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable
protection against harmful interference in residential installations. This equipment generates,
uses and can radiate radio frequency energy
and, if not installed and used in accordance with
the instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
For customers in Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
Explanation of
graphic symbols
The lightning bolt triangle is used to
alert the user to the presence of uninsulated “dangerous voltages” within
the unit’s chassis that may be of sufficient magnitude to constitute a risk of
electric shock to humans.
The exclamation point triangle is used
to alert the user to presence of important operating and service instructions
in the literature accompanying the
product.
– Reorient or relocate the receiving antenna.
– Increase the separation between the equip-
ment and receiver.
– Connect the equipment into an outlet on a cir-
cuit different from that to which the receiver is
connected.
– Consult the dealer or an experienced ra-
dio / TV technician for help.
Hall of Fame Mini Reverb 2
About this manual
About this manual
This manual will help you learn understanding
and operating your TC product.
To get the most from this manual, please
read it from start to finish, or you may miss
important information.
This manual is only available as a PDF download
from the TC Electronic website.
Of course, you can print this manual, but we encourage you to use the PDF version, which has
both internal and external hyperlinks. For example, clicking the TC Electronic logo in the upper
left corner of each page will take you back to the
table of contents.
To download the most current version of this
manual, visit tcelectronic.com/support/manuals/
Enjoy your TC product!
TonePrint-enabled
This TC Electronic product
supports TonePrints. Follow
the icon to learn more about
TonePrints, or go to
tcelectronic.com/toneprint/
Download TC Electronic’s free TonePrint Editor and start creating beautiful effects right
now!
To download TonePrint Editor for free, go to
tcelectronic.com/toneprint-editor/
Hall of Fame Mini Reverb 3
Introduction
Introduction
Never judge a book by its cover – or a guitar
effect pedal by its size.
Hall of Fame Mini Reverb was designed by musicians for musicians to give you an amazing reverb pedal that takes up virtually no space on
your pedal board.
Add in the TonePrint concept – and you will find
that the possibilities are virtually endless:
– Replace the classy, well-known TC Electronic
Hall reverb that comes with your Hall of Fame
Mini Reverb by something more unconventional – for example, the Eighties’ classic “Gated Reverb” or an old-school spring reverb.
– Download your favorite artist’s TonePrint –
and discover the true potential of a top-notch
effect fine-tuned by a top artist.
– And this is just the beginning. Because with
TC Electronic’s TonePrint Editor, you will be
able to embark on a journey to your personal
Reverb Heaven, creating a reverb that expresses your musical personality better than
anything else in the world.
Welcome to the world of professional reverbs
– in a box that will fit in the palm of your hand.
Giants of Reverb –
in a Bonsai format
TC Electronic is synonymous with some of
the best sounding reverbs out there.
Think of a song with reverb on it that you have
heard in the last 20 years – and chances are it’s
us!
TC Electronic has built a very impressive library
of first-class reverb algorithms – and with Hall
of Fame Mini Reverb, we put they key to this reverb kingdom in your hands. All you need is an
Internet connection – and the courage to experiment. Just download the free TonePrint Editor
and load top-notch reverb TonePrints from our
ever-growing library right into your Hall of Fame
Mini Reverb.
Hall of Fame Mini Reverb supports all the beautiful reverb TonePrints that made the original Hall
of Fame an instant classic – and you can use
every TonePrint that was created for the original
Hall of Fame Reverb and its siblings Trinity Reverb and Arena Reverb.
Enjoy!
Reverb TonePrints in the TonePrint Editor’s
Library view. Pick your favorite reverb and send
it to your Hall of Fame Mini Reverb in seconds!
! Please note that you will need version 2.0
or higher of the TonePrint Editor for your
Hall of Fame Mini Reverb.
Version 2.0 of TonePrint Editor not only adds
support for Hall of Fame Mini, but also has a
Library function that allows you to access and
use TC Electronic’s pristine reverb algorithms
even without an Internet connection.
Hall of Fame Mini Reverb 4
Loading...
+ 12 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.