Taylor C122 Specifications

Rockton, Illinois 61072

800-255-0626

Phone [phone] Fax [phone]

www.taylor-company.com

e-mail: [e-mail]

International Office
Taylor Company S.r.l.
Roma, Italy
Tel: [phone] Fax: [phone]
e-mail: [e-mail]

C122

Item No.

_______________________________

C122

Serve homemade, medium overrun gourmet ice cream,
custard, gelato, sorbet, Italian ice and slush. Mix and liquid
flavorings may be poured into the convenient fill chute on the
door. Fruits, candies and nuts can be folded in as product is
being drawn into your container. Manufactured in Italy by
Frigomat to ensure European equipment quality and
technology to serve gelato or medium overrun frozen
desserts.

Freezing Cylinder

One, 8.5 quart (8.0 liter).

Consistency Control

Viscosity is controlled by setting the control in two alternate
positions.

Electronic Consistency Control

Automatically senses product viscosity to control the refrigeration
system for perfect ice cream quality, batch after batch.

Variable Batch Size

Adjust to second, lower viscosity setting, for smaller pre-charge of
mix.

Features

Batch Ice Cream Freezer

621

C122

C122Batch Ice Cream Freezer

16-15/16

(430)

27-3/16

(690)

33-1/2

(850)

4

(102)

6-7/8
(175)

NOTE: FIGURES IN PARENTHESES INDICATE MILLIMETERS.

ELECTRICAL
CONN.

(CONNECTIONS LOCATED IN

LOWER AREA OF REAR PANEL)

Electrical

One dedicated electrical connection is required. See the Electrical chart for
the proper electrical requirements. Manufactured to be permanently
connected. Consult your local Taylor distributor for cord & receptacle
specifications as local codes allow.

Beater Motor

One, 1.5 HP beater motor.

Refrigeration System

One, approximately 11,500 BTU/hr. R404A.
(BTUs may vary depending on compressor used.)

Air Cooled

Minimum 6” (152 mm) on both sides and 12” (305 mm) at rear. Minimum air
clearances must be met to assure adequate air flow for optimum performance.

Taylor Company,

A Division of Carrier Commercial Refrigeration, Inc.
Rockton, Illinois 61072
815-624-8333 800-255-0626 Fax [phone]

www.taylor-company.com

Printed in U.S.A.

Weights lbs. kgs.

Net 315 143
Crated 377 171

cu. ft. cu. m.

Volume 16.4 0.46

Dimensions in. mm.

Width 16-15/16 430
Depth 33-1/2 850
Height 27-3/16 690
Counter Clearance 4 102

*Mounted on standard legs

Bidding Specs

Electrical: Volt ___________________ Hz__________ ph _________

Neutral:  Yes No Cooling:  Air  Water  NA

Options:_________________________________________________
_________________________________________________________

Specifications

062221-ADV

8/09

Continuing research results in steady improvements; therefore, these

specifications are subject to change without notice.

Electrical Maximum Minimum Poles (P)
Fuse Size Circuit Ampacity Wires (W)

208-230/60/1 Air 25 20 2P 3W

This unit may be manufactured in other electrical and cooling characteristics.
Refer to the local Taylor Distributor for availability.
(For exact electrical information, always refer to the data label of the unit.)