Page 1
Product Spec Sheet
Stereo Master Recorder/ADDA Converter
DA-3000
■ Main Features
●High-Performance Master Recorder
>Stereo recording at high sampling frequencies of up to 192kHz PCM and 5.6MHz DSD
>Variety of inputs and outputs to handle diverse recording situations
>Upgraded user interface
>Simultaneous multitrack recording and playback with multiple cascaded units
●High-Quality Audio Circuits Enable Use for the DA-3000 as an ADDA Converter
>Dual mono circuits eliminate interference between left and right channels
>Low noise achieved with fully balanced circuitry and high-quality AD converter
>Numerous high-quality parts selected carefully using evaluation tests
>Power supply section and high-precision TCXO supports high audio quality
>Fanless design eliminates unwanted noise during monitoring and operation
※ Don’ t use a wireless remote controller when you use multiple units except using the cascade function.
※
Please take 1U or more of blank space above the DA-3000 for ventilation.
DA-3000 Product Spec Sheet
Oct, 2013
■ Features at a glance
・ Stereo recording to SDHC card or CF card
・ PCM recording format: BWF
・ DSD recording format: DSDIFF/DSF
・ SD card slot
・ CF card slot
・ WAV file playback
・ Cascade function enables simultaneous operation of multiple units
・ Recording 2 mono files from stereo input possible
・ Mark functions can be used set up to 99 points per file
BWF format)
・ When recording, designation of the recording file folder possible
・ Synchronized recording
(supports 4 to 32GB SDHC cards)
(supports UDMA)
(44.1/48/88.2/96/176.4/192kHz, 16/24bit)
(2.8/5.6MHz)
using level, stop time and recording start delay time setting
-
1- TEAC CORPORATION
(mark information can be used in software that supports
Page 2
DA-3000 Product Spec Sheet
・ Input level can be adjusted in 0.5dB step
・ Using automatic track incrementing function, new files can be created automatically while continuing to
record when a condition
・ Manual track incrementing function can be used whenever you like to create a new track while continuing
to record
・ Automatic mark functions can be used to easily check problems
during recording
・ File name format can be set to either a user-defined word or the date and time
・ Repeat playback function
・ Folder playback function can be used to play all files in a folder
・ Playlist function allows files to be programmed in advance for playback
・ Divide and delete functions can be used to manage files that are already recorded
・ UNDO function can be used to cancel the previous operation
・ USB host port supports copying between USB flash drives and CF/SDHC cards
・ File names can be changed
・ Direct location possible when a USB keyboard is connected
・ Word clock master can be set to Internal, Word input or Digital inputs
・ Analog input and output reference levels can be set to -9/-14/-16/-18/-20dBFS
・ Digital input has a sampling rate converter
・ Audio files prepared on a computer can be played back
・ Oscillator function (440Hz, 1kHz, 10kHz)
・ Input monitoring function allows input signals to be output without recording
・ Updating is possible
・ EI core transformer used in power supply section
・ Dual mono circuits eliminate interference between left and right channels
・ Fully-balanced circuits realize low noise
・ 128x64 OEL display with a wide viewing angle
・ 24-dot stereo LED level meters with adjustable brightness make checking levels easy
・ TCXO with 1ppm precision
・ Backup memory stores settings even when the power is off
・ Fanless design eliminates unwanted noise
・ Aluminum front panel harmonizes with other studio equipments design
・ Operation possible using included RC-10 wireless remote control
・ Standard 1/4” headphones jack provides 45mW/ch output
・ USB port for USB keyboard
・ USB port for USB flash drive
・ XLR digital input/output
・ RCA Coaxial digital input/output
・ BNC digital input/output for DSD
・ RCA analog unbalanced input/output
・ XLR analog balanced input/output
・ EIA 1U rackmount size
・ RoHS compliant
※ Don’ t use a wireless remote controller when you use multiple units except using the cascade function.
Please take 1U or more of blank space above the DA-3000 for ventilation.
(level, file size, digital input)
(all files or single file)
(supports USB 1.1)
(supports USB 2.0)
(supports AES3-2003 and IEC60958-4:AES/EBU formats)
(supports IEC60958-3:S/P DIF format)
(supports SDIF-3 and DSD-raw formats)
set in advance occurs
(supports 32 to 216kHz)
(if in a format supported for playback by this unit)
(levels, word clock unlocking)
detected
-
2- TEAC CORPORATION
Page 3
■ Specifications
Media and formats
Supported media
SD
CF
USB (Playback and copying only)
Recording and playback formats
PCM
DSD
Number of channels
Inputs and outputs
ANALOG INPUTS (UNBALANCED)
Standard input level
Maximum input level
Minimum input level
Input impedance
ANALOG INPUTS (BALANCED)
Standard input level
Maximum input level
Minimum input level
Input impedance
ANALOG OUTPUTS (UNBALANCED)
Standard output level
Maximum output level
Output impedance
ANALOG OUTPUTS (BALANCED)
Standard output level
Maximum output level
Output impedance
PHONES
Maximum output
DIGITAL IN (COAXIAL)
Format
Input frequency
Allowable frequency deviation
DIGITAL OUT (COAXIAL)
Format
DIGITAL IN (AES/EBU)
Format
Input frequency
Allowable frequency deviation
DIGITAL OUT (AES/EBU)
Format
DIGITAL IN (SDIF-3)
Format
Clock synchronization frequency
DIGITAL OUT (SDIF-3)
Format
Clock synchronization frequency
DA-3000 Product Spec Sheet
Supports 4GB to 32GB SDHC cards (Media ejection method: push-push)
Supports 1GB to 64GB Type I CF cards
Supports 2GB to 64GB USB flash drives
BWF (rec/play) / WAV (playback only), 44.1/48/88.2/96/176.4/192kHz, 16/24bit
DSDIFF / DSF, 2.8224/5.6448MHz
2 mono (or 1 stereo)
RCA pin jacks
-10dBV
+6dBV
-22dBV
22kΩ or greater
XLR-3-31 (1:GND, 2:HOT, 3:COLD)
+4dBu, +6dBu (only when maximum input level is +15dBu)
+15/+18/+20/+22/+24dBu (switchable in menu)
-8dBu, -6dBu (only when maximum input level is +15dBu)
10kΩ or greater
RCA pin jacks
-10dBV
+6dBV
200Ω or less
XLR-3-31 (1:GND, 2:HOT, 3:COLD)
+4dBu, +6dBu (only when maximum input level is +15dBu)
+15/+18/+20/+22/+24dBu (switchable in menu)
100Ω or less
Standard 6.3mm (1/4’ ) stereo jack
45mW + 45mW (into 32Ω load, 0.1% distortion)
RCA pin jacks
IEC60958-3 (S/P DIF)
44.1/48/88.2/96/176.4/192kHz (when SRC OFF), 32〜216kHz (when SRC ON)
+/-100ppm (when SRC OFF)
RCA pin jacks
IEC60958-3 (S/P DIF)
XLR-3-31 (1:GND, 2:HOT, 3:COLD)
AES3-2003/IEC60958-4 (AES/EBU)
44.1/48/88.2/96/176.4/192kHz (when SRC OFF), 32〜216kHz (when SRC ON)
+/-100ppm (when SRC OFF)
XLR-3-32 (1:GND, 2:HOT, 3:COLD)
AES3-2003/IEC60958-4 (AES/EBU)
BNC connectors
SONY SDIF-3/DSD-raw
44.1kHz
BNC connectors
SONY SDIF-3/DSD-raw
44.1kHz
-
3- TEAC CORPORATION
Page 4
WORD SYNC IN
Input level
Input impedance
Input frequency
Allowable frequency deviation
WORD SYNC THRU/OUT
Output level
Output impedance
Output frequency
Frequency stability
USB (DEVICE)
Protocol
Power rating
USB (KEYBOARD)
Protocol
Power rating
Audio performance (rec/play)
Distortion (THD+N, 1kHz)
S/N
PCM
DSD
Frequency response
Fs 44.1/48kHz
Fs 88.2/96kHz
Fs 176.4/192kHz
DSD
Crosstalk
Audio performance (playback)
Distortion (THD+N, 1kHz)
S/N
PCM
DSD
Frequency response
Fs 44.1/48kHz
Fs 88.2/96kHz
Fs 176.4/192kHz
DSD
Control input and output
Infrared receiver
General
Power
Power consumption
Dimensions (WxHxD mm)/weight
Operating temperature range
Standard accessories
DA-3000 Product Spec Sheet
BNC connectors
5V TTL equivalent
75Ω +/-10% (built-in terminal ON/OFF switch)
44.1/48/88.2/96/176.4/192kHz
+/-100ppm
BNC connectors
5V TTL equivalent
75Ω +/-10%
44.1/48/88.2/96/176.4/192kHz (built-in THRU/OUT switch)
+/-1ppm 以下 (Ta=25℃)
4-pin USB A-type
USB2.0 HIGH SPEED (480Mbps)
DC5.0V 0.5A
4-pin USB A-type
USB1.1 HIGH SPEED (12Mbps)
DC5.0V 0.2A
0.003% or less (Ref:-16dB/BALANCE, JEITA), 0.005% or less (UNBALANCE, JEITA)
113dB or higher (Ref:-20dB/BALANCE, JEITA), 111dB or higher (UNBALANCE, JEITA)
106dB or higher (Ref:-20dB/BALANCE, AES-17, 20k LPF), 104dB or higher
(UNBALANCE, AES-17, 20k LPF)
20Hz – 20kHz, +0.1/-0.5dB (JEITA)
20Hz – 40kHz, +0.1/-1dB (JEITA)
20Hz – 80kHz, +0.1/-6dB (JEITA)
20Hz – 50kHz, +0.1/-3dB (JEITA) / 20Hz – 100kHz, +0.1/-12dB (JEITA)
108dB or higher (JEITA)
0.003% or less (BALANCE, JEITA), 0.001% (UNBALANCE, JEITA)
118dB or higher (Ref:-20dB/BALANCE, JEITA), 116dB or higher (UNBALANCE, JEITA)
116dB or higher (Ref:-20dB/BALANCE, AES-17, 20k LPF), 114dB or higher
(UNBALANCE, AES-17, 20k LPF)
20Hz – 20kHz, +0.1/-0.1dB (JEITA)
20Hz – 40kHz, +0.1/-0.3dB (JEITA)
20Hz – 80kHz, +0.1/-3dB (JEITA)
20Hz – 50kHz, +0.1/-3dB (JEITA) / 20Hz – 100kHz, +0.1/-12dB (JEITA)
TASCAM RC-10 wireless remote controller
AC120V, 60Hz (US/Canada Version)
AC220-240V, 50-60Hz (UK/EUR/Australia Version)
24W
483 x 45 x 305 / 4.2kg
0 〜 +40℃
3P power cord, Wireless remote controller (TASCAM RC-10), coin battery for testing
remote control (preinstalled), screw kit for rack-mounting, warranty card, Owner’ s
manual
-
4- TEAC CORPORATION
Page 5
■ Dimensions
DA-3000 Product Spec Sheet
__________________________________________________________________________
_________________________________________________________________________
※TASCAM is trademark of TEAC CORPORATION, registered in the U.S. and other countries.
※Other company names, product names and logos are the trademarks or registered trademarks of their
owners.
※Specifications and appearance are subject to change without notice.
※All information included in this document is as of Oct, 2013.
-
5- TEAC CORPORATION
Loading...