Supermicro X11SCH-F, X11SCH-LN4F User Manual

UPERMICR

!

S

X11SCH-F/-LN4F

Quick Reference Guide 1.00

R

ContaCt InformatIon

• Website: www.supermicro.com

• General Information: [e-mail]

• Technical Support: [e-mail]

• Phone: [phone], Fax: [phone]

For your system to work properly, please download appropriate

drivers/images/user's manual From the links below:

• Manuals: http://www.supermicro.com/support/manuals

• Drivers & Utilities:

https://www.supermicro.com/wftp/driver

• Safety: http://www.supermicro.com/about/policies/safety_information.cfm

Package contents

• One (1) Supermicro Motherboard

• One (1) I/O Shield

• Six (6) SATA Cables

• One (1) Quick Reference Guide

WARNING: This product can expose you to chemi cals including
lead, known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information, go
to www.P65Warnings.ca.gov.

Motherboard Layout and Features

MH13

JOH1

JPG1

LEDBMC

CPU SLOT5 PCI-E 3.0 X8

+

SP1

BT1

Intel

C246

I-SATA6

I-SATA7

JSD1

Lift Lever
and Remove
Protective
Cover

into Place

JWD1

MH12

JPME2

JD1

JIPMB1

LEDSSD2

M.2-P_1

USB2/3

JBT1

USB4/5

I-SGPIO2

I-SGPIO1

1

I-SATA0

I-SATA1

I-SATA2

I-SATA3

I-SATA4
I-SATA5

JL1

CPU Installation

Plastic Protective
Cover

Load Lever

CPU / Socket
Keys

CPU Properly
Installed

Note: Graphics shown in this quick reference guide are for illustration only. Your components may or may not look exactly the same as drawings shown in this
guide.

Load Plate

Pin 1

Load Lever Locked

LE1

JUIDB1

ASpeed

AST2500

CPU SLOT6 PCI-E 3.0 X8(IN X16)

DESIGNED IN USA

REV:1.01

X11SCH-F

MH11

+

MH10

BAR CODE

USB9/10 (3.0)

LEDSSD1

FANB

JTPM1

JSD2

M.2-P_2

USB8 (3.0)

Heatsink Installation

Thermal Paste

Push down

Lock

Unlock

VGA

LAN2/LAN4

Intel
i210

MEGERAC
LICENSE

FANA

FAN3

Connect the Heatsink Wire to the

CPU Fan Header

LAN1/LAN3

Intel
i210

CPU

USB6/7(3.0)

DIMMA1

DIMMA2

DIMMB1

JSTBY1

JLD2

JLD1

COM1

IPMI_LAN

USB0/1

DIMMB2

MAC CODE

IPMI CODE

COM2

FAN2

FAN4

JPWR2

JF1

LEDPWR

JPI2C1

JPWR1

FAN1

JF1

PWR

ON

RST

FAIL

PS

LED

UID

NIC

2

NIC

1

LED

HDD

LED

PWR

X

NMI

= mounting hole

Front Control Panel (JF1)

3.3V

UID SW

3.3V

NMI

1 2

X

19

20

PWR

Reset

Power Button

Reset Button

UID LED

3.3V LAN

3.3V LAN

Ground

Ground

Power Fail LED

OH/Fan Fail LED

NIC2 Active LED

NIC1 Active LED

HDD LED

PWR LED

X

Ground

Connectors and LED Indicators

Connectors

Connector Description

BT1 Onboard Battery

COM1, COM2 COM Port, COM Header

FAN1 ~ FAN4
FANA, FANB

IPMI_LAN Dedicated IPMI LAN Port

I-SATA0 ~ I-SATA7 Intel® PCH SATA 3.0 Ports (with RAID 0, 1, 5, 10)

I-SGPIO1, I-SGPIO2 Serial Link General Purpose I/O Headers

JLD1 LAN3 Activity LED Connector (X11SCH-LN4F only)

JLD2 LAN4 Activity LED Connector (X11SCH-LN4F only)

JD1 Power LED Indicator/Speaker Header

JF1 Front Control Panel Header

JIPMB1 4-pin BMC External I2C Header (for an IPMI card)

JL1 Chassis Intrusion Header

JOH1 Overheat/Fan Fail LED Header

JPI2C1 Power I2C System Management Bus (SMB) Header

JPWR1 24-pin ATX Power Supply Connector

JPWR2 8-pin Power Connector

JSD1, JSD2 SATA DOM Power Connectors

JSTBY1 Standby Power Header

JTPM1 Trusted Platform Module (TPM)/Port 80 Header

JUIDB1 Unit Identier (UID) Switch

LAN1 ~ LAN4 1GbE LAN Ports

M.2-P_1, M.2-P_2 M.2 Slots for PCI-E 3.0 x4

MH10 ~ MH13 M.2 Mounting Holes

SLOT5 CPU PCI-E 3.0 x8 Slot

SLOT6 CPU PCI-E 3.0 x8 (in x16) Slot

SP1 Onboard Buzzer

USB0/1 Back Panel Universal Serial Bus (USB) 2.0 Ports

USB2/3, USB4/5 Front Accessible USB 2.0 Headers

USB6/7 Back Panel USB 3.1 Gen 2 Ports

USB8 USB 3.1 Gen 1 Type-A Header

USB9/10 Front Accessible USB 3.1 Gen 1 Header

VGA VGA Port

LED Description Status

LE1 Unit Identier (UID) LED Solid Blue: Unit Identied

LEDBMC BMC Heartbeat LED Blinking Green: BMC Normal

LEDPWR Onboard Power LED Solid Green: Power On

LEDSSD1, LEDSSD2 M.2 LED Blinking Green: Device Working

Note: Refer to Chapter 1 of the User Manual for detailed information on jumpers, connectors,
and LED indicators.

CPU/System Fan Headers

I-SATA6 and I-SATA7 supports SuperDOM

(Pins 1-3: Power LED; Pins 4-7: Speaker)

X11SCH-F Only: LAN1 ~ LAN2
X11SCH-LN4F Only: LAN1 ~ LAN4

(Supports M-Key 2280 / 22110 and Intel Optane Memory)

LED Indicators

Jumpers

Jumpers

Jumper Description Default

JBT1 CMOS Clear Open (Normal)

JPG1 VGA Enable Pins 1-2 (Enabled)

JPME2 ME Manufacturing Mode Pins 1-2 (Normal)

JWD1 Watchdog Timer Pins 1-2 (Reset)

CPU Support

The X11SCH-F/-LN4F supports an Intel® Xeon® E-2100, 8th Generation Core i3,

Pentium, and Celeron (Socket H4 - LGA 1151) series processor with a thermal

design power (TDP) of up to 95W and six cores.

Memory Support and Installation

The X11SCH-F/-LN4F supports up to 64GB of unbuffered (UDIMM) DDR4 (288-

pin) ECC memory (2-DIMM per channel) with speeds of up to 2666MHz in four

memory slots. See below for additional memory information.

• The blue slots must be populated rst.

• Always use DDR4 memory of the same type, size, and speed. Mixed DIMM

speeds can be installed. However, all DIMMs will run at the speed of the slow-

est DIMM.

• The motherboard will support odd-numbered modules. However, to achieve the

best memory performance, a balanced memory population is recommended.

1 CPU, 4-DIMM Slots

Number of DIMMs Memory Population Sequence

1 DIMMB2

2 DIMMB2/ DIMMA2

(Unbalanced: Not Recommended)

3

4 DIMMB2 / DIMMA2 / DIMMB1 / DIMMA1

Back Panel I/O Connectors

X11SCH-F

2

3

1

X11SCH-LN4F

# Description # Description # Description

1 COM1 5 USB7 (USB 3.1 Gen 2) 9** LAN3 (-LN4F only)

2 Dedicated IPMI LAN 6 USB6 (USB 3.1 Gen 2) 10** LAN4 (-LN4F only)

3 USB1 7 LAN1 11 VGA Port

4 USB0 8 LAN2 12 UID Switch

Note: Refer to Chapter 2 of the User Manual for detailed information on memory support and CPU/
motherboard installation instructions.

4

5

6

DIMMB2 / DIMMA2 / DIMMB1

7

9

8

10

11

11

12

12

MNL-2105-QRG-100

© 2018 Supermicro Computer Inc. All rights reserved. Reproduction of this document whether in part or in whole is strictly prohibited without Supermicro's written

consent. All Trademarks are property of their respective entities. All information provided is deemed accurate at the time of printing; however, it is not guaranteed.