Silvercrest URC 101 DT,URC 101 DT Operation And Safety Notes
Yleiskaukosäädin
Käyttö- ja turvaohjeet
u niversalfjärrkontroll
Bruksanvisning och säkerhetsanvisningar
u niversal remote Control
Operation and Safety Notes
3A
Universal
ReMOte
COntROl
Last Information Update · Tietojen tila · Informationsstatus:
06 / 2009 · Ident.-No.: 062009-3 A
IAN: 33137
COMAG Handels AG
Zillenhardtstraße 41
D-73037 Göppingen
3A
100% Black+Silver
for light surfaces
#
Faulty-Description:
GUARANTEE
Sender please use block-writing in boxes with CAPITAL LETTERS
Surname
Firstname
Street
Postcode and city
Telephone no. with area code
UNIVERSAL REMOTE CONTROL
Signature of buyer
PLEASE CUT THIS CARD AND ENCLOSE IT TO THE RETURNING GOOD
•
•
f
r
o
m
p
u
r
c
h
a
s
e
-
d
a
t
e
•
•
•
•
3
6
m
o
n
t
h
s
•
•
Guarantee
COMAG
Service Centre
Unit 1 Longs
Industrial Estate
Englands Lane
Gorleston Great
Yarmouth
Norfolk NR31 6BE
Service-Hotline:
00 44 (0) 8708 900137
E-mail:
info@comag-ag.co.uk
Universal Remote Control
10 in 1
10 in 110 in 1
10 in 1
Instruction manual
Version 2.2_GB, 08.06.2009
Technical data, design, equipment and items supplied subject to
change.
Introduction
This instruction manual explains the
• intended use,
• safety measures
• advantages
of this universal remote control (to be known as the
remote control).
This instruction manual does not describe in detail how to
use the remote control with your device. Please see the
information and instructions in the manual for your
device.
Everyone who
• starts
• uses
• cleans
• disposes of
this remote control must fully understand the contents of
this instruction manual.
This instruction manual is a component of the product.
Always store the instruction manual near the remote
control.
3
Instruction manual layout
This instruction manual is written in such a way that
certain layout elements correspond to certain kinds of
information. This makes it easier to distinguish between
normal text,
• lists
and
actions.
• All buttons are shown in the instruction manual
with the corresponding button number and
sometimes with a picture of the button e.g. EXIT
button (16) .
• The navigation buttons (13) will be shown
using the symbols and .
• Using the buttons you can go one step forward
or backwards in the menus.
• Information that appears on the screen will be
shown either as a picture of the display e.g.
Or as text with a grey background e.g. CODE
SETUP.
• Where you see the
symbol extra information
will be given.
4
Table of contents
Introduction....................................................................................... 2
Instruction manual layout ................................................................ 3
Table of contents .............................................................................. 4
Safety instructions ...........................................................................6
Intended use ....................................................................................... 6
Important safety instructions ......................................................6
Avoiding suffocation............................................................................6
Avoiding injury ....................................................................................7
Avoiding damage ................................................................................ 7
Safe use of batteries........................................................................... 8
Safety warnings ..................................................................................9
Items supplied.................................................................................10
Description ...................................................................................... 11
Inserting the batteries .................................................................... 12
Button layout...................................................................................14
Using your remote control............................................................. 17
Menu Navigation ............................................................................. 19
Cancelling an action .........................................................................20
Code Functions...............................................................................21
Choosing device codes via the display............................................. 21
Entering a device code from the code list......................................... 23
Manual code search .........................................................................24
Code search by manufacturer name ................................................26
Identifying the code...........................................................................28
Using combi devices......................................................................... 28
System set up options / Punch Through...................................... 31
Programming Punch Through (VOL / MUTE) onto another type of
device................................................................................................32
Turning off Punch Through (VOL/MUTE) for a certain device ......... 33
5
Reverting the Punch Through (VOL/MUTE) back to factory
settings..............................................................................................34
Punch Through playback function ....................................................35
Settings............................................................................................37
Setting the time................................................................................. 37
Setting the date................................................................................. 38
Backlight ........................................................................................... 39
RESET - factory settings ..................................................................40
Timer Settings................................................................................. 42
Setting the sleep timer ...................................................................... 43
Turning the sleep timer off ................................................................ 44
Command timer ................................................................................ 44
Programming the command timers .................................................. 45
Learn Function................................................................................ 49
Using the learn function .................................................................... 49
Programming commands..................................................................51
Deleting commands .......................................................................... 53
Macros ............................................................................................. 55
Programming macros ....................................................................... 56
Building in delays.............................................................................. 57
Carrying out macros .........................................................................58
Deleting macros................................................................................ 58
ALL OFF Function .......................................................................... 60
After use .......................................................................................... 61
Cleaning the remote control .............................................................61
Not using the remote control for an extended period of time ........... 61
Hints and Tips / Troubleshooting ................................................. 62
Glossary ..........................................................................................64
Disposal........................................................................................... 66
Technical Data ................................................................................67
Manufacturer ................................................................................... 68
Warranty .......................................................................................... 69
Declaration of Conformity..............................................................70
6
Safety instructions
Read the safety instructions carefully before you use the
remote control.
Take note of all warnings in the manual.
Intended use
The remote control is for the indoor use and set up of
consumer electronic devices.
It is intended exclusively for this use and may only be
used for this purpose. It may only be used as described
in this instruction manual. Any other usage not as
intended can lead to damage to the remote control or to
devices.
Important safety instructions
Avoiding suffocation
• Never allow children to play with the plastic bag or
other packaging.
• Keep the plastic bag or other packaging away from
children.
7
Avoiding injury
• There is a Class 1 laser in the infra red diode of
the remote control.
• The device is fitted with a safety system that
prevents dangerous laser streams from leaving the
device during normal use. To avoid damaging your
eyes, never manipulate or damage the device's
safety system.
Avoiding damage
• Never sit on the remote control and do not place
any heavy objects on it.
• Clean the remote control regularly.
• Do not use any harsh products when cleaning the
remote control
• Always use qualified professionals to repair and
service the remote control.
• Do not expose the remote control to dust, strong
sunlight, moisture, high temperatures or strong
vibrations.
8
Safe use of batteries
• Keep batteries away from children. If a battery is
swallowed, seek immediate medical attention.
• When inserting the batteries check that the
contacts in the device and the batteries are not
dirty. Clean them if necessary.
• Always use new batteries. Do not use old and new
batteries together.
• Do not mix different types of batteries.
• Check the batteries are inserted with the correct
polarity (+/-).
• WARNING! If the batteries are not changed
correctly they could explode. Only replace
batteries with the same or equivalent type.
• Never attempt to recharge batteries as they could
explode!
• Store batteries in a cool, dry place. Direct, intense
heat can damage the batteries. Never put the
remote control on a powerful heat source.
• Never short circuit the batteries.
• Never throw the batteries into fire.
• If the remote control is not going to be used for a
long period of time, remove the batteries.
• Take leaking batteries out of the remote control
straight away. There is a danger of corrosion due
to battery acid.
• Clean the contacts with a clean dry cloth before
you insert new batteries.
9
Safety warnings
In this instruction manual there are the following
categories of safety warnings:
Danger!
Instructions with the word DANGER warn about
possible bodily injury.
Warning!
Instructions with the word WARNING warn about
possible damage to property or the environment.
Useful advice about using the remote control
10
Items supplied
After purchase ensure you have the following:
No. 1 No. 2
Universal Remote Control LR 03/AAA/1.5V Batteries
(May differ from shown)
No. Quantity Explanation
1 1 Universal Remote Control
2 1 pair LR 03/AAA/1.5V Batteries
1
1
1
Base
(not shown)
Instruction manual
(not shown)
Code List with device codes
(not shown)
11
Description
This remote control has 10 device buttons (source
buttons) and can therefore replace up to ten normal
remote controls ("10 in 1 function"). These could be
remote controls for practically any type of consumer
electronic device.
The description on source button (2) (TV, VCR, CBL,
ASAT, DSAT, DVD, AUX1, CD, AMP, AUX2) are for
convenience only.
With the exception of the button you can use all the
buttons with each device in "Flex-Mode".
Further instructions about "Flex-Mode" can be found on
page 21 in the Code Functions chapter.
12
Inserting the batteries
Reverse of the remote control:
2 LR03/AAA/1.5V batteries are required (included).
To remove the battery compartment cover press the lock.
Lift and remove the battery compartment cover. Insert
both batteries into the compartment, paying close
attention to the polarity +/-. Replace the cover.
Settings after changing the batteries
When the batteries are correctly inserted the display is
switched on. It will show the active mode ("TV"), the day
of the week and the time.
13
To set the time and date please read the Settings chapter
on page 37.
After battery insertion the mode, time, date, and the back
light duration will revert back to the factory settings.
After you have inserted the batteries you can begin to
program your universal remote control with your devices.
With the common infra red codes the remote control
works with most but not all makes and models.
This remote control offers functions that your device
might not be able to use. Some special functions of your
device may not be supported by the remote control. In
this case it can learn the commands from your original
remote control using the learning function and transfer
them to itself.
It may be that some of the functions of the device must
be implemented differently on the universal remote than
on the original remote. Please read these instructions
completely before use to get to know all the options of
your remote control. Also read the instructions of the
devices that you wish to operate with the remote control
14
Button layout
15
1. LCD Display
(schematic representation of all segments)
2. Source buttons (devices):- TV, VCR, CBL, ASAT,
DSAT, DVD, AUX1, CD, AMP, AUX2
3. Number buttons: 0-9 for direct choice of channel
4. : Select AV input / switch to external devices
5. : Opens the device menu (if available)
6. : Mute button.
7. VOL +/-: Volume control up/down
8. TELETEXT: Colour buttons for operating Teletext
functions
9. Operating buttons for Video Recorder / CD / DVD
: Record
This button must be pressed twice to start recording.
: Stop
: Pause
: Play
: Fast Forward
: Rewind
10. : Turn Teletext on.
Device specific, on some devices this button will also
be used for turning Teletext on and off.
: Stop at a specific Teletext page.
: Display or choice of channel information.
16
: Teletext and TV at the same time
: Turn Teletext off.
11. CH +/-: Change channel
12. : Confirm options.
13. : Navigation buttons.
14. : Show electronic programme information
(dependent on channel and device).
15. : Macro functions.
16. : Exit or go back a step in menus and device
functions.
17. : Programming mode and shift function button
18. : Enter two digit numbers in combination with
the number buttons.
19. : Turn the devices on and off.
Transmitting and receiving diode
Behind the transparent cover is the transmitting diode
which sends the infra red signals and the receiving diode
which learns the codes of other remote controls.
17
Using your remote control
Standard Display
The active mode (device type) is shown on the first line
e.g. DVD
The day of the week and the time is shown on the second
line.
Selecting a mode or device
With a source button (2) you can select a mode or device
that you wish to program to this source button.
The description of the corresponding source button (2) is
shown on the first line e.g.
The code that has been programmed to the device is
shown on the second line as long as the source button
(2) is pressed.
Setup (Shift) Button
After briefly pressing the setup button (17) the
active device group e.g. DVD, will appear on the first line
next to the sign for the activated shift function (S). The
date will appear on the second line.
18
Press the EXIT button (16)
to go back to the
standard display.
Most buttons can be used for two functions. To access
the second function activate the shift function.
Prolonging battery life
Should a button accidentally remain pressed down (e.g.
because an object is lying on the remote control) the
remote control will send 350 infra red signals (this takes
about 30 seconds) and stops the transmission. This
prevents the batteries from being drained unnecessarily.
Display after pressing buttons
Every time a button is pressed the symbol
“transmitting” appears on the display
Settings after changing the batteries
When the batteries are correctly inserted the display is
switched on. It will show the active mode ("TV"), the day
of the week and the time.
TV Mode
When selecting the
button there is no option to select
the type of device because the source button (2)
can
only be programmed with TV codes.
19
Menu Navigation
To open the setup menu hold down the setup button (17)
until the display shows and the word
"SET" appears, press the setup button (17)
again
to call up further menus:
CODE SETUP > SYSTEM SETUP > TIMER SETUP >
LEARN SETUP > MACRO SETUP > EXIT SETUP
To open a menu, press OK (12) .
To select between the sub menus, press the navigation
buttons and .
1 CODE SETUP - to programme
device codes by inputting a code or
by using the search function.
2 SYSTEM SETUP - for time / date
and altering volume etc.
3 TIMER SETUP –
to program timers
4 LEARN SETUP –
to learn functions
5 MACRO SETUP –
to program macros
6 EXIT SETUP –
to exit the setup menu
20
Cancelling an action
If you wish to cancel an action, wait about 25 seconds
(the time is dependant on where the action was stopped)
until the setup menu closes itself automatically and
appears on the display.
Whilst the remote control is carrying out a function
will be shown on the display.
Loading...