Bluetooth
®
SPEAKER TOWER SSTB 10 A1
Bluetooth
Operating instructions
®
SPEAKER TOWER
IAN 271738
Bluetooth
Bedienungsanleitung
®
-SOUNDTOWER
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of
the device.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen
Funktionen des Gerätes vertraut.
GB / IE Operating instructions Page 1
DE / AT / CH Bedienungsanleitung Seite 19
A
B C
Contents
Introduction ...............2
Information concerning these
operating instructions .............2
Copyright ......................2
Limitation of liability ..............2
Notes on trademarks .............2
Warnings used ..................3
Intended use ...................3
Safety. . . . . . . . . . . . . . . . . . . . 4
Risk of electrocution ..............4
Basic safety guidelines ............4
Notes on the radio interface .......6
Handling batteries ...............6
Initial operation ...........7
Unpacking .....................7
Check the package contents .......7
Disposal of packaging materials . . . .7
Set-up location requirements .......8
Electrical connection .............8
Inserting/changing the remote
control batteries .................8
Connecting a playback device
Connecting a playback device
using a 3.5mm jack cable .......11
Connecting a playback device
using a cinch cable .............12
Pairing the device with a
Bluetooth
Troubleshooting ..........13
Cleaning .................14
Storage/disposal .........14
Storage when not in use .........14
Disposal of the device ...........14
Disposal of batteries ............15
Appendix ................15
Technical data .................15
Warranty .....................17
Service .......................17
Importer ......................17
EU conformity declaration ........18
®
playback device ....12
11
GB
IE
Operating components ...... 9
Handling and operation ....10
Operation using the buttons on the
device .......................10
Operation using the buttons on the
remote control .................10
Switch the device on/off .........11
SSTB 10 A1
1
GB
IE
Introduction
Information concerning these operating instructions
Congratulations on the purchase of your new device.
You have selected a high-quality product. The operating instructions are part of
this product. They contain important information on safety, usage and disposal.
Before using the product, familiarise yourself with all handling and safety guidelines. Use the product only as described and for the range of applications specified. Keep these operating instructions as a reference and store them near the
product. Please also pass these operating instructions on to any future owner(s).
Copyright
This documentation is protected by copyright.
Any copying or reproduction, including in the form of extracts, or any repro-
duction of images (even in a modified state), is permitted only with the written
authorisation of the manufacturer.
Limitation of liability
All the technical information, data and instructions regarding installation, connection and operation contained in these operating instructions correspond to the
latest information available to us at the time of printing and take into account
our previous experience and know-how.
No claims can be derived from the details, illustrations and descriptions in these
instructions.
The manufacturer assumes no responsibility for damage caused by failure to
observe these instructions, improper use, incompetent repairs, unauthorised
modifications or for the use of non-approved replacement parts.
Notes on trademarks
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc.
All other names and products may be trademarks or registered trademarks of
their respective owners.
2
SSTB 10 A1
Warnings used
The following warnings are used in these operating instructions:
DANGER
A warning at this hazard level indicates a potentially hazardous
situation.
Failure to avoid this hazardous situation could result in severe injuries or
even death.
► Follow the instructions in this warning to prevent a fatality or serious
personal injury.
CAUTION
A warning at this hazard level indicates potential property
damage.
Failure to avoid this situation could result in property damage.
► Follow the instructions in this warning to prevent property damage.
NOTE
► A note provides additional information that will assist you in using the device.
Intended use
This is a consumer electronics device and is exclusively for the playback of audio
files via Bluetooth®, cinch cable and 3.5 mm jack cable.
The device is intended for private use only and is not suitable for commercial
purposes. It is not intended for any other use or use beyond that specified.
Claims of any kind for damage arising as a result of incorrect use will not be
accepted. The risk shall be borne solely by the user.
GB
IE
SSTB 10 A1
3
GB
IE
Safety
In this section, you will find important safety instructions for using the device.
The device complies with the statutory safety regulations. Improper use may
result in personal injury and property damage.
Risk of electrocution
DANGER
Risk of fatal injury from electrocution!
Contact with live cables or components can result in fatal injury!
Please observe the following safety guidelines to prevent electrical hazards:
► Do not use the device if the mains power adapter or the connection cable
are damaged.
► The mains adapter and the welded connection cable may not be repaired.
In the event of a defect, the entire mains adapter must be replaced with
another of identical design.
► The device housing must not be opened under any circumstances. There is
a risk of electrocution if live connections are touched and the electrical and
mechanical structure is changed.
Basic safety guidelines
To ensure safe operation of the device, follow the safety guidelines set out below:
■ Prior to use, check the device for visible external damage. Do not operate
a device that has been damaged or dropped.
■ If the cables or connections are damaged, have them replaced by an authorised
specialist or the Customer Service department.
■ This appliance may be used by children aged 8 over and by persons with
reduced physical, sensory or mental capabilities or lack of experience and
knowledge, provided that they are under supervision or have been told how
to use of the appliance safely and are aware of the potential risks. Children
must not play with the appliance. Cleaning and user maintenance tasks must
not be carried out by children unless they are supervised.
■
DANGER! Do not allow children to play with the packaging material!
Keep all packaging materials out of the reach of children.
Risk of suffocation!
4
SSTB 10 A1
■ All repairs must be carried out by authorised specialist companies or by the
Customer Service department. Failure to make proper repairs can put the
user at risk. It will also invalidate any warranty claim.
■ Repairs to the device during the warranty period may only be carried out by
a customer service department authorised by the manufacturer. Otherwise
no warranty claims can be considered for subsequent damage.
■ Defective components must always be replaced with original replacement
parts. Compliance with safety requirements can only be guaranteed if original
replacement parts are used.
■ Use the device and the mains adapter only in dry rooms.
■ Protect the device from drips or splashes of water. Never submerge the
device in water, do not set up the device in the vicinity of water and do not
place any object filled with liquid (i.e. vases) on or next to the device.
■ Do not place any heavy objects on the device. The storage compartment is
used only for storage of connected playback devices.
■ Do not operate or place the device close to an open flame (e.g. candles).
Do not place any lit candles on the product.
■ Avoid exposing the device to direct sunlight.
■ If you move the device quickly from a warm to a cold room or vice versa,
allow the device at least 30minutes to acclimatise.
■ Operate the device only with the supplied mains adapter.
■ To avoid damage caused by improper warming, do not cover the mains
power adapter.
■ The
■ To disconnect the mains adapter, always pull only on the plug itself, not on
■ Never touch the mains adapter or the connecting cable with wet hands!
■ The mains power socket must be easily accessible so that the mains adapter
■ In the case of a malfunction, unusual noises or smoke or a thunderstorm,
button on this device does not completely disconnect the device from
the mains power supply. In addition, the mains adapter consumes power as
long as it is connected to the power socket (standby mode). To completely
disconnect the device from the power supply, the plug must be removed
from the mains power socket.
the power cable.
can be easily disconnected in an emergency.
disconnect the mains adapter from the power socket.
GB
IE
SSTB 10 A1
5
GB
IE
Notes on the radio interface
■ Keep the device at least 20 cm away from a pacemaker, as the proper
functioning of the pacemaker could be affected by radio waves.
■ The transmitted radio waves can cause noise interference in hearing aids.
■ Do not use the device with the radio components switched on in the presence of
flammable gases or in a potentially explosive atmosphere (e.g. in a paint shop),
as the transmitted radio waves can cause an explosion or ignite a fire.
■ The range of the radio waves is dependent on the environment and the ambi-
ent conditions.
■ Data transmissions via a wireless connection can be intercepted by unauthor-
ised third parties.
Handling batteries
DANGER
Danger from improper use!
Mishandling lithium batteries can cause fires, explosions,
leakages of dangerous chemicals or other hazards!
In order to handle batteries safely, please observe the following safety instructions:
► Do not throw the batteries into a fire and do not subject them to high
temperatures.
► Do not open, deform or short-circuit batteries, since this can lead to chemical
leakage.
► Do not attempt to recharge batteries.
► Check the condition of the batteries at regular intervals. Leaking chemicals
can cause permanent damage to the device. Take particular care when
handling damaged or leaking batteries. Risk of chemical burns! Wear
protective gloves.
► Chemicals which leak from a battery can cause skin irritation. In the event
of contact with the skin, rinse with copious amounts of water. If the chemi-
cals come into contact with your eyes, rinse thoroughly with water, do not
rub and consult a doctor immediately.
► Keep batteries out of the reach of children. Children might put batteries into
their mouth and swallow them. If a battery has been swallowed, seek medical
assistance IMMEDIATELY.
► Always insert the batteries the right way round (observe correct polarity)
otherwise there is a danger that they could explode.
► Remove the batteries from the remote control if you do not intend to use the
device for extended periods of time.
6
SSTB 10 A1
Initial operation
Unpacking
♦ Remove all parts of the device and the operating instructions from the box.
♦ Remove all packaging material.
Check the package contents
(For illustrations see the fold-out page)
The following components are included in delivery:
● Bluetooth
● Mains adapter QXS24C-120200B
● Remote control
● Button cell CR2025 (already inserted in the remote control)
● These operating instructions
NOTE
► Check the package for completeness and for signs of visible damage.
► On delivery, the mains adapter and the remote control can be found in the
rigid foam packing directly under the lid of the box. Pull the rigid foam out
of the lid of the box to remove the mains adapter and the remote control.
► If the consignment is incomplete or damaged due to defective packaging
or carriage, contact the Service hotline (see the chapter Service).
®
Speaker Tower SSTB 10 A1
GB
IE
Disposal of packaging materials
The packaging protects the device from damage during shipment. The packaging
materials have been selected for their environmental friendliness and ease of
disposal, and are therefore recyclable.
Returning the packaging to the materials cycle conserves raw materials and
reduces the amount of waste that is generated. Dispose of packaging materials
which are no longer needed in accordance with applicable local regulations.
NOTE
► If possible, keep the original packaging of the device during the warranty
period so that the device can be packed properly for returning in the event
of a warranty claim.
SSTB 10 A1
7
GB
IE
Set-up location requirements
For safe and trouble-free operation of the device , the set-up location must fulfil
the following requirements:
■ Place the device on a firm, flat and level surface.
■ Do not operate the device in a hot, wet or extremely damp environment.
■ Keep a minimum distance of 30 cm to heat-emitting devices such as heaters,
ovens, etc.
■ Only operate the device in locations with adequate ventilation.
Electrical connection
■ Before you connect the device, compare the connection data (voltage and
frequency) on the mains adapter type plate with that of the intended power
source. These data must agree so that no damage is sustained by the device.
■ Make sure that the mains adapter's connection cable is not damaged and is
not laying over hot surfaces and/or sharp edges.
■ Connect the plug of the connecting cable into the connector for the power
supply on the rear of the unit and plug the mains adapter into a power
outlet. Ensure that the power cable is not stretched tightly or kinked.
■ Place the connecting cable such that no one can stumble over it.
■ Do not place the device, furniture or any other objects on the cable. Do not
kink the cable or knot it and do not connect it to other cables. Never wrap
the cable tightly around other objects otherwise the conductors inside the
cable could break and cause a malfunction.
Inserting/changing the remote control batteries
NOTE
► The supplied battery (Type CR2025) is already installed in the remote control
when delivered. Before use remove the isolation strip from the battery
compartment.
For replacement with a new battery proceed as follows:
♦ Pull the battery compartment out of the remote control by pressing the lateral
locking device and at the same time pull the battery compartment out.
♦ Remove the depleted battery and insert a new battery of the type CR2025
(button cell) into the battery compartment. Be sure to insert the battery with
the correct polarity.
♦ Slide the battery compartment back into the remote control until it locks into
place.
8
SSTB 10 A1
Operating components
(For illustrations see the fold-out page)
Figure A:
Display
Storage tray
Infrared sensor
FUNCTION button
button
button
button
button
/ button
DC IN connection socket
AUX 1 connection socket (3.5 mm jack)
AUX 2 connection socket (audio input jack R/L)
Figure B:
button
MUTE button
button
button
button
VOLUME + button
VOLUME - button
button
AUX button
GB
IE
Figure C:
SSTB 10 A1
Mains adapter
Operating instructions
9
GB
IE
Handling and operation
This section provides you with important information on handling and using the
device.
NOTE
► Most of the device’s functions can be operated by the buttons on the
device as well as by the buttons on the remote control.
Operation using the buttons on the device
Button Function
– Press and hold to switch the device on/off and to
/
FUNCTION
Operation using the buttons on the remote control
Button Function
activate/deactivate the Bluetooth® function.
– Press once to start/stop playback.
– Press to switch between the operating modes
(AUX and Bluetooth®).
– Press to jump to the next track.
– Press to jump to the previous track.
– Press to increase the volume.
– Press to decrease the volume.
– Press to switch the device on/off and to activate/
deactivate the Bluetooth
– Press to start/stop playback.
®
function.
10
VOLUME +
VOLUME -
MUTE
AUX
– Press to jump to the next track.
– Press to jump to the previous track.
– Press to increase the volume.
– Press to decrease the volume.
– Press to mute playback.
– Press to activate the AUX mode.
– Press to switch on the Bluetooth® function.
SSTB 10 A1
Loading...