Siemens GIGASET 4010 User Manual
Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03
SIEMENS
HWCD8518(3)P/TSDL
Be inspired
Siemens W10
Expandable cordless phone system
User Manual
1
Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03
Table of contents
Preparing to use your phone................................................................................... 4
The pack contains ................................................................................................... 4
Installing the phone ................................................................................................ 4
Descriptions of displays of the handset and the base ............................................. 5
Descriptions of the function keys and the indicators.............................................. 6
Description of the function keys on the handset ............................................. 6
Description of the function keys and the indicators on the base ..................... 6
Settings ...................................................................................................................... 8
“Tone/Pulse” switch ............................................................................................... 8
“Flash timing” switch............................................................................................. 8
Setting the date and the time .................................................................................. 8
Setting area code (handset and base)...................................................................... 8
Adding IDD code to the incoming calls (handset and base) .................................. 9
Adding external mark to the incoming calls (handset and base)............................ 9
Adjusting the LCD light (handset and base) .......................................................... 9
Selecting Ringer Tones (handset and base) ............................................................ 9
Selecting VIP Ringer Tones (handset and base)................................................... 10
Selecting Caller Ringer Tones (handset and base) ............................................... 10
Registering the Handset (INT) ............................................................................. 10
Activating/Deactivating ringer ............................................................................. 10
Activating ring..................................................................................................... 12
Adjusting Volume ................................................................................................. 11
Basic operation ....................................................................................................... 12
Answer/Hang-Up.................................................................................................. 12
Making Calls ........................................................................................................ 12
Outgoing call ........................................................................................................ 12
Deleting a single outgoing number....................................................................... 13
Deleting all outgoing numbers ............................................................................. 13
External call and power indicators ....................................................................... 13
Call ending function ............................................................................................. 13
Changing channels................................................................................................ 13
Temporary tone dialing......................................................................................... 13
Base holding ......................................................................................................... 14
Intercom mode...................................................................................................... 14
Searching for handset/base and intercom ............................................................ 14
Transferring a call................................................................................................. 14
Transferring a call from the base to the handset............................................ 14
Transferring a call from the handset to the base............................................ 15
Transferring a call from one handset to another............................................ 15
Displaying incoming numbers…………………………………………………15
Incoming call records .................................................................................... 15
2
Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03
Browsing incoming call records.................................................................... 16
Storing the incoming call numbers to the directory (base and handset)........ 17
Deleting individual incoming call numbers .................................................. 17
Deleting all incoming numbers ..................................................................... 17
Browsing and dial the incoming numbers..................................................... 17
Directory.............................................................................................................. 17
Storing phone numbers.................................................................................. 18
Browsing lists in the Directory...................................................................... 18
Inserting Pause time to a number .................................................................. 18
Adding dialing pause……………………………………………………………………
18
Modifying stored phone numbers.................................................................. 18
Storing outgoing phone numbers................................................................... 18
Setting up VIP calls ....................................................................................... 18
Dialing from stored caller-ID ........................................................................ 19
Deleting an individual number in the Directory............................................ 19
Deleting all numbers in the Directory ........................................................... 19
Speed dial ...................................................................................................... 20
Storing IP numbers ........................................................................................ 20
IP dialing and dial back ................................................................................. 21
PIN lock ............................................................................................................... 21
Setting PIN and Lock Code........................................................................... 21
Setting to lock the numbers beginning with “0” ..............................................
(please set on the handset and base)............................................................. 22
Unlocking ...................................................................................................... 22
Mechanical lock............................................................................................. 22
Ringing back.................................................................................................. 22
Battery indication ................................................................................................. 22
Replacing batteries ...............................................................................................23
Safe use of the batteries........................................................................................ 23
Care........................................................................................................................ 23
Indicating information.......................................................................................... 23
Q&A ..................................................................................................................... 24
Hotline………………………………………………………………………………………..25
Appendix (Interface Illustration)
3
Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03
Preparing to use the phone
The pack contains:
z Base
z Handset
z Microphone.
z Microphone cord (coiled)
z Rechargeable batteries
z Charger
z Phone cord
z Two power supply units with power cord
z One set of operating instruction
Installing the phone
1. To open the battery compartment, press the battery cover of the handset and slide it down.
2. Insert the battery plug into the socket in the battery compartment and place the batteries
into the battery compartment
3. Push up the battery cover
4. Place the handset with batteries into the charger
5. Insert small jack of the power supply unit into the socket on the back of the charger, and
then plug the other end into the 220V power outlet.
6. Raise the antenna
7. Insert the jack on the power supply unit into the socket on the back of the base, and then
plug the power supply unit into your power outlet. When the LED on the base lights up,
the base is powered.
Note: For the initial charge we recommend a continuous, uninterrupted charging period of
more than twelve hours before use.
8. Fit the small jack on the phone cord into the socket in the base and fit the other end into
phone outlet.
9. If “Ringer Off” is shown on the display, please set the ringer tone to “ON” according tothe
descriptions in the “Ring switch” section.
4
Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03
Note: The dial mode of this phone has been set to tone
dialing. If you want to change it to pulse dialing, please refer to
the descriptions in the “Tone/Pulse Switch” section. If you are
not sure which mode to apply, please consult your phone
service company.
10.Place your base away from the “interference sources” (e.g.:
TV, PC, microwave oven, refrigerator, etc.) and in a central
position of its range, and if you can place it at a higher position,
it will work better. To obtain the best performance, pull the
antenna to its maximum length.
11.Adjust the flash time to a required period of time.
Note: Use the power adapter in the package. Using other
power adapters might cause damages to your phone.
Note: The dial mode of this phone has been set to be tone
dialing.
Descriptions of displays of the handset and
base
Line
Number of callers
Channel switch (handset)
VIP records
Batt. fully charged (handset)
Batteries flat (handset)
New incoming call records
Outgoing call records
Directory
Repeat call records
The ringer is programmed off
(Hour: minute˅
(Date-month) (handset)
Date (base)
Pin lock (base)
Base in use, handset is in standby (handset)
5
Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03
Descriptions of the function keys and the
indicators
Description of the function keys on the handset
- IP numbers storage or dialing
- To Enter Directory/Set program
- To Confirm the selected options in Setting mode
- To Exit the program
- Internal calls between handset and base
- Channel/Select(directory/incoming records/outgoing call
records)
End/delete/handset registration
-To Redial
- To Insert dialing pause when dialing or storing phone numbers
Talk/End
- Incoming call: enter caller records
- Outgoing call: enter dial-out records
- To adjust volume when talking
- To scroll up/down and select
Display the rest phone numbers
Description of the function keys and the indicators on the
base
In use
Power on
Hands-Free talk/hang-up
IP numbers storage or dialing
- Enter directory/Set program
- Confirm the selected options in Setting mode
Delete/handset registration
Select (directory/incoming call records/outgoing call records)
- To page handset
- Enter intercom mode
- Exit options or Set mode
- Adjust hands-free voice volume
6
Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03
Talk holding
- Incoming call: enter caller records mode
- Outgoing call: enter dial-our records mode
- To scroll up/down and select
- Redial/Dialing Pause
- To insert dialing pause when storing numbers
End call
Display the rest phone numbers
7
Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03
Settings
“Tone/pulse” switch
On the rare of the base is a “Tone/Pulse” switch for tone or pulse
mode selection.
“Flash timing” switch
On the rare of the base is a “Flash time” switch with three flash
time selections, 90ms, 270ms and 600ms. (For use in China, set
it to be 600ms)
Note: the flash time is effective only by setting it before
connected to power and phone cord.
Setting the date and the time
Press the Volume/Time key for 3 seconds
Press Ʒ or to adjust the Month
Press Volume/Time key to set Date
Press Ʒ or to adjust the Date
Press Volume/Time key to set the Hour
Press Ʒ or to adjust the Hour
Press Volume/Time key to set the Minute
Press Ʒ or to adjust the Minute (or press the Exit key to
exit the setting)
Press Volume/Time key for confirmation and exit
Setting area code (handset and base)
Press and hold the Mem/Prog key for 3 seconds
Enter four digits of area code. If wrong digits are entered, press
Flash/Clear key to modify.
Press Mem/Prog key for confirmation
Press Exit key to exit
8
Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03
Adding IDD code to the incoming calls
(handset and base)
Press the Mem/Prog key for 3 seconds
Press Channel/Select key till “Lo CodE” appears
Enter one digit of IDD code, which can be deleted by pressing
the Flash/Clear key.
Press Mem/Prog key for confirmation
Press Exit to exit
Adding external mark to the incoming calls
(handset and base)
Press the Mem/Prog key for 3 seconds
Press the Channel/Select key until “Add” appears
Enter one digit of “9”. (For example, you need to enter “9” for
placing outgoing calls. When placing an outgoing call, you must
enter “9” before dialing out.)
Press the Mem/Prog key for confirmation
Press Exit to exit
Adjust the LCD light (handset and base)
Press the Mem/Prog key for 3 seconds
Press the Channel/Select key till “LCD” appears
Press Ʒ or to adjust the light
Press the Mem/Prog key for confirmation
Press Exit to exit
Selecting Ringer Tones (handset and base)
Press the Mem/Prog key for 3 seconds
Press the Channel/Select key until “Ring” appears
Press Ʒ or to select the ringer melody. (8 melodies)
Press the Mem/Prog key for confirmation
Press Exit to exit
9
Loading...