Sherwood PM-9805 Owners Manual

PM-9805

TURN TABLE

OPERATING INSTRUCTIONS

TURN TABLE

PRECAUTIONS

1

Thank you for purchasing this fine product – STEREO TURNTABLE.
Taking time to read these operation instructions carefully.

Read this manual carefully before using the unit and be sure to store the manual in a safe place for future reference.

1. Power sources

This product should be operated only from the type of
power source indicated on the marking label. If you
are not sure of the type of power supply to your
home, consult your product dealer or local Power
Company.

2. Do not block the ventilation holes

Do not block the ventilation holes. If objects are
placed on top of this model, the heat generated
inside will not be able to dissipate. This will cause the
internal temperature to rise and will adversely affect
the performance of the various parts. Remember that
a great deal of heat is generated when the model is
used for long periods of time at high power out put
levels.

3. Installation precautions

Do not install the unit in any of the following locations
since this may result in a deterioration in performance
or malfunction:

• Locations exposed to direct sunlight or near
object radiating heat such as heating appliances.

• Locations exposed to moisture or humidity.

• Cartridge may pick up slight sound pressure or
vibrations of the speakers coming along the floow
or though the air resulting in feedback or howling
sound. Find a location which is very stable and
vibration free.

• The legs have functions for adjusting the height
of the unit itself. Adjust the legs to stabilize the
main body horizontally..

4. The model may not be able to perform at its best in
an extremely cold envirnment. The optimum ambient
temperature range is 0

o

C to 35oC.

1. Always clean the stylus both before and after
playing a record with a soft brush, and try to make
it a rule to clean the record with a soft brush and
try to make it a rule to clean the records with a
good quality cleaner.

2. Be careful not to make the turntable vibrate while
a record is playing, since this can result in
damage to the stylus and record.

3. When clanging over the headshell, clamp the
tonearm to the arm rest so that the tonearm shaft
is not strained in any way.

4. Place only one record at a time on the platter. If
two or more records are sacked on the platter, the
stylus will not make proper contact with the
grooves, and this will impair the quality of
reproduction.

5. Volatile materials should not be used, such as :
alcohol, thinner, benzone etc. They may remove
the painter or damage the lustre, please avoid.

OPERATION PRECAUTIONS

NAME OF THE PARTS

2

1. 45-rpm Adaptor

2. Slip Mat

3. Center Spindle

4. Strobe Dots

5. Power Switch / Strobe

6. Start/Stop Button

7. Taget Light

8. Headshell

9. Speed Select Buttons

10. Pitch Control Slider (+/– 10%)

11. Tonearm

12. Cueing Lever

13. Arm Rest

14. Anti-skate Knob

15. Stylus-Pressure Ring

16. Counterweight

17. Position for Preparing Cartridge

18. Hinge for Dust Cover