Sharp UX-60S, UX-40S User Manual

all-ux40.book Page 87 Thursday, November 18, 1999 2:35 PM

9. Maintenance

Cleaning the scanning glass and rollers

Clean the scanning glass and rollers frequently to ensure the quality of
your transmitted images and copies.

1

Grasp the finger hold and pull up to
open the operation panel.

9. Maintenance

2

Flip up the green levers on each side
of the white roller.

3

Wipe the scanning glass and rollers
with a cotton pad.

•

Make sure that all dirt and stains
(such as correcting fluid) are
removed, as dirt will cause vertical
lines on transmitted images and
copies.

Scanning
glass

87

all-ux40.book Page 88 Thursday, November 18, 1999 2:35 PM

4

Flip down the green levers on each
side of the white roller.

5

Flip up the front paper guide and wipe
the black roller under it.

6

Flip down the front paper guide.

7

Close the operation panel.

•

Press down on both front corners of
the panel to make sure it clicks into
place.

Cleaning the housing

Wipe the external parts and surface of the machine with a dry cloth.

Caution!

Do not use benzene or thinner. These solvents may damage or
discolour the machine.

88