SEW Eurodrive MOVITRAC LTE-B User Manual

Uninterruptible Power Systems

SDU Series

500, 850, 500-5, 850-5

Instruction Manual

Clearwater Tech - Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [e-mail]

While every precaution has been taken to ensure accuracy and completeness in this

Clearwater Tech - Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [e-mail]

manual, SolaHD assumes no responsibility, and disclaims all liability for damages resulting
from use of this information or for any errors or omissions.

©2008 SolaHD. All rights reserved throughout the world. Specications are subject to

change without notice.
®SolaHD name and logo are registered trademarks of EGS Electrical Group, LLC. All

names referred to are trademarks or registered trademarks of their respective owners.
Aunque se han tomado todas las precauciones para asegurar la exactitud y acuciosidad de

este manual, SolaHD no asume responsabilidad alguna, y rechaza toda responsabilidad
por daños que pudieran resultar debido al uso de esta información o por cualquier error u
omisión.

©2008 SolaHD. Todos los derechos reservados en el mundo entero. Las especicaciones

pueden cambiar sin previo aviso.
El nombre y el logotipo de ®SolaHD son marcas registradas de EGS Electrical Group, LLC.

Todos los nombre mencionados son marcas comerciales o registradas de sus respectivos
titulares.

Bien que toutes les précautions aient été prises an d’assurer que les renseignements du
présent manuel sont complets et exacts, Sola/Hevi-Duty n’assume aucune responsabilité,
et décline toute responsabilité pour des dommages découlant de l’utilisation de cette

information ou de toute erreur ou omission.
©2008 SolaHD Tous droits réservés mondialement. Les caractéristiques techniques sont

sujettes à modication sans préavis.

Le nom et le logo ®SolaHD sont des marques déposées de EGS Electrical Group, LLC.
Tous les noms évoqués sont des marques de commerce ou des marques déposées de
leurs propriétaires respectifs.

SDU Series Instruction Manual • ii

1.0 Important Safety Instructions

This manual contains important safety instructions that should be followed during

Clearwater Tech - Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [e-mail]

the installation of the Uninterruptible Power System (UPS). Please read all safety,
installation, and operating instructions before attempting to install or operate the
UPS. Please adhere to all warnings on the unit and in this manual during installa­tion and operation.

The UPS is designed for Industrial or Commercial use and can be installed and
operated by individuals without previous training.

1.1 Safety Precautions—Warnings

• To prevent the risk of re or electric shock, install the UPS in a temperature

and humidity controlled ventilated enclosure, free of conductive contaminants,

moisture, flammable liquids, gases, and corrosive substances.

• Operate the UPS only from a properly grounded (earthed) ac supply.

• To reduce the risk of electric shock, do not remove the cover, as it has no user-

serviceable parts inside. Some components are live, even when ac power is

disconnected. For service, contact a qualied technician.

Although your UPS has been designed and manufactured to assure personal

safety, improper use can result in electrical shock or re. To ensure safety, please

observe the following rules:

• Turn OFF UPS and disconnect the ac supply before cleaning. Do not use

liquid or aerosol cleaners. A dry cloth is recommended to remove dust from the
surface of your UPS.

• Do not install or operate the UPS in or near water.

• Do not place the UPS on an unstable cart, stand, or table.

• Do not place the UPS under direct sunlight or close to heat-emitting sources.

• To allow proper ventilation of the UPS, do not block or cover the top and bottom

sides of the unit.

• Never block or insert any objects into the ventilation holes or other openings of
the UPS. Keep all vents free of dust accumulation that could restrict airflow.

• Follow all warnings and instructions marked on the UPS. Do not attempt to

2.0 Warnings Dened

Clearwater Tech - Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [e-mail]

service the UPS, as it has no user-serviceable parts inside. Refer all repairs to

qualied service personnel.

• Do not dispose of batteries in a re; they may explode.

• Do not open or damage the battery. Released electrolyte is harmful to the skin

and eyes and may be toxic.

If your UPS demonstrates any of the following conditions, turn OFF the UPS,
disconnect the ac supply and contact your local distributor, SolaHD representa­tive or SolaHD Technical Support at 1-800-377-4384.

• Liquid has been spilled on the UPS.

• The circuit breaker opens frequently.

• The UPS does not operate in accordance with the user manual.

1.2 Conditions of Use

Your UPS provides conditioned power to connected equipment. The maximum
load must not exceed that shown on UPS rating label. If uncertain, contact your
distributor or SolaHD Technical Support at 1-800-377-4384.

U.S. Only: For Conditions of Acceptability in accordance with UL 508A, see “13.0
Conditions for Safe Use of SDU 500 & 850”.

Danger: Indicates an imminently hazardous situation

that, if not avoided, will result in death or serious injury.

This signal word is limited to the most extreme situations.

Warning: Indicates a potentially hazardous situation that,

if not avoided, could result in death or serious injury.

Caution: Indicates a potentially hazardous situation that,

if not avoided, may result in minor or moderate injury. It

may also be used to alert against unsafe practices.

3.0 Introduction

Congratulations on your choice of the SDU Uninterruptible Power System (UPS).

Clearwater Tech - Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [e-mail]

The SDU is a compact, “Off-Line” DIN rail mountable UPS, which provides condi­tioned power to sensitive electronic equipment. It supplies connected equipment
with stepped approximation to sinewave power to simulate the power generated
by the utility.

The SDU is a powerful, microprocessor-controlled UPS. Input voltage range is
80% to 110% (ideal protection for the critical connected loads). Battery charging
occurs automatically when ac power is applied, no need to switch ON the UPS.
When power fails, the UPS can be automatically turned OFF, as long as the
connected loads are not operating to save the battery energy. The SDU also
includes an automatic self-test feature to test the UPS function and battery. If the
battery is no longer useful, the unit will sound an alarm and an LED indicator will
illuminate.

NOTE: This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in an
industrial installation. This equipment uses, generates and can radiate radio
frequency energy and, if not installed and used in accordance with the instruc­tions, may cause harmful interference with radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment OFF and ON, the user is encour­aged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the UPS and the receiver.

• Connect the UPS into a circuit different from that which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.