SATA Product Manual
Standard model
ST8000VX0022
ST6000VX0023
ST4000VX007
ST3000VX010
ST2000VX008
ST1000VX005
100804836, Rev. B
October 2016
Document Revision History
Revision |
Date |
Pages affected and Description of Change |
||
|
|
|
||
Rev. A |
10/12/2016 |
Initial release. |
||
|
|
|
|
|
|
|
9: |
Table 1 Op Shock value |
|
Rev. B |
10/17/2016 |
23: |
Changed Figure 3 to 8TB only |
|
24-26: New mechanical drawings for 6TB, 4TB & 3-2TB |
||||
|
|
|||
|
|
32: Word 98-99 Streaming Performance Granularity = 2710H / 0000H |
© 2016, Seagate Technology LLC All rights reserved.
Publication number: 100804836, Rev. B October 2016
Seagate, Seagate Technology and the Spiral logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. SeaTools is either trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. All other trademarks or registered trademarks are the property of their respective owners.
No part of this publication may be reproduced in any form without written permission of Seagate Technology LLC. Call 877-PUB-TEK1 (877-782-8351) to request permission.
When referring to drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion bytes. Your computer’s operating system may use a different standard of measurement and report a lower capacity. In addition, some of the listed capacity is used for formatting and other functions, and thus will not be available for data storage. Actual quantities will vary based on various factors, including file size, file format, features and application software. Actual data rates may vary depending on operating environment and other factors. The export or re-export of hardware or software containing encryption may be regulated by the U.S. Department of Commerce, Bureau of Industry and Security (for more information, visit www.bis.doc.gov), and controlled for import and use outside of the U.S. Seagate reserves the right to change, without notice, product offerings or specifications.
Contents
Seagate® Technology Support Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1.1 About the SATA interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.0 Drive Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.1 |
Specification summary tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
. 8 |
|
2.2 |
Formatted capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
11 |
|
|
2.2.1 |
LBA mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
11 |
2.3 |
Default logical geometry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
12 |
|
2.4 |
Seek time |
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
12 |
2.5 |
Start/stop times . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
12 |
|
2.6 |
Power specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
13 |
|
|
2.6.1 |
Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
13 |
|
2.6.2 |
Typical current profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
14 |
|
2.6.3 |
Conducted noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
15 |
|
2.6.4 |
Voltage tolerance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
15 |
|
2.6.5 |
Power-management modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
15 |
2.7 |
Environmental specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
16 |
|
|
2.7.1 |
Drive case temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
16 |
|
2.7.2 |
Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
16 |
|
2.7.3 |
Temperature gradient . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
16 |
|
2.7.4 |
Humidity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
16 |
|
2.7.5 |
Altitude . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
16 |
|
2.7.6 |
Shock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
17 |
|
2.7.7 |
Vibration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
17 |
2.8 |
Acoustics. |
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
18 |
|
2.8.1 |
Test for Prominent Discrete Tones (PDTs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
18 |
2.9 |
Electromagnetic immunity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
18 |
|
2.10 |
Reliability - Mean Time Between Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
19 |
|
|
2.10.1 |
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
19 |
2.11 |
Warranty . |
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
19 |
2.12 |
Agency certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
19 |
|
|
2.12.1 |
Safety certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
19 |
|
2.12.2 |
Electromagnetic compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
19 |
|
2.12.3 |
FCC verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
20 |
2.13 |
Environmental protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
20 |
|
|
2.13.1 |
European Union Restriction of Hazardous Substances (RoHS) Directive. . . . . . . . . . . . . . |
20 |
|
2.13.2 |
China Requirements — China RoHS 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
21 |
2.14 |
Corrosive environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
21 |
Seagate SkyHawk Product Manual, Rev. B |
2 |
Contents
3.0 Configuring and Mounting the Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
3.1 Handling and static-discharge precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 3.2 Configuring the drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 3.3 SATA cables and connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 3.4 Drive mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
4.0 SATA Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
4.1 Hot-Plug compatibility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 4.2 SATA device plug connector pin definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 4.3 Supported ATA commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 4.3.1 Identify Device command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 4.3.2 Set Features command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 4.3.3 S.M.A.R.T. commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Seagate SkyHawk Product Manual, Rev. B |
3 |
Figures
Figure 1 |
Typical Current Profile for 2TB to 8TB models (5V & 12V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
14 |
Figure 2 |
Attaching SATA cabling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
22 |
Figure 3 |
Mounting dimensions (8TB). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
23 |
Figure 4 |
Mounting dimensions (6TB). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
24 |
Figure 5 |
Mounting dimensions (4TB). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
25 |
Figure 6 |
Mounting dimensions (3TB - 2TB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
26 |
Figure 7 |
Mounting dimensions (1TB). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
27 |
Seagate SkyHawk Product Manual, Rev. B |
4 |
For information regarding online support and services, visit: http://www.seagate.com/contacts/
For information regarding Warranty Support, visit: http://www.seagate.com/support/warranty-and-replacements/
For information regarding data recovery services, visit: http://www.seagate.com/services-software/data-recovery-services/ For Seagate OEM, Distribution partner and reseller portals, visit: http://www.seagate.com/partners/
Seagate SkyHawk Product Manual, Rev. B |
5 |
This manual describes the functional, mechanical and interface specifications for the following: Seagate® SkyHawkTM model drives:
ST8000VX0022 |
ST6000VX0023 |
ST4000VX007 |
ST3000VX010 |
ST2000VX008 |
ST1000VX005 |
These drives provide the following key features:
•24x7 capability
•Balance technology to support multiple drives in a system
•Compliant with RoHS requirements in China and Europe
•Full-track multiple-sector transfer capability without local processor intervention
•Low activity and idle power
•Low-RPM spindle speed
•Native Command Queuing with command ordering to increase performance in demanding applications
•Off-the-shelf compatibility
•Performance-tuned for RAID applications
•Rated for 1M hours MTBF
•SeaTools diagnostic software performs a drive self-test that eliminates unnecessary drive returns.
•State-of-the-art cache and on-the-fly error-correction algorithms
•Streaming video optimization - consistent command completion times & ERC support
•Support for S.M.A.R.T. drive monitoring and reporting
•Supports ATA8 streaming commands
•Supports latching SATA cables and connectors
•TGMR recording technology provides the drives with increased areal density.
•Worldwide Name (WWN) capability uniquely identifies the drive
Seagate SkyHawk Product Manual, Rev. B |
6 |
www.seagate.com |
Introduction |
The Serial ATA (SATA) interface provides several advantages over the traditional (parallel) ATA interface. The primary advantages include:
•Easy installation and configuration with true plug-and-play connectivity. It is not necessary to set any jumpers or other configuration options.
•Thinner and more flexible cabling for improved enclosure airflow and ease of installation.
•Scalability to higher performance levels.
In addition, SATA makes the transition from parallel ATA easy by providing legacy software support. SATA was designed to allow users to install a SATA host adapter and SATA disk drive in the current system and expect all of the existing applications to work as normal.
The SATA interface connects each disk drive in a point-to-point configuration with the SATA host adapter. There is no master/slave relationship with SATA devices like there is with parallel ATA. If two drives are attached on one SATA host adapter, the host operating system views the two devices as if they were both “masters” on two separate ports. This essentially means both drives behave as if they are Device 0 (master) devices.
The SATA host adapter and drive share the function of emulating parallel ATA device behavior to provide backward compatibility with existing host systems and software. The Command and Control Block registers, PIO and DMA data transfers, resets, and interrupts are all emulated.
The SATA host adapter contains a set of registers that shadow the contents of the traditional device registers, referred to as the Shadow Register Block. All SATA devices behave like Device 0 devices. For additional information about how SATA emulates parallel ATA, refer to the “Serial ATA International Organization: Serial ATA Revision 3.2”. The specification can be downloaded from www.sata-io.org.
The host adapter may, optionally, emulate a master/slave environment to host software where two
devices on separate SATA ports are represented to host software as a Device 0 (master) and Device 1 Note (slave) accessed at the same set of host bus addresses. A host adapter that emulates a master/slave
environment manages two sets of shadow registers. This is not a typical SATA environment.
Seagate SkyHawk Product Manual, Rev. B |
7 |
Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the following drive models:
ST8000VX0022 |
ST6000VX0023 |
ST4000VX007 |
ST3000VX010 |
ST2000VX008 |
ST1000VX005 |
The specifications listed in Table 1 are for quick reference. For details on specification measurement or definition, refer to the appropriate section of this manual.
Table 1 Drive specifications summary for 8TB and 6TB models
Drive Specification* |
ST8000VX0022 |
|
ST6000VX0023 |
|
|
|
|
|
|
Formatted capacity (512 bytes/sector)** |
8000GB (8TB) |
|
6000GB (6TB) |
|
|
|
|
|
|
Guaranteed sectors |
15,628,053,168 |
|
11,721,045,168 |
|
|
|
|
|
|
Heads |
12 |
|
10 |
|
|
|
|
|
|
Disks |
6 |
|
5 |
|
|
|
|
|
|
Bytes per sector |
|
4096 |
||
(4K physical emulated at 512-byte sectors) |
|
|||
|
|
|
||
|
|
|
||
Default sectors per track |
|
63 |
||
|
|
|
||
Default read/write heads |
|
16 |
||
|
|
|
||
Default cylinders |
|
16,383 |
||
|
|
|
|
|
Recording density (max) |
2177KBPI |
|
1984KBPI |
|
|
|
|
|
|
Track density (avg) |
|
370KTPI |
||
|
|
|
|
|
Areal density (avg) |
802Gb/in2 |
|
732Gb/in2 |
|
Internal data transfer rate (max) |
|
1981Mb/s |
||
|
|
|
||
Maximum sustained data rate, OD read (MB/s) |
|
210MB/s |
||
|
|
|
||
|
|
PIO modes: 0 to 4 |
||
ATA data-transfer modes supported |
Multiword DMA modes: 0 to 2 |
|||
|
|
Ultra DMA modes 0 to 6 |
||
|
|
|
||
I/O data-transfer rate (max) |
|
600MB/s |
||
|
|
|
||
Cache buffer |
|
256MB |
||
|
|
|
||
Height (max) |
|
26.1mm / 1.028 in |
||
|
|
|
||
Width (max) |
|
101.6mm / 4.010 in |
||
|
|
|
||
Length (max) |
|
146.99mm / 5.787 in |
||
|
|
|
|
|
Weight (max) |
780g / 1.72 lb |
|
705g / 1.55 lb |
|
|
|
|
|
|
Average latency |
|
4.0ms |
||
|
|
|
||
Average seek, read (typical) |
|
<8.5ms |
||
Average seek, write (typical) |
|
<9.5ms |
||
|
|
|
||
Startup current (typical) 12V |
|
1.8A |
||
|
|
|
||
Voltage tolerance (including noise) |
|
5V: ±5% |
||
|
12V: ±10% |
|||
|
|
|||
|
|
|
||
Non-Operating (Ambient °C) |
|
-40 to 70 |
||
|
|
|
||
Operating ambient temperature (min °C) |
|
5 |
||
|
|
|
||
Operating temperature (drive case max °C) |
|
70† |
||
Temperature gradient |
20°C per hour max (operating) |
|||
30°C per hour max (nonoperating) |
||||
|
||||
|
|
|
||
Relative humidity |
|
5% to 90% (operating) |
||
5% to 95% (nonoperating) |
||||
|
||||
|
|
|
||
Relative humidity gradient (max) |
|
30% per hour |
||
|
|
|
|
Seagate SkyHawk Product Manual, Rev. B |
8 |
www.seagate.com |
|
|
Drive Specifications |
|
Table 1 Drive specifications summary for 8TB and 6TB models (continued) |
|
|||
Drive Specification* |
ST8000VX0022 |
|
ST6000VX0023 |
|
|
|
|
|
|
Wet bulb temperature (max) |
26°C max (operating) |
|
||
29°C max (nonoperating) |
||||
|
||||
|
|
|
||
Altitude, operating |
–304m to 3048m |
|
||
(–1000 ft to 10,000 ft) |
|
|||
|
|
|||
|
|
|
||
Altitude, non-operating |
–304m to12,192m |
|
||
(below mean sea level, max) |
(–1000ft to 40,000+ ft) |
|
||
|
|
|
||
Operational Shock (max) |
70 Gs at 2ms |
|
||
|
|
|
||
Non-Operational Shock (max) |
250 Gs at 2ms |
|
||
|
|
|||
|
2Hz to 22Hz: 0.25 Gs, Limited displacement |
|||
Vibration, operating |
22Hz to 350Hz: 0.50 Gs |
|
||
|
350Hz to 500Hz: 0.25 Gs |
|
||
|
|
|
||
|
5Hz to 22Hz: 3.0 Gs |
|
||
Vibration, non-operating |
22Hz to 350Hz: 3.0 Gs |
|
||
|
350Hz to 500Hz: 3.0 Gs |
|
||
|
|
|
|
|
Drive acoustics, sound power |
|
|
|
|
|
|
|
||
Idle*** |
2.7 bels (typical) |
|
||
2.8 bels (max) |
|
|||
|
|
|||
|
|
|
|
|
Seek |
2.8 bels (typical) |
|
||
2.9 bels (max) |
|
|||
|
|
|||
|
|
|
||
Non-recoverable read errors |
1 per 10 15 bits read |
|
||
Mean time between failures (MTBF), hours |
1M |
|
||
|
|
|
||
|
Average annualized workload rating: <180 TB/year. |
|
||
|
The AFR specification for the product assumes the I/O workload does not exceed |
|||
Rated Workload |
the average annualized workload rate limit of 180 TB/year. Workloads exceeding |
|||
the annualized rate may degrade the product AFR and impact reliability as |
||||
|
||||
|
experienced by the particular application. The average annualized workload rate |
|||
|
limit is in units of TB per calendar year. |
|
||
|
|
|||
|
To determine the warranty for a specific drive, use a web browser to access the |
|||
|
following web page: |
|
||
Warranty |
http://www.seagate.com/support/warranty-and-replacements/ |
|||
From this page, click on “Is my Drive under Warranty”. Users will be asked to |
||||
|
||||
|
provide the drive serial number, model number (or part number) and country of |
|||
|
purchase. The system will display the warranty information for the drive. |
|||
|
|
|
||
Load/Unload cycles (25°C, 50% rel. humidity) |
300,000 |
|
||
|
|
|
|
|
Supports Hotplug operation per the |
Yes |
|
||
Serial ATA Revision 3.2 specification |
|
|||
|
|
|
||
|
|
|
|
The following table footnotes apply to Table 1 and Table 2:
*All specifications above are based on native configurations.
**One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.
***During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels.
†Seagate does not recommend operating at sustained case temperatures above 60°C. Operating at higher temperatures will reduce useful life of the product.
Seagate SkyHawk Product Manual, Rev. B |
9 |
www.seagate.com |
|
|
|
Drive Specifications |
|
Table 2 Drive specifications summary for 4TB - 1TB models |
|
|
|
|
|
Drive Specification* |
ST4000VX007 |
ST3000VX010 |
|
ST2000VX008 |
ST1000VX005 |
|
|
|
|
|
|
Formatted capacity (512 bytes/sector)** |
4000GB (4TB) |
3000GB (3TB) |
|
2000GB (2TB) |
1000GB (1TB) |
|
|
|
|
|
|
Guaranteed sectors |
7,814,037,168 |
5,860,533,168 |
|
3,907,029,168 |
1,953,525,168 |
|
|
|
|
|
|
Heads |
6 |
6/5 |
|
4 |
2 |
|
|
|
|
|
|
Disks |
3 |
3 |
|
2 |
1 |
|
|
|
|
|
|
Bytes per sector |
|
4096 |
|
||
(4K physical emulated at 512-byte sectors) |
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
Default sectors per track |
|
|
63 |
|
|
|
|
|
|
|
|
Default read/write heads |
|
|
16 |
|
|
|
|
|
|
||
Default cylinders |
|
16,383 |
|
||
|
|
|
|
|
|
Recording density (max) |
2089kBPI |
1740kBPI |
1807kFCI |
||
|
|
|
|
||
Track density (avg) |
388ktracks/in |
346ktracks/in |
352ktracks/in |
||
|
|
|
|
||
Areal density (avg) |
810Gb/in2 |
613Gb/in2 |
625Gfc/in2 |
||
Internal data transfer rate (max) |
2107Mb/s |
1813Mb/s |
2147Mb/s |
||
|
|
|
|
|
|
Maximum sustained data rate, OD read (MB/s) |
190MB/s |
|
|
180MB/s |
|
|
|
|
|
|
|
|
|
PIO modes: 0 to 4 |
|
||
ATA data-transfer modes supported |
|
Multiword DMA modes: 0 to 2 |
|
||
|
|
Ultra DMA modes 0 to 6 |
|
||
|
|
|
|
||
I/O data-transfer rate (max) |
|
600MB/s |
|
||
|
|
|
|
||
Cache buffer |
|
64MB |
|
||
|
|
|
|
|
|
Height (max) |
|
26.1mm / 1.028 in |
20.20mm |
||
|
/ 0.795 in |
||||
|
|
|
|
|
|
|
|
|
|
||
Width (max) |
|
101.6mm /4.010 in |
|
||
|
|
|
|
||
Length (max) |
|
146.99mm / 5.787 in |
|
||
|
|
|
|
|
|
Weight (max) |
635g / 1.345 lb |
610g / 1.40 lb |
415g / 0.915 lb |
||
|
|
|
|
|
|
Average latency |
|
5.1ms |
|
||
|
|
|
|
|
|
Power-on to ready (max) |
|
<17.0s |
|
|
<6.0s |
|
|
|
|
|
|
Standby to ready (max) |
|
<17.0s |
|
|
<6.0s |
|
|
|
|
|
|
Average seek, read (typical) |
|
<12.0ms |
|
|
<8.5ms |
Average seek, write (typical) |
|
<12.0ms |
|
|
<19.5ms |
|
|
|
|
|
|
Startup current (typical) 12V |
|
1.8A |
|
|
1.2A |
|
|
|
|
||
Voltage tolerance (including noise) |
|
5V: ±5% |
|
||
|
12V: ±10% |
|
|||
|
|
|
|||
|
|
|
|
||
Non-Operating (Ambient °C) |
|
-40 to 70 |
|
||
|
|
|
|
|
|
Operating ambient temperature (min °C) |
|
|
5 |
|
|
|
|
|
|
|
|
Operating temperature (drive case max °C) |
|
|
70 † |
|
|
Temperature gradient |
|
20°C per hour max (operating) |
|
||
|
30°C per hour max (nonoperating) |
|
|||
|
|
|
|||
|
|
|
|
||
Relative humidity |
|
5% to 90% (operating) |
|
||
|
5% to 95% (nonoperating) |
|
|||
|
|
|
|||
|
|
|
|
||
Relative humidity gradient (max) |
|
30% per hour |
|
||
|
|
|
|
||
Wet bulb temperature (max) |
|
26°C max (operating) |
|
||
|
29°C max (nonoperating) |
|
|||
|
|
|
|||
|
|
|
|
||
Altitude, operating |
|
–304m to 3048m |
|
||
|
(–1000 ft to 10,000 ft) |
|
|||
|
|
|
|||
|
|
|
|
||
Altitude, non-operating |
|
–304m to12,192m |
|
||
(below mean sea level, max) |
|
(–1000ft to 40,000+ ft) |
|
||
|
|
|
|
||
Operational Shock (max) |
|
80 Gs at 2ms |
|
||
|
|
|
|
|
|
Seagate SkyHawk Product Manual, Rev. B |
10 |
www.seagate.com |
|
|
|
Drive Specifications |
|||
Table 2 Drive specifications summary for 4TB - 1TB models (continued) |
|
|
|
|
|||
Drive Specification* |
ST4000VX007 |
ST3000VX010 |
ST2000VX008 |
|
ST1000VX005 |
||
|
|
|
|
|
|
|
|
Non-Operational Shock (max) |
|
|
300 Gs at 2ms |
|
|||
|
|
|
|||||
|
2Hz to 22Hz: 0.25 Gs, Limited displacement |
|
|||||
Vibration, operating |
|
|
22Hz to 350Hz: 0.50 Gs |
|
|||
|
|
|
350Hz to 500Hz: 0.25 Gs |
|
|||
|
|
|
|
|
|||
|
|
|
5Hz to 22Hz: 3.0 Gs |
|
|||
Vibration, non-operating |
|
|
22Hz to 350Hz: 3.0 Gs |
|
|||
|
|
|
350Hz to 500Hz: 3.0 Gs |
|
|||
|
|
|
|
|
|
|
|
Drive acoustics, sound power |
|
|
|
|
|
|
|
|
|
|
|
|
|||
Idle*** |
2.3 bels (typical) |
|
1.9 bels (typical) |
||||
2.4 bels (max) |
|
2.0 bels (max) |
|||||
|
|
||||||
|
|
|
|
|
|
||
Seek |
2.5 bels (typical) |
|
2.1 bels (typical) |
||||
2.6 bels (max) |
|
2.2 bels (max) |
|||||
|
|
||||||
|
|
|
|
|
|
|
|
Non-recoverable read errors |
|
|
1 per 10 14 bits read |
|
|||
Mean time between failures (MTBF), hours |
|
|
1M |
|
|||
|
|
|
|||||
|
Average annualized workload rating: <180 TB/year. |
|
|||||
|
The AFR specification for the product assumes the I/O workload does not |
||||||
Rated Workload |
exceed the average annualized workload rate limit of 180 TB/year. Workloads |
||||||
exceeding the annualized rate may degrade the product AFR and impact |
|||||||
|
|||||||
|
reliability as experienced by the particular application. The average annualized |
||||||
|
workload rate limit is in units of TB per calendar year. |
|
|||||
|
|
||||||
|
To determine the warranty for a specific drive, use a web browser to access the |
||||||
|
following web page: |
|
|
|
|
||
Warranty |
http://www.seagate.com/support/warranty-and-replacements/ |
||||||
From this page, click on “Is my Drive under Warranty”. Users will be asked to |
|||||||
|
|||||||
|
provide the drive serial number, model number (or part number) and country |
||||||
|
of purchase. The system will display the warranty information for the drive. |
||||||
|
|
|
|
|
|||
Load/Unload cycles (25°C, 50% rel. humidity) |
300,000 |
|
|
— |
|||
|
|
|
|
|
|
||
Contact start-stop cycles (25°C, 50% rel. humidity) |
|
|
— |
|
50,000 |
||
|
|
|
|
|
|
|
|
Supports Hotplug operation per the |
|
|
Yes |
|
|||
Serial ATA Revision 3.2 specification |
|
|
|
||||
|
|
|
|
|
|
||
|
|
|
|
|
|
|
Model |
Formatted capacity* |
Guaranteed sectors |
Bytes per sector |
|
|
|
|
|
|
ST8000VX0022 |
8000GB |
15,628,053,168 |
|
|
|
|
|
|
|
ST6000VX0023 |
6000GB |
11,721,045,168 |
|
|
|
|
|
|
|
ST4000VX007 |
4000GB |
7,814,037,168 |
4096 |
|
|
|
|
||
ST3000VX010 |
3000GB |
5,860,533,168 |
||
|
||||
|
|
|
|
|
ST2000VX008 |
2000GB |
3,907,029, 168 |
|
|
|
|
|
|
|
ST1000VX005 |
1000GB |
1,953,525,168 |
|
|
|
|
|
|
*One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.
When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1, where n is the number of guaranteed sectors as defined above.
See Section 4.3.1, "Identify Device command" (words 60-61 and 100-103) for additional information about 48-bit addressing support of drives with capacities over 137GB.
Seagate SkyHawk Product Manual, Rev. B |
11 |