Schneider Electric TC-5242 Data Sheet

Thermostat

TC-5242

speciFicAtions

Type Low limit, single pole thermostat
Adjusting Screwdriver slot, adjusting knob on differential or range screw when required.
Contact Action Open on rise, close on rise, SPDT, as required.
Electrical Contacts Two single pole circuit. Main circuit opens on temperature fall and simultane-

ously the auxiliary or alarm contacts close.

Contact Unit Snap-acting high contact force right up to contact break point, no bounce,

Beryllium copper conductor leaves with Silver-Cadmium Oxide contacts.

Contact Ratings Main circuit contacts 16.0 Amps @ 120 vac, 600 V Max.

Auxiliary circuit contacts 6.0 Amps @ 120 vac, 600 V Max.

Temperature Range Adjustable range of 15° F to 55° F ( -9° C to 13° C).Low limit stop factory set

and sealed at 35° F (2° C).

Max Overrun Temp
on Bulb

Finish Gray baked enamel.
Case Material 0.062” (1.6 mm) cold rolled steel.
Cover Material 0.028” (0.7mm) cold rolled steel.
Element 20 Feet of 1/8 O.D. Tubing responds to lowest temperature along any one

Differential Lockout type, requires manual reset after cutout.
Mounting May be mounted in any position, two mounting holes provided in back of the

Shipping Weight 2.5 lb (1.1 kg) with knob
Dimensions 4” L x 3-1/4” H x 2” D ( 1016 mm L x 826 mm H x 508 mm D)

400° F (204° C).

foot portion.

case (mounting bracket included).

2

Notice: This product contains toluene, safely sealed
inside of bulb. Contact your local waste manage­ment authority for instructions regarding recycling
and the proper disposal of an old control contain­ing toulene in a sealed tube.

Schneider Electric

F-27615-2 August 2010 ao

© 2010 Schneider Electric. All rights reserved.