Schneider Electric ENCL-100 Series, ENCL-300 Series Data Sheet

SPECIFICATIONS

Construction

Environment

Table-1 Model Chart for Cabinets

Doors, Locking type, supplied with keys, rigidly supported (ENCL-300 only). The doors are

easily removed for protection on job site installation or mounting of components. See Table-1.

Steel Gauge, See Table-1. Knockouts, Aligned so that a short nipple may be used to couple the control cabinets. See

Table-1.

Appearance, Gray paint. Dimensions, See Table-1.

Location, NEMA Type 1. Mounting, Four extruded mounting holes 1/4" (6 mm)..

Part Number

ENCL-100 Removable Cover 20 None

Single,

ENCL-300

Continuously Hinged

Door

Type Op ening

Right or

Left-handed

Steel

Gauge

Subpanel Finish Knockouts in. (mm)

For 1/2" (13) and 3/4" (19) conduit, two on each end

Gray

ENCL-300-101 or Obtain Locally

For 3/4" (19) conduit, two on each side

Dimensions in.

(mm)

9-1/2 wide x 12 high x 3 deep

(241 x 305 x 76)

24 wide x 32 high x 7 deep

(610 x 813 x 178)

Table-2 Model Chart for Cabinet Subpanels

Part Number Description Dimensions in. (mm)

ENCL-300-101 Subpanel for ENCL-300, 16 gauge steel painted, flanged

ACCESSORIES

None.

MAINTENANCE PARTS

BYZP-268 Replacement lock for ENCL-300.

22-1/2 wide x 28 high

(572 x 711)

INSTALLATION

Inspection

Inspect the package for damage. If damaged, notify the appropriate carrier immediately. If undamaged, open the package and inspect the device for obvious damage. Return damaged products. Check the part number on the unit to be sure the correct control cabinet is being installed.

Requirements

• Job wiring diagrams

• Tools (not provided):

– Appropriate drill and drill bit for mounting screws

– Appropriate screwdrivers for mounting screws

– Appropriate subpanel (provided separately)

– Mounting screws/anchors

• Training: Installer must be a qualified, experienced technician

+ 2 hidden pages