EU DECLARATION OF CONFORMITY
We : Schneider Electric Industries SAS
List of references and options
Harmonized standard / Notified body reference
EN 61800-5-1: 2016 Compil
Adjustable speed electrical power drive systems – Part 5-1: Safety requirements –
Electrical, thermal and energy. (IEC 61800-5-1:2017)
EN 61800-3: 2017
Adjustable speed electrical power drive systems – part 3: EMC requirements and specific
test methods. (IEC 61800-3:2017)
Limited to the immunity part. No compliance to the emission level part.
35 rue Joseph Monier
Rueil Malmaison 92500 – France
Hereby declare under our sole responsibility that the products:
Are in conformity with the requirements of the following directives and conformity was checked in accordance with the
following standards.
Subject to correct installation, maintenance and use conforming to its intended purpose, to the applicable regulations and
standards, to the supplier's instructions and to accepted rules of the art.
This declaration becomes invalid in the case of any modification to the products not authorized by us.
Compliance with EMC Directive will require the application of the EMC guide giving requirements, details and advices for
installation of products used.
The guides are available on http://www.schneider-electric.com
Person in charge of technical documentation:
Frédéric Roussel, Schneider Toshiba Inverter Europe, rue André Blanchet, 27120 Pacy/Eure – France.
Issued at Carros - FRANCE: December 4th 2020 Name : Alain BERNERD
Industrial Control & Drives
Customer Satisfaction & Quality
Vice President
ATV310 - EU Declaration 2020-12 ORIGINAL DECLARATION, NO TRANSLATION WITHOUT WRITTEN AUTHORISATION Page 1 of 3
ATV310 - EU Declaration 2020-12 ORIGINAL DECLARATION, NO TRANSLATION WITHOUT WRITTEN AUTHORISATION Page 2 of 3
EU DECLARATION OF CONFORMITY
List of references ATV310:
Three phase 380V to 500Vac for China market
(1) may be followed by 1 to 3 character.
Three phase 380V to 500Vac for oversea market
(1) may be followed by 1 to 3 character.