Schneider Electric AP5717F, AP5719, AP5717G, AP5717UK, AP5717J User Manual

User Manual

Rack LCD Console

AP5717, AP5717F, AP5717G,

AP5717J, AP5717R, AP5717UK

AP5719

This manual is available in English on the enclosed CD.

Dieses Handbuch ist in Deutsch auf der beiliegenden CD-ROM verfügbar.

Este manual está disponible en español en el CD-ROM adjunto.

Ce manuel est disponible en français sur le CD-ROM ci-inclus.

Questo manuale è disponibile in italiano nel CD-ROM allegato.

本マニュアルの日本語版は同梱の CD-ROM からご覧になれます。

Данное руководство на русском языке имеется на прилагаемом компакт-диске.

.

您可以从包含的 CD 上获得本手册的中文版本。

동봉된 CD 안에 한국어 매뉴얼이 있습니다 .

American Power Conversion Legal Disclaimer

The information presented in this manual is not warranted by the American Power Conversion Corpora­tion to be authoritative, error free, or complete. This publication is not meant to be a substitute for a
detailed operational and site specific development plan. Therefore, American Power Conversion Corpo­ration assumes no liability for damages, violations of codes, improper installation, system failures, or any
other problems that could arise based on the use of this Publication.

The information contained in this Publication is provided as is and has been prepared solely for the pur­pose of evaluating data center design and construction. This Publication has been compiled in good faith
by American Power Conversion Corporation. However, no representation is made or warranty given,
either express or implied, as to the completeness or accuracy of the information this Publication contains.

IN NO EVENT SHALL AMERICAN POWER CONVERSION CORPORATION, OR ANY PAR­ENT, AFFILIATE OR SUBSIDIARY COMPANY OF AMERICAN POWER CONVERSION
CORPORATION OR THEIR RESPECTIVE OFFICERS, DIRECTORS, OR EMPLOYEES BE
LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL, OR
INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS
OF BUSINESS, CONTRACT, REVENUE, DATA, INFORMATION, OR BUSINESS INTER­RUPTION) RESULTING FROM, ARISING OUT, OR IN CONNECTION WITH THE USE OF,
OR INABILITY TO USE THIS PUBLICATION OR THE CONTENT, EVEN IF AMERICAN
POWER CONVERSION CORPORATION HAS BEEN EXPRESSLY ADVISED OF THE POS­SIBILITY OF SUCH DAMAGES. AMERICAN POWER CONVERSION CORPORATION
RESERVES THE RIGHT TO MAKE CHANGES OR UPDATES WITH RESPECT TO OR IN
THE CONTENT OF THE PUBLICATION OR THE FORMAT THEREOF AT ANY TIME
WITHOUT NOTICE.

Copyright, intellectual, and all other proprietary rights in the content (including but not limited to soft­ware, audio, video, text, and photographs) rests with American Power Conversion Corporation or its
licensors. All rights in the content not expressly granted herein are reserved. No rights of any kind are
licensed or assigned or shall otherwise pass to persons accessing this information.

This Publication shall not be for resale in whole or in part.

Contents

General Information........................................................ 1

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Symbols used in this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Taking Delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Inventory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Rear View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Installation ....................................................................... 7

Brackets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Rack LCD Console Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Cable installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Power On the Rack LCD console . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Operation ....................................................................... 10

Basic Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Opening the Rack LCD console . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Closing the Rack LCD console . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Powering off and restarting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Standby mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Hot plugging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

LCD OSD (On Screen Display) configuration . . . . . . . . . . . . . . . . . 10

Monitor settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

USB Peripheral Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Firmware Upgrade Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Start the upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Upgrade succeeded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Upgrade failed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Exit firmware upgrade mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Firmware upgrade recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Rack LCD Console User Manual

i

Troubleshooting ............................................................ 14

Specifications ................................................................ 15

ii

Rack LCD Console User Manual

General Information

Overview

The Rack LCD Console features an 17” or a 19” LCD panel, a full keyboard, and a touch pad in a rack­mountable sliding housing. The Rack LCD Console is intended for use with compatible target devices (a
KVM switch or server).

Symbols used in this manual

Note the definitions for the icons here and be observant for them throughout this manual. They are
intended to call attention to potential hazards and important information.

Electrical Hazard:

injury or death.

Warning: Indicates a hazard which, if not avoided, could result in personal injury or
death.

Caution: Indicates a potential hazard which, if not avoided, could result in damage to the

equipment or other property.

Note: Indicates important information.

Indicates that more information is available on the same subject either elsewhere in this
document or in another (named) document.

Indicates an electrical hazard which, if not avoided, could result in

1Rack LCD Console User Manual

Safety

Read and adhere to the following important safety considerations when working with the Rack LCD
Console.

Note: 1. Read all of the instructions. Follow all warnings and instructions.

2. All work must be performed by American Power Conversion (APC
personnel only.

Electrical Hazard:

Warning: 1. Route the power cord and cables so they cannot be stepped on or tripped over.

2. Avoid injury and equipment damage as a result of rack failure. Read and
adhere to the installation and safety instructions that accompany your racks.

1. If you are not sure if your power source is compatible with the

device requirements, consult your power company.

2. The device is designed for use with IT power distribution systems
with up to 230V phase-to-phase voltage.

3. Do not overload the AC branch circuit that provides power to the
rack.

4. To prevent damage make sure all devices are properly grounded.

5. The device is equipped with a 3-wire grounding type plug. Have an
electrician update your outlet if the plug does not fit. Do not attempt
to defeat the grounding plug.

6. Do not exceed the total ampere rating of extension cords if
used. Make sure extension cords or power strips are properly
grounded.

7. Protect the system from sudden changes in electrical power with
a surge suppressor or uninterruptible power supply (UPS).

®

) authorized

Caution:1. Serious damage will result if the device is dropped or falls.

2. Do not block ventilation openings. The Rack LCD Console requires proper air
flow for safe operation.

3. Do not place the device near or over radiators or heat registers.

4. The rack ambient temperature should be not greater than 104°F (40°C).

5. Do not use the device near water. Do not spill any liquid on the device.

6. Do not use liquid or aerosol cleaners. Clean the device with a damp cloth.

7. Use only the hardware provided to install the Rack LCD Console in the rack.

Slide/Rail Caution: Slide/rail mounted equipment is not to be used as a shelf or a work
space.

Rack LCD Console User Manual2