Samsung VP-M50, VP-M51, VP-M51B, VP-M52, VP-M53 User Manual

...

ENGLISH

Video Camcorder

8mm

VP-M50/M51/M51B/M52/M53/M54

VP-M50/M51/M51B/M52/M53

Before operating the unit, please read this instruction book thoroughly, and retain it for future reference.

VP-M54

Owner’s Instruction Book

This product meets the intent of Directive 89/336 CEE, 73/23 CEE, 93/68 CEE.

ELECTRONICS

ENGLISH

Pr Gett

Features..........................................................................................................................................................8

Descriptions

■

Front View/Side View/Rear View................................................................................................9, 10, 11

■

OSD (On Screen Display) ...................................................................................................................12

Accessories Supplied with Camcorder .........................................................................................................14

Remote Control.............................................................................................................................................15

■

Self Recording with the Remote Control..............................................................................................15

Settin

Adjusting the Hand Strap and Shoulder Strap..............................................................................................16

Lithium Battery Installation ............................................................................................................................17

Connecting the Power Source......................................................................................................................18

■

To use AC Power Adapter ....................................................................................................................18

■

To use Battery Pack .............................................................................................................................19

Using the Battery Pack .................................................................................................................................20

■

Table of continuous recording time ......................................................................................................20

■

Display of Battery Level........................................................................................................................21

Inserting and Ejecting a Cassette ................................................................................................................22

Bas

Making the First Shooting.............................................................................................................................23

Tips for Stable Image Shooting ...................................................................................................................25

■

Shooting with Viewfinder......................................................................................................................25

Adjusting Focus of the VIEWFINDER...........................................................................................................25

Playing back the tape on the CAMCORDER................................................................................................26

■

Viewing a Still Picture ...........................................................................................................................27

■

Picture Search......................................................................................................................................27

Zooming In and Out......................................................................................................................................28

Digital Zoom..................................................................................................................................................29

ENGLISH

Table of Contents (continued)

DIS (Digital Image Stabilizer, VP-M53/M54 only).........................................................................................31

MF/AF (Manual Focus/Auto Focus)..............................................................................................................32

XDR/BLC.......................................................................................................................................................33

Program AE (Automatic Exposure)...............................................................................................................34

DSE (Digital Special Effect) in CAMERA mode............................................................................................36

Setting and Recording the DATE/TIME........................................................................................................38

Selecting and Recording a Title ....................................................................................................................40

Fade In and Out............................................................................................................................................42

PIP ................................................................................................................................................................43

Snap Shot .....................................................................................................................................................44

White Balance...............................................................................................................................................45

Setting the Remote Control...........................................................................................................................46

Demonstration...............................................................................................................................................47

Lighting Techniques ......................................................................................................................................48

To see with TV monitor.................................................................................................................................49

Various Functions in PLAYER mode.............................................................................................................51

Setting the Remote Control...........................................................................................................................52

DSE in PLAYER mode..................................................................................................................................52

Cleaning and Taking care of the Camcorder ................................................................................................52

■

Cleaning the Viewfinder ......................................................................................................................52

■

Cleaning the Video Heads ...................................................................................................................53

■

Storing the Camcorder .........................................................................................................................53

Usi Troublesh

Self Diagnosis Display .................................................................................................................................55

Moisture Condensation.................................................................................................................................58

Spec Inde

Pow

ENGLISH

Precautions and Safety Instructions

Taking care of the battery pack

✤ Do not allow any metal objects to touch

the terminals, as this can cause a short circuit and damage the battery pack.

Keep the terminals clean.

✤ The camera, adapter or battery pack will not work properly if the terminals are dirty.

Check them before use, and wipe them with a dry cloth or tissue if necessary.

Precautions regarding the LENS

✤ Do not let LENS point toward the sun.

Direct sunlight can damage the CCD. (*CCD: Charge Coupled Device)

Precautions and Safety Instructions

Precautions regarding electronic viewfinder

1) Do not place the camcorder so that the

viewfinder is pointing towards the sun. Direct sunlight can damage the inside of the viewfinder. Be careful when placing the camcorder under sunlight or by a window.

2) Do not pick up the camcorder by the

viewfinder.

3) Unintended rotation may cause damage

to the viewfinder.

Precautions regarding moisture condensation

1) A sudden rise in atmospheric temperature may cause condensa-

tion to form inside the camcorder.

for example:

■ When you take the camcorder from cold temperature outside to

warm temperature inside during the winter.

■ When you take the camcorder from cool temperature inside to hot

temperature outside during the summer.

2) If the “DEW” protection feature is activated, leave the camcorder

in the dry and warm room with the cassette compartment opened and the battery removed.

ENGLISH

3) If the “DEW” protection feature is activated unexpectedly, and you

want to override it, reinstall the battery pack and the lithium battery after detaching the battery pack and lithium battery. Please make sure that the condensation has disappeared completely. (see page 58)

DEW

ENGLISH

Precautions and Safety Instructions

Precautions regarding the battery pack

✤ Make sure that the battery pack is charged before shooting outdoors. ✤ To preserve battery power, keep your camcorder turned off when you are not operating it. ✤ When your camcorder is in CAMERA mode, if it is left in STANDBY for more than 5~7 minutes without

operation, it will automatically turn off to protect against unexpected battery discharge.

✤ Make sure that the battery pack is fitted firmly into place.

Dropping the battery pack might damage it.

✤ When the battery reaches the end of its life please contact your local dealer. The batteries have to

be dealt as chemical waste.

arning: Keep the LITHIUM BATTERY out of the reach of children. Should the battery be swal-

✤ The lithium battery maintains the clock function, title and preset contents memory; even if the battery ✤ The lithium battery for the camcorder lasts about 8~10 months under normal operation from time of ✤ When the lithium battery becomes weak or dead, the date/time indicator flashes about 5 seconds

lowed, consult a doctor immediately.

pack or AC power adapter is removed. installation. when you set the power switch to CAMERA. In this case, replace the lithium battery with CR2025 type.

(see page 17)

WARNING:

LITHIUM BATTERYMUST BE RECYCLED OR DISPOSED OF PROPERLY.

*When the lithium battery

becomes weak or dead please contact your local dealer. The batteries have to be dealt with as chemical waste.

ENGLISH

Precautions and Safety Instructions

Precautions regarding the hand strap

✤ It is very important to adjust the hand strap for better

shooting. (see page 16)

✤ Do not insert your hand in the hand strap forcibly,

the buckle may be damaged.

Precautions regarding the video head cleaning

✤ To ensure normal recording and clear picture, clean the video heads. When playing back the pictures ,

if they are noisy or hardly visible, the video heads may be dirty. If this happens, clean the video heads with the dried type cassette cleaner.

✤ Do not use a wet type cassette cleaner. It may damage the video heads. (see page 53)

5 minutes off timer in STANDBY mode

✤ To protect against tape and head-drum wear, your camcorder will automatically turn off if it is left in

STANDBY mode without operation for more than 5~7 minutes.

ENGLISH

Getting to Know Your Camcorder

Features

Your camcorder has many features for shooting and playing back.

Snap Shot (VP-M53/M54 only)

The Snap Shot function lets you shoot an object at a standstill for a limited time in Camera mode. (see page 44)

PIP (VP-M53/M54 only)

The PIP function shows where the center of image is while shooting in Digital Zoom of the Camera mode. (see page 43)

XDR/BLC

■

BLC for VP-M50/M51/M51B/M52/M53.

When you shoot a subject with the light source behind the subject or a subject with a light background, use the XDR/BLC function. (see page 33)

■

XDR: Extended Dynamic Range

DSE (Digital Special Effects)

The DSE allows a creative look to your films by adding various special effects.(see page 36)

Program AE (Auto Exposure)

The Program AE allows the shutter speed and aperture to adjust to the type of picture to be filmed. (see page 34)

DIS (VP-M53/M54 only)

The DIS compensates unstable images caused by hand shake, particularly at high magnification. (see page 31)

22x High ratio zoom lens

Zooming is a recording technique that lets you change the size of the subject in the picture. For more professional recordings, use the zoom function. (see page 28)

Digital Zoom

Higher than 22x zoom is achieved digitally. (see page 29)

Macro

The macro function allows you to shoot your subject at close range. You have to adjust the zoom fully wide for macro shooting. (see page 28)

Getting to Know Your Camcorder

Front View

ENGLISH

3. PLAY/STILL

2. Edit/SEARCH (REW)

1. Lens

15. Remote Sensor

14. MIC

11. POWER

12. MF Dial

1. Lens (see page 59)

2. EDIT/SEARCH (REW)

EDIT/SEARCH works in STANDBY mode. (see page 24) REW works in PLAYER mode. (see page 51)

3. PLAY/STILL

PLAY/STILLworks in PLAYER mode. (see page 50)

4. EDIT/SEARCH (FF)

EDIT/SEARCH works in STANDBY mode. (see page 24) FF works in PLAYER mode. (see page 51)

5. DATE/TIME(STOP)

DATE/TIME works in CAMERAmode. (see page 38) STOP works in PLAYER mode. (see page 50)

6. TAPE EJECT

Use when ejecting the tape. (see page 22)

7. EVF(Electronic Viewfinder, see page 52)

4. Edit/SEARCH (FF)

5. DATE/TIME(STOP)

6. TAPE EJECT

7. EVF

8. PIP(Z.RETURN)

9. FADE

10. XDR/BLC

13. MF

8. PIP(Z.RETURN)

PIP works in CAMERA mode. (VP-M53/M54 only, see page 43)

9. FADE

FADE works in CAMERAmode. (see page 42)

10. XDR/BLC

XDR/BLC works in CAMERA mode. (BLC for VP-M50/M51/M51B/M52/M53, see page 33)

11. POWER switch (see page 18)

- CAMERA : Select to shoot.

- OFF : Select to turn off the camcorder.

- PLAYER :Select to play back.

12. MF dial (see page 32)

MF dial works in CAMERA mode.

13. MF (see page 32)

MF works in CAMERA mode.

14. MIC

MIC works in CAMERA mode.

15. Remote Sensor (see page 15)

ENGLISH

Getting to Know Your Camcorder

Side View

16. MENU ON/OFF

23. C.RESET

24. DISPLAY

25. Lithium Battery

22. TITLE

20. PROGRAM AE

21. DSE

17. ENTER

18. MENU Dial

19. S-VIDEO out

16. MENU ON/OFF (see page 30)

MENU ON/OFF works in CAMERA and PLAYER mode.

17. ENTER (see page 30)

ENTER works in MENU mode.

18. MENU dial

Menu dial works in MENU mode. (see page 30)

19. S-VIDEO out (VP-M54 only, see page 50)

20. PROGRAM AE (see page 34)

PROGRAM AE (Auto Exposure) works in CAMERA mode.

21. DSE (see page 36)

DSE works in CAMERA and PLAYER mode.

22. TITLE (see page 40)

TITLE works in CAMERA mode.

23. C. RESET (Counter Reset)

Use to reset the tape counter.

24. DISPLAY

Use to turn the OSD on or off.

25. Lithium Battery (see page 17)

Getting to Know Your Camcorder

Rear View

26. ZOOM

ENGLISH

37. BATTERY EJECT

28. Hooks for shoulder strap

36. Battery Pack compartment

39. Recharging Indicator

35. DC jack

33. START/STOP

32. LOCK/STANDBY

26. ZOOM (see page 28)

27. Cassette holder

28. Hooks for shoulder strap (see page 17)

29. AUDIO/VIDEO out (see page 49)

30. LENS cap

31. Hand strap (see page 16)

32. LOCK/STANDBY (see page 18)

- LOCK : off

- STANDBY : CAMERA

27. Cassette holder

38. SNAP SHOT/D.ZOOM

29. AUDIO/VIDEO out

34. External MIC

30. LENS cap

31. Hand strap

33. START/STOP (see page 23)

START/STOP works in CAMERA mode.

34. External MIC (see page 59)

35. DC jack (see page 18)

36. Battery pack compartment (see page 19)

37. BATTERY EJECT

38. SNAP SHOT/D.ZOOM

SNAP SHOT works in CAMERA mode. (VP-M53/M54 only, see page 44) D.ZOOM works in CAMERA mode. (VP-M50/M51/M51B/M52 only, see page 30)

39. Recharging Indicator (see page 19)

ENGLISH

Getting to Know Your Camcorder

OSD (On Screen Display)

✤ The OSD on/off switch is operated by using the DISPLAY button. ✤ The title and date/time functions can be operated even after the OSD is turned off. ✤ The OSD is displayed in the viewfinder and the monitor.

a. Zoom position (see page 29)

Indicates zoom position.

OSD in CAMERA mode

b. DIS (VP-M53/M54 only)

(see page 31)

Indicates DIS is activating.

c. Battery level (see page 21)

Indicates the power left in the battery. ( )

d. Manual Focus (see page 32)

Indicates manual focus is on. Auto Focus is not displayed.

e. XDR/BLC (see page 33)

(BLC for VP-M50/M51/M51B/M52/M53) Indicates XDR or BLC is activating.

f. Program AE (see page 34)

Indicates Program AE mode is activating. ( , , , , HSS )

Self record waiting timer. (see page 15)

Indicates 10 seconds timer.

h. Self record recording timer.

(see page 15)

(30 seconds or END).

i. Date (see page 38)

Indicates the date of the shooting.

c d

g h

OSD in PLAYER mode

a r q pb

W T 440 Hi8 REC

M.FOCUS DEW INDOOR XDR/BLC TAPE

WAIT-10S 13:10 SELF-30S 29. AUG. 2002

xWT

PICNIC

DEW LP TAPE Z.RTN

CINEMA

q p

Hi8 PLAY

0:00:00

0:00:25

o n v m

l k

j i

o n t

u l

ENGLISH

Getting to Know Your Camcorder

OSD (On Screen Display)

j. Time (see page 38)

Indicates the time of the shooting.

k. Title (see page 40)

Indicates the title of the recording. It is superimposed on the scene.

l. Self diagnosis (see page 55)

(TAPE, TAPE END) Checks the operation of the Camcorder.

m. DSE (Digital Special Effect) (see page 36)

Indicates the DSE mode is activating. The operation modes are MAKE-UP, EMBOSS, WIDE(16:9), CINEMA, NEG., MIRROR, MOSAIC, B&W, SEPIA, GHOST, STROBE and LSS.

n. Tape counter

Indicates amount of the tape used. We recommend that you reset the tape counter with the COUNTER RESET button before you start shooting.

o. Operation mode

Indicates the operation mode is activating. The operation modes are STBY, REC, STOP, PLAY, FF, REW.

p. Hi8 (VP-M54 only) (see page 50)

Indicates the use of the Hi8 tape in shooting or playing back.

q. DEW condensation (see page 58)

Monitors the moisture condensation.

r. Digital zoom (see page 29)

Indicates digital zoom is activating.

s. Snap Shot (see page 44)

Indicates the left time of the Snap Shot Shooting.

t. Playback speed (see page 50)

Indicates the playback speed in PLAYER mode. SP is not displayed.

u. Zero return (see page 51)

Indicates that the zero return is activating.

v. White Balance mode (see page 45)

Indicates the White Balance mode is activing. The White Balance modes are AUTO, INDOOR and OUTDOOR.

ENGLISH

Getting to Know Your Camcorder

Accessories Supplied with Camcorder

Make sure that the following basic accessories are supplied with your camcorder.

Basic Accessory

1. AC Power Adapter. (see page 18)

2. AC cord. (see page 18)

3. Battery Pack. (see page 19)

4. Audio/Video Cable. (see page 49)

5. Shoulder strap. (see page 17)

6. Instruction Book.

7. Remote Control. (see page 15) (VP-M51/M51B/M52/M53/M54)

8. Batteries for Remote Control. (see page 15)

9. Lithium Battery for Clock. (TYPE: CR2025, see page 17)

Optional Accessory

10. Scart adapter. (see page 49)

11. S-VIDEO cable. (see page 50) (VP-M54 only)

12. Cassette. (see page 22)

13. Carrying Case.

: Optional accessories may be included with

Note

the camcorder, depending on the country in which it is purchased.

1. AC Power Adapter

4. AUDIO/VIDEO Cable

7. Remote Control

10. Scart adapter

13. Carrying Case

2. AC cord 3. Battery Pack

5. Shoulder Strap

8. Two R6 AA batteries

11. S-VIDEO cable 12. Cassette

6. Instruction Book

Video Camcorder

8mm

9. Lithium Battery

Getting to Know Your Camcorder

Remote Control (VP-M51/M51B/M52/M53/M54)

Description of Parts

1. Start/Stop (see page 23)

2. Self Timer

3. Still (see page 51)

4. WIDE (see page 28)

5. TELE (see page 28)

6. Display (see page 12)

7. (Play) (see page 50)

8. (FF) (see page 51)

9. (REW) (see page 51)

10. (Stop) (see page 50)

Battery Installation to the Remote Control

✤ You must insert or replace these batteries when:

- You purchase the camcorder.

- The remote control doesn’t work.

✤ Insert two AAbatteries, following the + and - markings. ✤ Be careful not to reverse the polarity of the battery.

Self Recording with the Remote Control

✤ The Self Timer function on the remote control allows you to

start and stop recording automatically.

ENGLISH

1 2

3 7 9

4 5 6

Example:

picture with all members of your family

✤ Two options are available

- WAIT-10S/SELF-30S: wait 10 seconds, followed by 30 seconds of recording.

- WAIT-10S/SELF-END: wait 10 seconds, followed by recording until you press the START/STOP button again.

ENGLISH

Setting-up the Camcorder

1. Set power switch to CAMERA mode and LOCK/STANDBY switch to STANDBY mode.

2. Press Self Timer button until the appropriate indicator is displayed on the Viewfinder:

■ WAIT-10S/SELF-30S

■ WAIT-10S/SELF-END

3. Press START/STOP button to start the timer. : After waiting for 10 seconds, recording starts. : If you have selected SELF-30S, recording stops

automatically after 30 seconds.

: If you have selected SELF-END, press

START/STOP again when you wish to stop recording.

When recording with the timer, you can press START/STOP button again to cancel the function.

Note:

WAIT-10S SELF-30S

Adjusting the Hand Strap and Shoulder Strap

Hand Strap

✤ It is very important to adjust the hand strap for better shooting. ✤ The hand strap enables you to:

- Hold the camcorder in a stable, comfortable position.

- Press the Zoom and the red Record button without having to change the position of your hand.

1. Pull open the Hand Strap cover and release the Hand Strap, adjust its length and stick it back onto the Hand Strap cover.

2. Close the Hand Strap cover back up again.

ENGLISH

Setting-up the Camcorder

Shoulder Strap

✤ The Shoulder Strap allows you to carry your camcorder with complete safety.

1. Insert each end of the strap into the hooks on the camcorder.

2. Put the end of each strap through the buckle then, adjust the length of the strap.

Lithium Battery Installation

✤ The lithium battery maintains the clock function, title and preset contents of the memory; even if the

battery pack or AC power adapter is removed.

✤ The lithium battery for the camcorder lasts about 8~10 months under normal operation from the time of

installation.

✤ When the lithium battery becomes weak or dead, the date/time indicator flashes about 5 seconds

when you set the power switch to CAMERA. In this case, replace the lithium battery with CR2025 type.

1. Take out the holder from the lithium battery

compartment.

2. Insert the side of the lithium battery toward

the bottom of the holder.

3. Reinsert the holder into the lithium battery

compartment.

If the holder is inserted into a wrong direction,

Note:

it will not fit correctly.

arning: Keep the LITHIUM BATTERY out of the reach of the children. Should the battery be

swallowed, consult a doctor immediately.

ENGLISH

Setting-up the Camcorder

Connecting the Power Source

✤ There are two ways to connect power source.

- Using the AC Power Adapter : used for indoor shooting.

- Using the Battery Pack: used for outdoor shooting.

To use AC Power Adapter

1. Connect the AC Power Adapter to a AC cord.

2. Connect the AC cord to a wall socket.

3. Connect the other end of the DC cable to DC jack of

4. To set the camcorder to CAMERAmode.

Note:

The plug and wall socket type can be different

Note:

according to the regional conditions.

the camcorder.

a. Hold down the tab of the power switch and push the switch

to CAMERA mode. b. Set LOCK/STANDBY switch to STANDBY mode. c. Make sure that the Lens Cap is opened. d. Make sure that the image appears in the Viewfinder.

If the adapter is used next to the TV or the camcorder, it may cause the TV or camcorder to emit noise. Move the adapter away from the TV, camcorder or the antenna cable.

4-a

CAMERA

4-b

STANDBY

ENGLISH

Setting-up the Camcorder

To use Battery Pack

How long will the battery last for shooting?

✤ It depends how often it’s used in STANDBY mode. ✤ How often zoom lens are used in shooting. Prepare as many battery packs as possible.

Recharging the Battery Pack

1. Attach the battery pack to the camcorder.

2. Connect the AC Power Adapter to a AC cord and Connect the AC cord to a wall socket.

3. Connect DC cable to DC jack of the camcorder.

4. Turn off the power of camcorder, and the recharging indicator will start blinking and begin recharging.

- Blinking once a second : Indicates less than

50% has been charged.

- Blinking twice a second : Indicates 50% ~ 75%

has been recharged.

- Blinking three times a second : Indicates 75% ~ 100% has been recharged.

- Blinking stops and stays on : Recharging has been completed.

- On for a second and off for a second : Indicates there are some error.

Reset the battery pack and DC cable.

5. If recharging is completed, separate the camcorder, AC power adapter, and battery pack.

- Even if the power is turned off, battery will be discharged.

Battery pack may be charged a little at the time of purchase.

Note:

2 3

OFF

+ 44 hidden pages