Samsung CLP415NW Users Manual

Replacing the toner cartridge

3. Maintenance

66

Replacing the toner cartridge

3. Maintenance

67

Replacing the waste toner container

When the life span of the waste toner container has expired, waste toner container-related message appears on the screen display of the control panel, indicating
the waste toner container needs to be replaced. Check the waste toner container for your machine (see "Available consumables" on page 56). For information about
installing the waste toner container, refer to the waste toner container installation guide included on the package.

• Toner particles can be released inside the machine but it does not mean the machine is damaged. Contact a service representative when print quality problems
occur.

• When you pull out the waste toner container out of the machine, move the container carefully not to drop it from your hands.

• Make sure that you lay the waste toner container on a flat surface so that the toner does not spill.

Do not tilt or turn over the container.

3. Maintenance

68

Installing accessories

4

Precautions

• Disconnect the power cord

Never remove the control board cover while the power is turned on.

To avoid the possibility of an electrical shock, always disconnect the power
cord when installing or removing ANY internal or external accessories.

• Discharge static electricity

The control board and internal accessories (network interface card or
memory module) are sensitive to static electricity. Before installing or
removing any internal accessories, discharge static electricity from your
body by touching something metal, such as the metal back plate on any
device plugged into a grounded power source. If you walk around before
finishing the installation, repeat this procedure to discharge any static
electricity again.

When installing accessories, the battery inside the machine is a service
component. Do not change it by yourself. There is a risk of an explosion if
battery is replaced by an incorrect type. Dispose used batteries according to
the instructions.

5

Setting Device Options

When you install the optional devices such as optional tray, memory, etc, this
machine automatically detects and sets the optional devices. If you cannot use
the optional devices you installed in this driver, you need to set the optional
devices in Device Options.

Click the Windows Start menu.

1

For Windows 2000, select Settings > Printers.

2

• For Windows XP/2003, select Printers and Faxes.

• For Windows 2008/Vista, select Control Panel > Hardware and
Sound > Printers.

• For Windows 7, select Control Panel > Hardware and Sound >
Devices and Printers.

• For Windows Server 2008 R2, select Control Panel > Hardware >
Devices and Printers.

Right-click your machine.

3

For Windows XP/2003/2008/Vista, press Properties.

4

For Windows 7 and Windows Server 2008 R2, from context menus, select
the Printer properties.

3. Maintenance

69

Installing accessories

If Printer properties item has ൘ mark, you can select other printer drivers
connected with selected printer.

Select Device Options.

5

• Admin Job Accounting: Allows you to associate user and account
identification information with each document you print.

- User permission: If you check this option, only users with user

permission can start a print job.

- Group permission: If you check this option, only groups with

group permission can start a print job.

The Properties window may differ depending on the driver or operating
system you are using.

• If you want to encrypt job accounting password, check Job Accounting

Password Encryption.

Select the appropriate option.

6

• Administrators can enable job accounting and configure permissions in

the control panel or SyncThru™ Web Service.

• Custom Paper Size Settings: You can specify custom paper size.

Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine.

Click OK until you exit the Properties or Printer properties window.

7

• Tray Options: Select the optional tray you installed. You can select
the tray.

• Storage Options: Select the optional memory you installed. If this
feature is checked, you can select the Print Mode in printer driver
("Using optional device features" on page 221).

• Printer Configuration: Select the printer language (SPL/PCL 6) for
the print job.

• Administrator Settings: You can select the Printer Status and EMF

Spooling.

3. Maintenance

70

Installing accessories

6

Upgrading a memory module

Your machine has a dual in-line memory module (DIMM). Use this memory module slot to install additional memory. We recommend the use of only genuine
Samsung DIMM's. You may void your warranty if it is determined that your machine problem is being caused by third party DIMM's.

The order information is provided for optional accessories (see "Available accessories" on page 58).

After installing the optional memory, you can use the advanced printing features, such as proofing a job and specifying of printing a secure print job in the printer
properties window. You can controll the active job queue and file policy in Job Manage menu (see "Using optional device features" on page 221).

1

2

2

1

3. Maintenance

71