Samsung CLP-415N User Guide
Samsung Printer Xpress
CLP-41x series
CLP-68x series
C181x series
User’s Guide
User’s Guide
BASIC
BASIC
This guide provides information concerning installation, basic operation and
troubleshooting on Windows.
ADVANCED
This guide provides information about installation, advanced configuration, operation and
troubleshooting on various OS environments.
Some features may not be available depending on models or countries.
1. Introduction
3. Maintenance
Key benefits 5
Features by models 7
Useful to know 9
About this user’s guide 10
Safety information 11
Machine overview 16
Control panel overview 20
Turning on the machine 22
Installing the driver locally 23
Reinstalling the driver 25
2. Menu Overview and Basic Setup
Menu overview 27
Ordering supplies and accessories 54
Available consumables 55
Available accessories 57
Available maintenance parts 58
Storing the toner cartridge 59
Redistributing toner 61
Replacing the toner cartridge 63
Replacing the waste toner container 67
Installing accessories 69
Monitoring the supplies life 73
Setting the toner low alert 74
Cleaning the machine 75
Tips for moving & storing your machine 79
Machine’s basic settings 30
Media and tray 32
Basic printing 44
Using USB memory device 50
4. Troubleshooting
Tips for avoiding paper jams 81
Clearing paper jams 82
Understanding the status LED 94
Understanding display messages 97
2
5. Appendix
Specifications 104
Regulatory information 117
Copyright 127
3
1. Introduction
This chapter provides information you need to know before using the machine.
•Key benefits 5
• Features by models 7
• Useful to know 9
• About this user’s guide 10
• Safety information 11
• Machine overview 16
• Control panel overview 20
• Turning on the machine 22
• Installing the driver locally 23
• Reinstalling the driver 25
Key benefits
Environmentally friendly
• To save toner and paper, this machine supports Eco feature (see "Eco
printing" on page 47).
• To save paper, you can print multiple pages on one single sheet of paper
(see "Using advanced print features" on page 227).
• To save paper, you can print on both sides of the paper (double-sided
printing) (or Manual) (see "Using advanced print features" on page 227).
• To save electricity, this machine automatically conserves electricity by
substantially reducing power consumption when not in use.
• We recommend using recycled paper for saving energy.
Fast high resolution printing
• You can print in a full range of colors using cyan, magenta, yellow, and black.
• You can print with a resolution of up to 9,600 x 600 dpi effective output (600
x 600 x 4 bit).
• Fast, on-demand printing.
- CLP-41x series/C181x series
▪ For single-side printing, up to 18 ppm (A4) or up to 19 ppm (Letter).
- CLP-68x series
▪ For single-side printing, up to 24 ppm (A4) or up to 25 ppm (Letter).
▪ For duplex printing, up to 12 ppm (A4) or up to 12 ppm (Letter).
Convenience
• Simply touch your cell phone on the NFC tag on your printer and get the
print job done (see "Using the NFC feature" on page 197).
• You can print on the go from your smartphone or computer using Google
Cloud Print™ enabled apps (see "Google Cloud Print™" on page 201).
• Easy Capture Manager allows you to easily edit and print whatever you
captured using the Print Screen key on the keyboard (see "Easy Capture
Manager" on page 248).
• Samsung Easy Printer Manager and Printing Status is a program that
monitors and informs you of the machine’s status and allows you to
customize the machine’s settings (see "Using Samsung Easy Printer
Manager" on page 256 or "Using Samsung Printer Status" on page 259).
• Samusng AnyWeb Print helps you screen-capture, preview, scrap, and print
the screen of Windows Internet Explorer more easily than when you use the
ordinary program (see "Samsung AnyWeb Print" on page 249).
Key benefits
• Smart Update allows you to check for the latest software and install the
latest version during the printer driver installation process. This is available
only for Windows.
• If you have Internet access, you can get help, support application, machine
drivers, manuals, and order information from the Samsung website,
www.samsung.com > find your product > Support or Downloads.
Wide range of functionality and application support
• Supports various paper sizes (see "Print media specifications" on page 106).
• Print watermark: You can customize your documents with words, such as
“CONFIDENTIAL” (see "Using advanced print features" on page 227).
• Print posters: The text and pictures of each page of your document are
magnified and printed across the multiple sheets of paper and can then be
taped together to form a poster (see "Using advanced print features" on
page 227).
• You can print in various operating systems (see "System requirements" on
page 112).
• Your machine is equipped with a USB interface and/or a network interface.
Supports various wireless network setting method
• Using the WPS (Wi-Fi Protected Setup™) button
- You can easily connect to a wireless network using the WPS button on
the machine and the access point (a wireless router).
• Using the USB cable or a network cable
- You can connect and set various wireless network settings using a USB
cable or a network cable.
• Using the Wi-Fi Direct
- You can conveniently print from your mobile device using the Wi-Fi or
Wi-Fi Direct feature.
See "Introducing wireless set up methods" on page 154.
Features by models
Some features and optional goods may not be available depending on
model or country.
Operating System
(●: Included, Blank: Not available)
Software
Software
CLP-41x series
CLP-68x series
C181x series
Operating System
Windows ● ●
Mac ● ●
Linux ● ●
Unix ● ●
CLP-41x series
CLP-68x series
C181x series
You can install the printer driver and software when you insert the
software CD into your CD-ROM drive.
SPL printer driver ● ●
PCL printer driver ● ●
PS printer driver ●
(C181x series
XPS printer driver
Samsung
Easy Printer
a
Device
Settings
a
)
● ●
● ●
●
Manager
Samsung Printer Status ● ●
Direct Printing Utility
a
Samsung AnyWeb Print
a
● ●
● ●
SyncThru™ Web Service ● ●
SyncThru Admin Web
● ●
Service
Easy Eco Driver ● ●
Easy Capture Manager ● ●
For Windows, select the printer driver and software in the Select
Software to Install window.
Samsung Easy Color
Manager
a. Download the software from the Samsung website and install it: (http://
www.samsung.com > find your product > Support or Downloads). Before installing,
check whether your computer’s OS support the software.
a
● ●
(●: Included, Blank: Not available)
Features by models
Variety feature
(●: Included, ○: optional, Blank: Not available)
Features
CLP-41x series
C181x series
CLP-68x series
Hi-Speed USB 2.0 ● ●
IEEE 1284B parallel connector
a
○
Network Interface Ethernet 10/
100/1000 Base TX wired LAN
● ●
Network Interface 802.11b/g/n
wireless LAN
b
●
(CLP-41xNW/
C181xW only)
●
(CLP-68xDW only)
NFC (Near Field
Communication) printing
●
(C181xW only)
Eco printing ● ●
Duplex (2-sided) printing ●
Duplex (2-sided) printing
(manual)
c d
●
USB memory interface ●
Memory module ○ ○
Optional tray (Tray2) ○
Mass Storage Device (HDD)
AirPrint
●
(CLP-41xNW/
C181xW only)
Google Cloud Print™ ● ●
a. If you use the parallel port, you cannot use the USB cable.
b. Depending on your country, wireless LAN card may not be available. For some
countries, only 802.11 b/g can be applied. Contact your local Samsung dealer or the
retailer where you bought your machine.
c. Available for Windows OS users only.
d. Only tray1 is supported.
Features
CLP-41x series
C181x series
CLP-68x series
Useful to know
The machine does not print.
• Open the print queue list and remove the document from the
list (see "Canceling a print job" on page 45).
• Remove the driver and install it again (see "Installing the driver
locally" on page 23).
• Select your machine as your default machine in your Windows
(see "Setting your machine as a default machine" on page 226).
Where can I purchase accessories or supplies?
• Inquire at a Samsung distributor or your retailer.
• Visit www.samsung.com/supplies. Select your country/region
to view product service information.
The status LED flashes or remains constantly on.
A paper jam has occurred.
• Open and close the door (see "Front view" on page 17).
• Check the instructions on removing jammed paper in this
manual and troubleshoot accordingly (see "Clearing paper
jams" on page 82).
Printouts are blurry.
• The toner level might be low or uneven. Shake the toner
cartridge (see "Redistributing toner" on page 61).
• Try a different print resolution setting (see "Opening printing
preferences" on page 45).
• Replace the toner cartridge (see "Replacing the toner
cartridge" on page 63).
Where can I download the machine’s driver?
• Turn the product off and on again.
• Check the meanings of LED indications in this manual and
troubleshoot accordingly (see "Understanding the status LED"
on page 94).
• You can get help, support application, machine drivers,
manuals, and order information from the Samsung website,
www.samsung.com > find your product > Support or
Downloads.
About this user’s guide
This user's guide provides information for your basic understanding of the
machine as well as detailed steps to explain machine usage.
• Read the safety information before using the machine.
• If you have a problem using the machine, refer to the troubleshooting
chapter.
• Terms used in this user’s guide are explained in the glossary chapter.
• All illustrations in this user’s guide may differ from your machine depending
on its options or model you purchased.
• The screenshots in this user’s guide may differ from your machine
depending on the machine’s firmware/driver version.
• The procedures in this user’s guide are mainly based on Windows 7.
1
Conventions
2
General icons
Icon Text Description
Gives users information to protect the machine from
Caution
Warning
Note
possible mechanical damage or malfunction.
Used to alert users to the possibility of personal injury.
Provides additional information or detailed
specification of the machine function and feature.
Some terms in this guide are used interchangeably, as below:
• Document is synonymous with original.
• Paper is synonymous with media, or print media.
• Machine refers to printer or MFP.
1. Introduction
10
Safety information
These warnings and precautions are included to prevent injury to you and
others, and to prevent any potential damage to your machine. Be sure to read
and understand all of these instructions before using the machine. After reading
this section, keep it in a safe place for future reference.
3
Important safety symbols
Explanation of all icons and signs used in this chapter
Warning
Caution
Hazards or unsafe practices that may result in severe
personal injury or death.
Hazards or unsafe practices that may result in minor
personal injury or property damage.
4
Operating environment
Warning
Do not use if the power cord is damaged or if the electrical outlet is
not grounded.
This could result in electric shock or fire.
Do not place anything on top of the machine (water, small metal or
heavy objects, candles, lit cigarettes, etc.).
This could result in electric shock or fire.
• If the machine gets overheated, it releases smoke, makes strange
noises, or generates an odd odor, immediately turn off the power
switch and unplug the machine.
Do not attempt.
• The user should be able to access the power outlet in case of
emergencies that might require the user to pull the plug out.
This could result in electric shock or fire.
Do not bend, or place heavy objects on the power cord.
Stepping on or allowing the power cord to be crushed by a heavy
object could result in electric shock or fire.
Do not remove the plug by pulling on the cord; do not handle the
plug with wet hands.
This could result in electric shock or fire.
1. Introduction
11
Safety information
5
Caution
During an electrical storm or for a period of non-operation,
remove the power plug from the electrical outlet.
This could result in electric shock or fire.
Be careful, the paper output area is hot.
Burns could occur.
If the machine has been dropped, or if the cabinet appears
damaged, unplug the machine from all interface connections and
request assistance from qualified service personnel.
Otherwise, this could result in electric shock or fire.
If the machine does not operate properly after these instructions
have been followed, unplug the machine from all interface
connections and request assistance from qualified service
personnel.
Otherwise, this could result in electric shock or fire.
Operating method
Caution
Do not forcefully pull the paper out during printing.
It can cause damage to the machine.
Be careful not to put your hand between the machine and paper
tray.
You may get injured.
Be careful when replacing paper or removing jammed paper.
New paper has sharp edges and can cause painful cuts.
When printing large quantities, the bottom part of the paper
output area may get hot. Do not allow children to touch.
If the plug does not easily enter the electrical outlet, do not
attempt to force it in.
Call an electrician to change the electrical outlet, or this could
result in electric shock.
Do not allow pets to chew on the AC power, telephone or PC
interface cords.
This could result in electric shock or fire and/or injury to your pet.
Burns can occur.
When removing jammed paper, do not use tweezers or sharp metal
objects.
It can damage the machine.
Do not allow too many papers to stack up in the paper output tray.
It can damage the machine.
1. Introduction
12
Safety information
Do not block or push objects into the ventilation opening.
This could result in elevated component temperatures which can
cause damage or fire.
Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation
exposure.
This machine's power reception device is the power cord.
To switch off the power supply, remove the power cord from the
electrical outlet.
6
Installation / Moving
Warning
Do not place the machine in an area with dust, humidity, or water
leaks.
This could result in electric shock or fire.
Caution
Before moving the machine, turn the power off and disconnect all
cords. The information below are only suggestions based on the
units weight.
If you have a medical condition that prevents you from lifting, do
not lift the machine. Ask for help, and always use the appropriate
amount of people to lift the device safety.
Then lift the machine:
• If the machine weighs under 20 kg (44.09 lbs), lift with 1 person.
• If the machine weighs 20 kg (44.09 lbs) - 40kg (88.18 lbs), lift
with 2 people.
• If the machine weighs more than 40 kg (88.18 lbs), lift with 4 or
more people.
The machine could fall, causing injury or machine damage.
Choose a flat surface with enough space for ventilation to place
the machine. Also consider the space required to open the cover
and trays.
The place should be well-ventilated and be far from direct light,
heat, and humidity.
Place the machine in the environment where it meets the
operating temperature and humidity specification.
Otherwise, quality problems can occur and cause damage to the
machine.
See "General specifications" on page 104.
When using the machine for a long period of time or printing a
large number of pages in a non-ventilated space, it could pollute
the air and be harmful to your health. Place the machine in a wellventilated space or open a window to circulate the air periodically.
1. Introduction
13
Safety information
Do not place the machine on an unstable surface.
The machine could fall, causing injury or machine damage.
a
Use only No.26 AWG
or larger, telephone line cord, if necessary.
7
Maintenance / Checking
Otherwise, it can cause damage to the machine.
Make sure you plug the power cord into a grounded electrical
outlet.
Otherwise, this could result in electric shock or fire.
Use the power cord supplied with your machine for safe
operation. If you are using a cord which is longer than 2 meters (6
feet) with a 110V machine, then the gauge should be 16 AWG or
larger.
Otherwise, it can cause damage to the machine, and could result
in electric shock or fire.
Do not put a cover over the machine or place it in an airtight
location, such as a closet.
If the machine is not well-ventilated, this could result in fire.
Do not overload wall outlets and extension cords.
This can diminish performance, and could result in electric shock
or fire.
The machine should be connected to
Caution
Unplug this product from the wall outlet before cleaning the
inside of the machine. Do not clean the machine with benzene,
paint thinner or alcohol; do not spray water directly into the
machine.
This could result in electric shock or fire.
When you are working inside the machine replacing supplies or
cleaning the inside, do not operate the machine.
You could get injured.
Keep cleaning supplies away from children.
Children could get hurt.
Do not disassemble, repair or rebuild the machine by yourself.
It can damage the machine. Call a certified technician when the
machine needs repairing.
the power level which is specified on the label.
If you are unsure and want to check the power level you are using,
contact the electrical utility company.
a. AWG: American Wire Gauge
To clean and operate the machine, strictly follow the user's guide
provided with the machine.
Otherwise, you could damage the machine.
1. Introduction
14
Safety information
8
Supply usage
Caution
Keep the power cable and the contact surface of the plug clean
from dust or water.
Otherwise, this could result in electric shock or fire.
• Do not remove any covers or guards that are fastened with
screws.
• Fuser units should only be repaired by a certified service
technician. Repair by non-certified technicians could result in
fire or electric shock.
• The machine should only be repaired by a Samsung service
technician.
When storing supplies such as toner cartridges, keep them away
from children.
Toner dust can be dangerous if inhaled or ingested.
Using recycled supplies, such as toner, can cause damage to the
machine.
In case of damage due to the use of recycled supplies, a service
fee will be charged.
For supplies that contain toner dust (toner cartridge, waste toner
bottle, imaging unit, etc.) follow the instructions below.
• When disposing of the supplies, follow the instructions for
disposal. Refer to the reseller for disposal instructions.
• Do not wash the supplies.
• For a waste toner bottle, do not reuse it after emptying the
bottle.
If you do not follow the instructions above, it may cause machine
malfunction and environmental pollution. The warranty does not
cover damages caused by a user's carelessness.
Do not disassemble the toner cartridge.
Toner dust can be dangerous if inhaled or ingested.
Do not burn any of the supplies such as toner cartridge or fuser
unit.
This could cause an explosion or uncontrollable fire.
When toner gets on your clothing, do not use hot water to wash
it.
Hot water sets toner into fabric. Use cold water.
When changing the toner cartridge or removing jammed paper,
be careful not to let toner dust touch your body or clothes.
Toner dust can be dangerous if inhaled or ingested.
1. Introduction
15
Machine overview
9
Components
The actual component may differ from the illustration below. Some components may change depending on the circumstances.
Machine Quick installation guide
Power cord
Misc. accessories
a. The software CD contains the print drivers, user’s guide, and software applications.
b. Miscellaneous accessories included with your machine may vary by country of purchase and specific model.
b
Software CD
a
1. Introduction
16
Machine overview
1 2
3
4
5
6
7
11
8
9
10
12
13
10
Front view
• This illustration may differ from your machine depending on your model.
There are various types of machine.
• Some features and optional goods may not be available depending on
model or country (see "Features by models" on page 7).
5 Tray 1 12 Manual feeder
6 Front cover 13
NFC (Near Field Communication) tag
7
Front cover release button
a
CLP-41x series/C181x series
1 Output support 8 Toner cartridges
2 Output tray 9 Toner cartridge handle
3 Control panel 10 Intermediate Transfer Belt (ITB)
4 Control board cover 11 Paper width guides on a manual feeder
a. C181xW only.
1. Introduction
17
Machine overview
CLP-68x series
1
2
11
10
9
8
7
6
5
12
13
3
14
4
15
16
1 Output support 9 Multi-purpose tray
2 Output tray 10 Front cover
3 Control panel 11 Front cover release button
4 Control board cover 12 Toner cartridges
5 USB memory port 13 Toner cartridge handle
6
Optional tray
7
Tray 1
a
14
Intermediate Transfer Belt (ITB)
15 Paper width guides on a multi-
purpose tray
8 Push-release of Multi-purpose tray 16 Multi-purpose support tray
a. This is an optional feature.
1. Introduction
18
Machine overview
2
3
6
7
8
1
4
5
11
Rear view
• This illustration may differ from your machine depending on your model. There are various types of machine.
• Some features and optional goods may not be available depending on model or country (see "Features by models" on page 7).
CLP-41x series/C181x series CLP-68x series
7
6
1
3
5
1 Waster toner container 5 Power-switch
2
Rear cover
3 Rear cover handle 7 Network port
4
Power receptacle
4
2
6
USB port
8
5V output port for IEEE 1284B parallel connector
a. The optional IEEE 1284B parallel connector can be used by plugging in both the USB port and the 5V output port.
b. This is an optional feature. CLP-68x series only.
a
a b
1. Introduction
19
Control panel overview
2
8
9
10
4
7
6
5
11
3
1
3
4
7
8
9
11
12
10
6
5
2
1
• This control panel may differ from your machine depending on its model.
There are various types of control panels.
• Some features and optional goods may not be available depending on
model or country (see "Features by models" on page 7).
2
Toner
colors
Show the status of each toner cartridge. If the toner
cartridge is low or needs to be replaced, the Status
LED turns red and the display shows the message.
However the arrow mark shows which color toner is
of concern or may be installed with a new cartridge
(see "Toner-related messages" on page 99).
CLP-41x series/C181x series CLP-68x series
1
Display screen
Shows the current status and prompts during an
operation.
Enters menu mode and scrolls through the
3 Menu
available menus (see "Accessing the menu" on
page 27).
4 Arrow
Navigates available values by moving to the next or
previous options.
5 OK Confirms the selection on the screen.
6 Back
Sends you back to the upper menu level.
Stops current operation.
7 Cancel
You can turn the power on and off with this button.
8 Power
Or wake up from the power save mode.
Indicates the status of your machine (see
"Understanding the status LED" on page 94).
9 LED
a
Indicates the wireless status of your machine (see
"Understanding the status LED" on page 94).
1. Introduction
20
Control panel overview
Configures the wireless network connection easily
10
WPS
a
without a computer (see "Using the WPS button" on
page 156).
Demo
page
11 Eco
Numeric keypad Use the keypad to enter numbers and characters
12
a. CLP-41xNW/CLP-68xDW/C181xW only.
Prints a demo page by pressing this button.
Turn on eco mode to reduce toner consumption
and paper usage (see "Eco printing" on page 47).
(see "Keypad letters and numbers" on page 225).
1. Introduction
21
Turning on the machine
Connect the machine to the electricity supply first.
1
Turn the switch on if the machine has a power switch.
2
1
Illustrations on this user’s guide may differ from your machine depending
on its options or models. Check your machine type (see "Front view" on
page 17).
Power is turned on automatically.
2
If you want to turn the power off, press the (Power) button.
1. Introduction
22
Installing the driver locally
A locally connected machine is a machine directly attached to your computer
using the cable. If your machine is attached to a network, skip the following
steps below and go on to installing a network connected machine’s driver (see
"Installing driver over the network" on page 141).
• If you are a Mac, Linux, or UNIX operating systems user, refer to the
"Installation for Mac" on page 132, "Installation for Linux" on page 134, or
"Installing the UNIX printer driver package" on page 147.
• The installation window in this User’s Guide may differ depending on the
machine and interface in use.
• Only use a USB cable no longer than 3 meters (118 inches).
12
Windows
If the installation window does not appear, click Start > All programs >
Accessories > Run.
X:\Setup.exe replacing “X” with the letter, which represents your CDROM drive and click OK.
• For Windows 8,
If the installation window does not appear, from Charms, select
Search > Apps and search for Run. Type in X:\Setup.exe, replacing
“X” with the letter that represents your CD-ROM drive and click OK.
If “Tap to choose what happens with this disc.” pop-up window
appears, click the window and select Run Setup.exe.
Review and accept the installation agreements in the installation
3
window. Then, click Next.
Select USB connection on the Printer Connection Type screen. Then,
4
click Next.
Make sure that the machine is connected to your computer and
1
powered on.
Insert the supplied software CD into your CD-ROM drive.
2
Follow the instructions in the installation window.
5
You can select the software applications in the Select Software to Install
Window.
1. Introduction
23
Installing the driver locally
From the Windows 8 Start Screen
• The V4 driver is automatically downloaded from the Windows Update if
your computer is connected to the Internet. If not, you can manually
download the V4 driver from Samsung website, www.samsung.com >
find your product > Support or downloads.
• You can download Samsung Printer Experience app from the Windows
Store. You need have a Microsoft account to use the Windows Store.
1 From Charms, select Search.
2 Click Store.
3 Search and click Samsung Printer Experience.
4 Click Install.
• If you install the driver using the supplied software CD, V4 driver is not
installed. If you want to use the V4 driver in the Desktop screen, you can
download from the Samsung website, www.samsung.com >find your
product > Support or downloads.
• If you want to install Samsung’s printer management tools, you need to
install them using the supplied software CD.
Make sure that your computer is connected to the Internet and powered
1
on.
Make sure that the machine is powered on.
2
Connect the computer and the machine with a USB cable.
3
The driver is automatically installed from the Windows Update.
1. Introduction
24
Reinstalling the driver
If the printer driver does not work properly, follow the steps below to reinstall
the driver.
13
Windows
Make sure that the machine is connected to your computer and
1
powered on.
From the Start menu, select Programs or All Programs > Samsung
2
Printers > Uninstall Samsung Printer Software.
• For Windows 8,
1 From Charms, select Search > Apps.
2 Search and click Control Panel.
3 Click Programs and Features.
4 Right-click the driver you want to uninstall and select Uninstall.
5 Follow the instructions in the window.
From the Windows 8 Start Screen
Make sure that the machine is connected to your computer and
1
powered on.
Click on the Uninstall Samsung Printer Software tile in the Start
2
screen.
Follow the instructions in the window.
3
• If you cannot find a Samsung Printer Software tile, uninstall from the
desktop screen mode.
• If you want to uninstall Samsung’s printer management tools, from the
Start screen, right-click the app > Uninstall > right-click the program
you want to delete > Uninstall and follow the instruction in the window.
Follow the instructions in the installation window.
3
Insert the software CD into your CD-ROM drive and install the driver
4
again (see "Installing the driver locally" on page 23).
1. Introduction
25
2. Menu Overview and Basic Setup
This chapter provides information about the overall menu structure and the basic setup options.
• Menu overview 27
• Machine’s basic settings 30
• Media and tray 32
• Basic printing 44
• Using USB memory device 50
Menu overview
The control panel provides access to various menus to set up the machine or use the machine’s functions.
• Some menus may not appear on the display depending on options or models. If so, it is not applicable to your machine.
• Some menu names may differ from your machine depending on its options or the models.
• The menus are described in the Advanced Guide (see "Useful Setting Menus" on page 206).
1
Accessing the menu
Press (Menu) button on the control panel.
1
Press the arrows until the needed menu item appears and press OK.
2
If the setting item has sub menus, repeat step 2.
3
Press OK to save the selection.
4
Press (Cancel) to return to the ready mode.
5
2. Menu Overview and Basic Setup
27
Menu overview
Information
(see "Information" on page 208)
Menu Map
Configuration
Supplies Info.
Demo Page
PCL Font List
PS Font List
Usage Counter
Account
a
Layout
(see "Layout" on page 209)
Orientation
Portrait
Landscape
Margin
Common Margin
Manual Feeder
MP Tray
c
b
Tray 1
Tray 2
d
Emulation Mar.
Duplex
c
Off
Long Edge
Short Edge
Paper
(see "Paper" on page 211)
Copies
Manual Feeder
b
Paper Size
Paper Type
MP Tray
c
Paper Size
Paper Type
Tray 1
Paper Size
Paper Type
Paper Source
Auto
Tray 1
Tray 2
MP Tray
d
c
Manual Feeder
Graphic
(see "Graphic" on page 212)
Resolution
Normal
Best
Clear Text
Off
Minimum
Date & Time
Clock Mode
Language
Power Save
Wakeup Event
Job Timeout
(see "System Setup" on page 213)
Normal
Maximum
Edge Enhance
Off
Normal
Maximum
Trapping
Off
Medium
Maximum
Screen
b
Normal
Enhanced
Import Setting
Export Setting
Altitude Adj.
Normal
High 1
High 2
High 3
Humidity
Normal
High 1
High 2
High 3
System Setup
Auto Continue
Auto CR
Auto Tray Swi.
Paper Substit.
Tray Protect
Skip BlankPage
c
Maintenance
c
Eco Setup
Vapor Mode
Auto Power Off
c
c
CLR Empty Msg.
Supplies Life
TonerLow Alert
Paper Stacking
Ram Disk
c
Default Mode
Change Temp.
e
Detailed
a. This is used only available when Job Accounting is enabled from the SyncThru™ Web Admin Service.
b. CLP-41x series/C181x series only.
c. CLP-68x series only.
d. This is an optional feature. CLP-68x series only.
e. This option only appears when small amount of toner is left in the cartridge.
2. Menu Overview and Basic Setup
28
Menu overview
Emulation
(see "Emulation" on
page 217)
(see "Image Mgr." on page
Image Mgr.
218)
Network
(see "Network" on page 219)
Direct USB
a
(see "Direct USB" on
page 221)
Job Manage
b
(see "Job Manage" on page
222)
Emulation Type
Setup
Custom Color
Default
Print Density
Auto Color Reg
Tone Adjust.
Default
Auto Tone Adj.
Cal. ID Sensor
TCP/IP (IPv4)
DHCP
BOOTP
Static
TCP/IP (IPv6)
IPv6 Activate
DHCPv6 Config
Ethernet Speed
Automatic
10Mbps Half
10Mbps Full
100Mbps Half
100Mbps Full
1Gbps Full
802.1x
Wireless
c
Wi-Fi Direct
On/Off
Device Name
IP Address
Group
Owner
Network Key
Status
WPS Setting
PBC
PIN
WLAN
Setting
d
Wizard
Custom
WLAN
Default
WLAN Signal
Excellent
Very Good
Good
Low
Very Low
No Signal
Clear Settings
Network Conf.
Net. Activate
Http Activate
WINS
SNMP V1/V2
SNTP
UPnP(SSDP)
MDNS
SetIP
SLP
USB Print
File Manage
Check Space
Active Job
Secured Job
Stored Job
Print
Delete
File Policy
Rename
Overwrite
Wi-Fi ON/OFF
a. CLP-68x series only. This option is available When USB memory is inserted into the USB memory port on your machine.
b. CLP-68x series only. This option is available when the optional memory installed or Ram disk is checked.
c. CLP-41xNW/CLP-68xDW/C181xW only.
d. CLP-68xDW only.
2. Menu Overview and Basic Setup
29
Machine’s basic settings
You can set the machine’s settings by using the Device Settings in
Samsung Easy Printer Manager program.
• For Windows and Mac users, you set from Samsung Easy Printer
Manager > (Switch to advanced mode) > Device Settings, see
"Device Settings" on page 258.
After installation is complete, you may want to set the machine's default
settings.
To change the machine’s default settings, follow these steps:
It may be necessary to press OK to navigate to lower-level menus for some
models.
Select (Menu) button on the control panel.
1
Enter the correct time and date using arrows or numeric keypad (see
"Keypad letters and numbers" on page 225).
• Month = 01 to 12
• Day = 01 to 31
• Year = requires four digits
• Hour = 01 to 12
• Minute = 00 to 59
• Clock Mode: You can set your machine to display the current time
using either a 12-hour or 24-hour format.
• Power Save: When you are not using the machine for a while, use
this feature to save power.
• When you press the power button or start printing, the product will wake
up from the power saving mode.
• When you press any button except power button, the machine wake up
Press System Setup.
2
Select the option you want, then press OK.
3
• Language: Change the language that is displayed on the control
panel.
• Date & Time: You can set the time and date. They are printed on
reports. If, however, they are not correct, you need to change it for
the correct time being.
from the power save mode. Press
(Menu) > System Setup >
Wakeup Event > On on the control panel.
• Altitude Adj.: Print quality is affected by atmospheric pressure,
which atmospheric pressure is determined by the height of the
machine above sea level. Before you set the altitude value,
determine the altitude where you are (see "Altitude adjustment" on
page 224).
2. Menu Overview and Basic Setup
30
Loading...