Salter Brecknell GP100, GP250 User Manual

Salter Brecknell Weighing Products

1000 Armstrong Dr

Fairmont, Minnesota 56031

Toll Free 800-637-0529 · Voice 507-238-8702 · Fax [phone]

Email: [e-mail]

www.salterbrecknell.com

January 2004

©Copyright 2001- 2004 Salter Brecknell Weighing Products

Models GP100 / GP250

Electronic General Purpose Bench Scale

User Manual

UNPACKING YOUR SCALE

Carefully unpack and inspect the shipping container for evidence of shipping
damage. If such evidence is discovered, stop unpacking and immediately notify the
shipper to arrange to have the shipment inspected by an authorized representative.
All damages must be promptly filed with the shipper.

1. Open the box and carefully remove the scale from the shipping carton (save the
shipping carton for future use).

2. Place the scale on a flat level surface free from vibration.

3. Remove the AC adapter and user manual from the packaging material.

INSTALLING THE BATTERY

Use 9V ALKALINE BATTERY ONLY
No other type provides a suitable power output.

To fit the battery, remove the cover on the underside
of the scale and place the battery firmly into the
battery holder (a). Connect the terminals to the battery and
refit the cover (b).

1

MODELS GP100/ GP250 TECHNICAL SPECIFICATIONS

Construction: 22 gauge steel

Capacity: GP100: 0 – 100 x 0.2 lbs / 0 – 45 x 0.1 kg

GP250: 0 – 250 x 0.5 lbs / 0 – 110 x 0.2 kg

Accuracy: +/- 3 divisions: GP100 - 0.6 lbs / 0.3 kg)

GP250 – 1.5 lbs / 0.6 kg

Display: Large 1” High Backlit LCD

Platter Size: 10.95”W x 12.50”L x 2.20” H

Keypad: Discrete keyboard switch with ZERO/ ON/OFF, UNITS, TARE, and

HOLD.

Power Supply: 120 VAC, 60Hz Ac, 9V DC adapter with 6’ power cord or one 9 volt

battery (battery not included)

Battery Life: Up to 8 hours, when Auto Power off is enabled.

CLEANING AND CARE

1. Handle the scale with care. Dropping the scale may cause damage to the scale,
which will not allow the scale to weigh properly. This type of damage is
considered abuse and violates the product warranty.

2. To avoid damage to the scale, never drop heavy objects or exceed 400 lbs or
200 kg of weight on the scale.

3. Clean the scale with a slightly damp cloth. DO NOT immerse the scale in water
or use chemical/abrasive-cleaning agents.

4. If the scale is not being used for a long period of time, remove the battery or turn
off the scale.

WARRANTY

This product has a 1 year warranty from the date of delivery against defects in
material and workmanship. This warranty does not apply if the product was subject
to misuse, neglect, damage or abuse. Calibration is not covered under warranty

10

a

b