
DE
4a
4b
EINFüHRUNG
Wichtig: Lesen Sie diese Gebrauchsanleitung aufmerksam durch, um sich mit dem
7a
1a
1
3
!
2
Gerät vertraut zu machen, bevor Sie den Gasbehälter anschließen. Bewahren Sie dieses
Dokument für späteres Nachlesen sorgfältig auf. Bei einem Besitzerwechsel muss die
Anleitung mit ausgehändigt werden.
ZEICHENERKLÄRUNG
= Nur im Freien
verwenden
= Achtung, heiße
Teile
= Bedienungs-
anleitung lesen
= Von Kindern
fernhalten
TECHNISCHE DATEN - ROTEMP M 1000
Gerätekategorie / Gasart:
Direktdruck Butan-Propan-Gemisch
Dieses Gerät darf ausschließlich mit Kartuschen
5
6
Gasbehälter:
vom Typ „ROTHENBERGER Multigas 300“
betrieben werden. Es kann gefährlich sein,
zu versuchen, andersartige Gasbehälter
anzuschließen.
Nennleistung:
Düsendurchmesser:
7a
8
7
TEILEBEZEICHNUNG
0359
1. Geräteventil
1a. Dichtung
10 – 15
sec.
8a
2. Sichtlöcher
3. Gaseinstellknopf
= AUS
= Niedrige Heizstufe
= Hohe Heizstufe,
8
5 – 10
X
CLICK
Zündposition
1,0 kW / 72 g/h
0,22 mm
NUR IM FREIEN VERWENDEN
4. Piezo-Zündung
4a. Zündknopf
4b. Zündmechanismus
5. Gitter
6. Katalytmatte
7. Ständer
7a. Befestigungsschrauben
8. Rothenberger “Multigas 300”
Butan-Propan Gaskartusche
(nicht bei allen Verkaufsvarianten im
Lieferumfang enthalten)
8a. Kartuschenventil
Hiermit erklären wir, dass das nachfolgend bezeichnete Gerät aufgrund seiner Konzipierung
und Bauart sowie in der von uns in Verkehr gebrachten Ausführung, den einschlägigen,
grundlegenden Sicherheits- und Gesundheitsanforderungen der EG-Richtlinien entspricht.
Diese Erklärung bezieht sich nur auf das Gerät in dem Zustand, in dem es in Verkehr
gebracht wurde. Vom Endbenutzer nachträglich angebrachte Teile und/oder nachträglich
vorgenommene Eingriffe bleiben unberücksichtigt.
We declare that the design and construction of the following machine, in the form supplied
by us, comply with the basic health and safety requirements of the appropriate EC directives.
This declaration covers the machine only in the condition in which it was supplied by us. It
does not cover parts subsequently fitted by the user or modifications made after purchase.
Nous, déclarons que la machine décrite ci-après correspond, dans le cadre de sa conception
et de son type de construction, ainsi que le modèle que nous avons introduit sur le marché,
aux exigences adaptées de base de sécurité et sanitaires des directives CE. Cette déclaration
ne concerne qu’une machine se trouvant dans le même état que lors de sa mise en service.
L’ajout ultérieur d’accessoires et / ou les interventions effectuées ne sont pas pris en compte.
л М‡ТЪУfl˘УЪУ ‰ВНО‡Л‡ПВ, ˜В ‰УОЫУФЛТ‡МЛflЪ ЫВ‰ ‚˙Б УТМУ‚‡ М‡ МВ„У‚‡Ъ‡
НУМˆВФˆЛfl Л НУМТЪЫНˆЛfl, Н‡НЪУ Л М‡ ФЫТМ‡ЪУЪУ УЪ М‡Т ‚ ЫФУЪВ·‡ ЛБФ˙ОМВМЛВ,
УЪ„У‚‡fl М‡ Т˙УЪ‚ВЪМЛЪВ УТМУ‚МЛ ЛБЛТН‚‡МЛfl Б‡ ·ВБУФ‡ТМУТЪ Л Б‰‡‚В М‡
‰ЛВНЪЛ‚ЛЪВ М‡ Цй. з‡ТЪУfl˘‡Ъ‡ ‰ВНО‡‡ˆЛfl ТВ УЪМ‡Тfl Т‡ПУ Б‡ ЫВ‰‡ ‚ Т˙ТЪУflМЛВЪУ,
‚ НУВЪУ ЪУИ В ФЫТМ‡Ъ ‚ ФУ‰‡К·‡. зВ ТВ ‚БЛП‡Ъ ФУ‰ ‚МЛП‡МЛВ ‰УФ˙ОМЛЪВОМУ
ФУТЪ‡‚ВМЛ ˜‡ТЪЛ Л/ЛОЛ ‰УФ˙ОМЛЪВОМУ ЛБ‚˙¯ВМЛ М‡ПВТЛ УЪ Н‡ИМЛfl ФУЪВ·ЛЪВО.
Tímto společnost, prohlašuje, že níže uvedené zařízení svou koncepcí a druhem konstrukce a
v provedení námi uvedeném do provozu odpovídá příslušným, základním bezpečnostním a
zdravotním ustanovením směrnic ES. Toto prohlášení se vztahuje pouze na zařízení ve stavu,
v němž bylo uvedeno do oběhu. Konečným uživatelem dodatečně umístěné díly a/nebo
dodatečně provedené zásahy nejsou zohledněny.
Hermed erklærer vi, at maskinen, der er beskrevet herunder, på grundlag af koncept
og konstruktion såvel som i vores udførelse overholder de relevante grundlæggende
sikkerheds- og sundhedsbestemmelser i EF-direktiverne. Denne erklæring gælder kun
maskinen i den tilstand, hvori den er bragt i handelen. Der er ikke taget højde for dele, der er
anbragt efterfølgende og/eller indgreb foretaget efterfølgende af slutbrugeren.
Nosotros, la empresa declaramos que el aparato descrito a continuación cumple con los
requisitos de salud y de seguridad fundamentales y pertinentes de las Directivas de la CE,
en base a su concepción y tipo de construcción, así como en el modelo distribuido por
nosotros. Esta declaración hace referencia únicamente al aparato en el estado en que ha
sido comercializado. No se tienen en cuenta las piezas instaladas posteriormente y/o las
intervenciones hechas posteriormente por el usuario final.
Käesolevaga kinnitab,et nimetatud seade vastab oma disaini ja ehitustüübi ning meie
poolt turuleviidud varustuse poolest EÜ direktiivide asjakohastele ja põhilistele ohutuse
ja tervishoiu miinimumnõuetele. See deklaratsioon viitab ainult seadme seisundile sellisel
kujul, nagu see turule viidi. See ei kehti hiljem lõppkasutaja paigaldatud lisaosade ja/või
tehtud muudatuste puhul.
Täten vakuutamme, että seuraavassa kuvattu laite vastaa sekä suunnittelunsa ja rakenteensa
että meidän kaupassamme aikaansaadun toteutuksen puolesta asianomaisia EY-direktiivien
perustavanlaatuisia turvallisuus- ja terveysvaatimuksia. Tämä todistus viittaa vain laitteeseen,
joka on sellaisessa kunnossa kuin kaupankäyntiin toimitettuna. Lopullisen käyttäjän
myöhemmin tuomia osia ja/tai myöhemmin suorittamia asennuksia ei oteta huomioon.
Με το παρόν δηλώνουμε εμείς, η εταιρεία, ότι η ακολούθως περιγραφόμενη συσκευή, με
βάση το σχεδιασμό και το είδος κατασκευής της, και στην έκδοση που κυκλοφόρησε από
την εταιρεία μας, ανταποκρίνεται στις σχετικές, βασικές απαιτήσεις ασφαλείας και υγείας
της Οδηγίας της Ε.Κ. Αυτή η δήλωση αναφέρεται μόνο στη συσκευή και στην κατάσταση
στην οποία κυκλοφόρησε. Δεν λαμβάνονται υπόψη μετέπειτα τοποθετημένα μέρη και/ή
μετέπειτα διεξαχθείσες επεμβάσεις από τον τελικό χρήστη.
Ezennel kijelentjük, hogy a(z) hogy az alábbiakban megnevezett készülék kialakítása és
szerkezete alapján, valamint az általunk forgalomba hozott kivitelben megfelel az EK-irányelvek
vonatkozó biztonsági és egészségügyi rendelkezéseinek. Ez a nyilatkozat csak az olyan állapotú
készülékre vonatkozik, amelyikben forgalomba lett hozva. A végfelhasználó révén utólag
felszerelt alkatrészek és/vagy utólag eszközölt beavatkozások figyelmen kívül maradnak.
Ovime izjavljujemo, da stroj opisan u nastavku, na temelju svoje koncepcije i oblika te
izvedbe stavljene u opticaj, ispunjava važeće odredbe direktiva EZ koje se odnose na
sigurnosne i zdravstvene zahtjeve. Ova izjava odnosi se samo na stroj u stanju u kojem
je stavljen u opticaj. Ona se ne odnosi na komponente koje je dodao krajnji korisnik i / ili
naknadno poduzete intervencije.
Produktbezeichnung / Funktion: Kartuschengasheizstrahler
Typen- / Modellbezeichnung: M 1000
Seriennummer/Chargennummer: 11-453-1 – 2014-07
Handelsbezeichnung: ROTHENBERGER INDUSTRIAL Kartuschengasheizstrahler
Einschlägige EG-Richtlinien: Gas Appliances Directive 2009/142/EEC
Angewandte harmonisierte Normen: EN 521:2006
Ben Shields Mag. Bart Duquène
Leitung Produktmanagement Senior Product Manager
und Bevollmächtigter der
Technischen Dokumentation
EG-Konformitäts erklärung
WALTER WERKZEUGE SALZBURG GmbH, Gewerbeparkstrasse 9, 5081 Anif, Austria
Con la presente, noi, dichiariamo che l’apparecchio di seguito indicato è conforme, per
concezione e struttura costruttiva, nonché nella versione messa in circolazione, ai requisiti
di sicurezza e sanitari basilari pertinenti stabiliti nelle direttive CE. Questa dichiarazione si
riferisce solo alle condizioni alle quali l’apparecchio è stato messo in circolazione Non sono
contemplate le parti applicate successivamente dell’utente finale e/o gli interventi eseguiti
in un momento successivo.
Šiuo dokumentu mes, kad toliau aprašyto prietaiso koncepcija, konstrukcija ir prekybai
tiekiamas modelis atitinka taikomus svarbiausius EB direktyvų saugos ir sveikatos
reikalavimus. Ši deklaracija galioja tik tokios konfigūracijos prietaisui, kurios tiekiamas
prekybai. Vėliau galutinio naudotojo pridėtos dalys ir (ar) atlikti pakeitimai į ją neįeina.
Ar šo apliecinām, ka turpmāk norādītā ierīce pamatojoties uz tās izstrādi un būvēšanas veidu,
kā arī no mums apgrozībā laistais veids, atbilst attiecīgajām, būtiskajām drošības un veselības
aizsardzības prasībām, kas noteiktas EK direktīvās. Šis apliecinājums attiecas tikai uz ierīci
stāvoklī, kāda tā tika laista apgrozībā. Lietotāja papildus pieliktas detaļas un/vai papildus
veiktas modifikācijas netiek ievērotas.
Med dette erklærer vi, at etterfølgende betegnede apparat på grunn av sin design og
konstruksjon samt den utformingen som vi har brakt i omsetning, oppfyller de relevante,
grunnliggende sikkerhets- og helsekravene i EU-direktivet. Denne erklæringen referer
bare til apparatet i den tilstand det er brakt i omsetning. Deler som i ettertid er montert av
sluttbruker og/eller inngrep som er foretatt i ettertid blir ikke tatt hensyn til.
Hiermee verklaren wij, dat het design en de constructie van het hieronder genoemde
toestel, zoals door ons geleverd, voldoet aan de eisen van de toepasselijke, fundamentele
veiligheids- en gezondheidsvereisten van de EG-richtlijnen. Deze verklaring heeft uitsluitend
betrekking op het toestel in de toestand waarin het geleverd werd. Delen die door de
eindgebruiker nadien zijn aangebracht en/of ingrepen die nadien zijn uitgevoerd, worden
niet in acht genomen.
Por este meio declaramos, que o aparelho seguidamente designado está em conformidade
com o disposto nas directivas europeias de saúde e segurança no que se refere ao desenho
e tipo de fabrico, bem como à versão por nós comercializada. Esta declaração refere-se
apenas ao aparelho no estado em que foi comercializado. Não inclui peças colocadas
posteriormente pelo utilizador final e/ou intervenções realizadas posteriormente.
Niniejszym my deklarujemy, że niżej wyspecyfikowane urządzenie pod względem kontrukcji
i rodzaju jak też wersji wprowadzonej przez nas do obrotu spełnia obowiązujące wymagania
dyrektyw WE dotyczące projektu i konstrukcji. To oświadczenie odnosi się tylko do maszyny
w stanie, w jakim została wprowadzona do obrotu. Nie są uwzględnione części zamocowane
następnie przez końcowego użytkownika i/lub przeprowadzone przez niego ingerencje.
Noi declarăm că acest aparat a fost proiectat şi fabricat în conformitate cu normele UE de
siguranţă şi protecţie a sănătăţii utilizatorului. Această declaraţie se referă numai la aparatele
vândute de distribuitori autorizaţi. Nu ne asumăm nicio responsabilitate în cazul în care
utilizatorul a efectuat operaţiuni neautorizate.
з‡ТЪУfl˘ЛП П˚ Б‡fl‚ОflВП, ˜ЪУ ЫН‡Б‡ММ˚И МЛКВ ФЛ·У М‡ УТМУ‚‡МЛЛ В„У
ФУВНЪЛУ‚‡МЛfl Л НУМТЪЫНˆЛЛ, ‡ Ъ‡НКВ М‡ УТМУ‚‡МЛЛ ФЛМflЪУ„У Ы М‡Т
ФУˆВТТ‡ ЛБ„УЪУ‚ОВМЛfl ТУУЪ‚ВЪТЪ‚ЫВЪ ЛПВ˛˘ЛП Н МВПЫ УЪМУ¯ВМЛВ УТМУ‚М˚П
ЪВ·У‚‡МЛflП ‰ЛВНЪЛ‚ Цл ФУ ·ВБУФ‡ТМУТЪЛ Л Уı‡МВ Б‰УУ‚¸fl. з‡ТЪУfl˘ВВ
Б‡fl‚ОВМЛВ УЪМУТЛЪТfl ЪУО¸НУ Н ФЛ·УЫ ‚ ЪУП ТУТЪУflМЛЛ, ‚ Н‡НУП УМ ФВВ‰‡МУ
‚ ФУˆВТТ ЛБ„УЪУ‚ОВМЛfl. СВЪ‡ОЛ, ‰УФУОМЛЪВО¸МУ ЫТЪ‡М‡‚ОЛ‚‡ВП˚В НУМВ˜М˚П
ФУО¸БУ‚‡ЪВОВП, Л/ЛОЛ ФУТОВ‰Ы˛˘‡fl ПУ‰ВМЛБ‡ˆЛfl МВ Ы˜ЛЪ˚‚‡˛ЪТfl.
Härmed förklarar vi att den följande nämnda apparaten motsvarar de relevanta,
grundläggande säkerhets- och hälsokraven i EG-direktiven vad gäller såväl koncept och
konstruktion som utförande hos det vi har släppt ut på marknaden. Denna förklaring syftar
endast på apparaten i det tillstånd den befinner sig när den tas i drift. Av slutanvändaren i
efterhand anbringade delar och/eller i efterhand utförda ingrepp beaktas inte.
Izjavljamo da zasnova in način izdelave v nadaljevanju opisane naprave, ter različica vpeljana
na trg, ustreza zadevnim temeljnim varnostnim in zdravstvenim pogojem smernic EU. Ta
izjava se nanaša le na napravo v stanju, kot smo jo dali v prodajo. Deli in/ali naknadni posegi
končnega uporabnika se ne upoštevajo.
Aşağıda adı geçen cihazın, tasarım, yapı şekli ve tarafımızdan piyasaya arz edildiği şekli
açısından, Avrupa Birliği Yönetmelikleri‘nin geçerli temel sağlık ve güvenlik kurallarına
uygun olduğunu beyan ediyoruz. İşbu beyan, sadece piyasaya arz edildiği durumdaki cihaz
için geçerlidir. Nihai kullanıcı tarafından parçaların takılması ve/veya yapılan müdahaleler
sonucunda bu beyan geçerliliğini kaybeder.
ROTEMP M 1000
Anif, 1.7.2014
Technische Dokumentation verfügbar bei:
WALTER WERKZEUGE SALZBURG GmbH,
Gewerbeparkstrasse 9, 5081 Anif, Austria
Dies ist die Originalversion der EG-Konformitätserklärung.
43

INTRODUCTION
Important: Read these instructions carefully so as to familiarise yourself with the appliance before
connecting it to its gas cartridge. Keep these instructions for future reference. Give these instructions
GB
to any third person using the appliance.
SYMBOLS USED IN THIS MANUAL
= Use
outdoors
only
= Caution,
hot parts
= Read the operating
instructions
TECHNICAL SPECIFICATIONS – ROTEMP M 1000
Appliance category / type of gas:
Gas container:
Heat input:
Injector diameter:
0359
Direct pressure butane-propane mixture
This appliance shall only be used with a Rothenberger
“Multigas 300” butane-propane non-refillable gas
cartridge. It may be hazardous to attempt to fit other
types of gas containers.
1.0 kW / 72 g/h
0,22 mm
USE OUTDOORS ONLY
FEATURES
1. Appliance valve
1a. Seal
2. Viewing holes
3. Gas adjustment knob
= OFF
= Low setting
= High setting,
position for ignition
4. Piezo ignition:
4a. Button
4b. Spark
5. Grille
6. Catalyst pad
7. Stand
7a. Adjustment knobs / screws
8. Rothenberger “Multigas 300”
butane-propane gas cartridge
(Pack contents may vary. Not included with
all variants.)
8a. Threaded valve
= Keep out
of reach
of children
SCOPE OF USE
This appliance is designed for heating. It is not intended for indoor use and it may only be used
outside. Use of the product for any other purpose and / or modification of the product count as
misuse, can be highly dangerous and is forbidden.
10

SAFETY INSTRUCTIONS
CAUTION: RISK OF SUFFOCATION AND / OR CARBON MONOXIDE POISONING.
The appliance may only be used outdoors
- Do not touch any hot parts of the appliance. Let the device cool down fully before putting it
away.
CAUTION: Accessible parts can be very hot. Keep young children away from the appliance.
- Check that the seal between the appliance and the gas cartridge is in place and in good
condition before connecting the gas cartridge.
- Never use the appliance if it has damaged or worn seals.
- Never use the appliance if it is leaking, damaged or if it does not function properly.
- This device must be operated at a safe distance from inflammable substances. Maintain a
safe distance from inflammable materials. Keep at least 0.5 metres of distance to the sides of
and 1 metre above the appliance.
- The appliance must be used on a flat, level and stable surface.
- Do not leave the appliance unattended
- Replace the gas cartridge in at a well-ventilated place, preferably in the open and away
from all possible ignition sources such as open flames, pilot flames, electric cooking
devices and away from other persons.
- Smoking is prohibited when handling the gas cartridge.
- If there is a leak on your appliance (smell of gas), take the device outdoors immediately
to a well-ventilated location away from sources of ignition, where the leak can be safely
detected and repaired. Take the appliance outdoors before checking for leaks. Never check for
leaks using a flame; always use a soapy solution or a leak detection spray!
- If the appliance is not to be used over longer periods, keep it in a safe, cool, dry and wellventilated place out of the reach of children.
- The gas cartridge must be detached if the appliance is not to be used over longer periods,
or if it is to be transported.
- Never try to repair the appliance by yourself. If a repair is necessary, contact the
manufacturer’s customer service or a similarly qualified person.
GB
INSTALLATION / PREPARING FOR USE
CONNECTING THE HEATER TO THE STAND
Connect the heater to the stand using the 2 adjustment knobs / screws provided (7a). Use the
adjustment knobs to fix the heater in the desired angle.
CONNECTING THE APPLIANCE TO A
“MULTIGAS 300”-CARTRIDGE
This appliance shall only be used with a Rothenberger “Multigas 300” butanepropane non-refillable gas cartridge. It may be hazardous to attempt to fit other
types of gas containers.
Proceed as follows to connect the burner to a gas cartridge:
- Before connecting the gas cartridge, ensure that the seal between the device and the gas cartridge
(1a) exists and is in good condition.
11

- Ensure that the gas adjustment knob (3) is in the position 0 (OFF).
- The threads on the pressurised gas cartridge and appliance valve are right handed threads. Screw
the gas cartridge clockwise on to the appliance valve (1) until the seal is airtight. Do not use tools for
this connection.
- Ensure that the connectioning is air-tight. To do this, spray a soapy solution or a leak detection
GB
spray through the view holes (2) onto the connection between the cartridge valve (8a) and the
appliance valve (1). If bubbles appear, the device is leaking.
- If gas escapes from the system (smell of gas or formation of bubbles during the leakage test), take
the system outdoors immediately to a well-ventilated location away from sources of ignition where
the leak can be safely detected and repaired. Take the device outdoors before checking for leaks.
Never check for leaks using a flame; always use a soapy solution or a leak detection spray! Keep
the appliance under observation until the gas has escaped from it fully.
The device is now assembled.
OPERATION / USE
KEEP YOUR FACE AWAY FROM THE GRILLE WHEN IGNITING THE HEATER!
THE IGNITION MAY BEGIN WITH A DARTING FLAME.
Proceed as follows to light the appliance and adjust the flame:
- Place the appliance outdoors on a flat, level and stable surface, well away from any inflammable
materials. Pay special attention to the safety instructions above.
- Turn the gas adjustment knob (3) anticlockwise to the highest setting.
- IMPORTANT: Wait approx. 10-15 seconds, until there is a sufficient quantity of gas in the
catalyst pad. Otherwise, the heater will not ignite.
- Press the ignition button (4a) several times until you see a brief flame and hear a “plop” sound.
Continue pressing the Piezo ignition until you feel that the heater is warming up. KEEP YOUR
FACE AWAY FROM THE GRILLE!
- Note: Instead of using the Piezo ignition, you can apply a lighter or a match to the lower part of
the grille.
- The heater is now operating. CAUTION: the heater has no visible flame and the surface doesn’t
glow.
- After approx. 10 minutes, the heater is warmed up and reaches its full performance. Now you can
adjust the performance as required by turning gas adjustment knob (3).
- To switch off the appliance, turn the gas adjustment knob (3) clockwise towards position “0” (OFF).
MAINTENANCE, STORAGE AND CLEANING
REMOVING AND CHANGING THE GAS CARTRIDGE
CAUTION: Change the pressurised gas cartridge only outdoors or in wellventilated rooms!
- Shut the valve by turning the gas adjustment knob (3) clockwise towards position “0” (OFF).
- Let the appliance cool down completely for approx. 15 minutes
- Unscrew the pressurised gas cartridge from the appliance valve by turning it anti-clockwise.
- Connect the new pressurised gas cartridge to the device as described in the “Installation” section.
12

CLEANING
Clean the appliance regularly with a dry cloth. Do not use aggressive cleaning agents, solvents or
petroleum spirit. Do not dip or spray the appliance in / with water or other liquids. The appliance and
mainly its openings should be kept free of dust.
GENERAL MAINTENANCE
- The appliance requires very little maintenance.
- Regularly check the seal (1a).
- Do not modify the appliance in any way.
- If the appliance develops a fault have it repaired by a competent person or contact the
manufacturer. See the address at the back of the manual.
STORAGE AND TRANSPORT
- If the appliance is not to be used, keep it at a safe, cool, dry and well-ventilated place out of the
reach of children.
- Protect the gas cartridge from sunlight and never expose it to temperatures above 50°C.
- The gas cartridge must be detached if the appliance is not to be used over longer periods, or if it is
to be transported.
- In general, all national regulations regarding operation, transportation and storage must be followed.
TROUBLESHOOTING
Problem Possible cause Troubleshooting
GB
Appliance cannot be
switched on
Appliance extinguishes
during use
Gas knob not on highest
setting
Gas cartridge empty Replace the gas cartridge
Not sufficient gas in the
catalyst pad
Piezo ignition defective Ignite the appliance with a match or
Gas cartridge empty Replace the gas cartridge
Turn the gas adjustment knob (3)
anticlockwise to the highest setting
Continue pushing the Piezo button
repeatedly
a lighter
RECYCLING
Worn out appliances must be recycled at a suitable recycling facility. Do not dispose of with the
household waste. Contact your local authority for more information. Dispose of packaging according
to type and in accordance with local regulations.
13