Rockwell Automation 2099-BM-xxx User Manual

Quick Reference

ATTENTION

Remove Jumpers in Kinetix 7000 Drives

Catalog Numbers 2099-BM06-S, 2099-BM07-S, 2099-BM08-S, 2099-BM09-S, 2099-BM10-S, 2099-BM11-S, 2099-BM12-S

This document provides information regarding the protective metal oxide
varistors (MOVs) and common mode capacitors in the Kinetix 7000 drives.

Kinetix 7000 drives contain protective MOVs and common mode
capacitors that are referenced to ground. In a grounded power
distribution system, these devices assist in isolating the drive
from electromagnetic interference (EMI).

These devices must be disconnected if the drive is installed in:

The MOVs, capacitors, and a sticker describing this issue
the power terminal block. Refer to the Kinetix 7000 High Power Servo Drives
Installation Instructions, publication

Kinetix is a trademark of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.

• unbalanced, ungrounded, or resistive-grounded power
di

stribution systems.

• common bus configurations.

, are located within

2099-IN003, for more information.

Publication 2099-QR003A-EN-P — October 2008 328028-P02

Supersedes Publication 2099-PA001A-EN-P — Ma y 2006 Copyright © 2008 Rockwell Automation, In c. All rights reserved. Printed in the U.S.A.