Pure Jongo S3 User Manual

Thank you for choosing Jongo S3. This manual will get you up and

running in no time and explains how to make the most of your Jongo.
We’re constantly improving and adding new features to our products.
To take advantage of any enhancements made since your product was
shipped, please visit support.pure.com where you can check for any
updated versions of software and download the latest version of this
user guide in PDF format.

Jongo Safety Instructions

1. Read these instructions – All the safety and operating instructions should be read before this product is operated.

2. Keep these instructions – The safety and operating instructions should be retained for future reference.

3. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.

4. Follow all instructions – All operating and use instructions should be followed.

5. Clean only with dry cloth.

6. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

7. Only use attachments/accessories specified by the manufacturer.

8. Unplug the apparatus during lightning storms or when unused for long periods of time.

9. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, does not operate
normally, or has been dropped.

10. To reduce the risk of electric shock, do not Remove plastic cover or screws as there are no user-serviceable parts inside. Refer servicing to

qualified personnel.

11. Avoid liquids getting into Jongo. Should not be immersed in water, or used where this may happen, such as a bathroom.

12. The equipment’s ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-cloths,

curtains etc.

13. WARNING Please refer to the information on the bottom exterior of the enclosure for electrical and safety information before installing or
operating the apparatus.

14. WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed
to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus.

15. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

16. WARNING: The direct plug-in adapter is used as disconnect device, the disconnect device shall remain readily operable.

17. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a

safety connection to electrical earth.

ChargePAK F1 Safety Instructions

1. Read the instructions for ChargePAK use in this document.

2. Only use your ChargePAK with original Pure products.

3. Store ChargePAK in a cool, dry place at normal room temperature. Remove from devices that will be stored unused for extended periods.

4. Do not puncture, modify, drop, throw, or cause other unnecessary shocks to your ChargePAK. May present a risk of fire, explosion, or
chemical burn if mistreated.

5. Do not dispose of ChargePAK in a fire or incinerator, or leave in hot places such as a motor car under direct sunlight. Do not store near
oven, stove, or other heat source.

6. Do not connect ChargePAK directly to an electrical source, such as a building outlet or automobile power-point. Do not place into a
microwave oven, or any other high-pressure container.

7. Do not immerse ChargePAK in water or otherwise expose it to liquids.

8. Do not short circuit ChargePAK.

9. Do not use or charge a ChargePAK that appears to be leaking, discoloured, rusty, deformed; emitting an odour; or is otherwise abnormal.

10. Do not touch a leaking ChargePAK directly; wear protective material to remove and dispose of it properly immediately.

11. Do not store where children may have access.

12. Dispose of ChargePAK as per normal rechargeable batteries according to the local laws and regulations of your region. Some batteries
may be recycled, and may be accepted for disposal at your local recycling centre.

Warranty information

Imagination Technologies Limited warrants to the end user that this product will be free from defects in materials and workmanship in the
course of normal use for a period of two years from the date of purchase (One year for ChargePAK). This guarantee covers breakdowns due to
manufacturing or design faults; it does not apply in cases such as accidental damage, however caused, wear and tear, negligence, adjustment,
modification or repair not authorised by us. Should you have a problem with your unit please contact your supplier or contact Pure Support at
http://support.pure.com.

Disclaimer

Imagination Technologies Limited makes no representation or warranties with respect to the content of this document and specifically disclaims
any implied warranties of merchantability or fitness for any particular purpose. Further, Imagination Technologies Limited reserves the right to
revise this publication and to make changes in it from time to time without obligation of Imagination Technologies Limited to notify any person
or organization of such revisions or changes.

Trademarks

Jongo, ChargePAK, Pure, the Pure logo, Imagination Technologies, and the Imagination Technologies logo are trademarks or registered trade­marks of Imagination Technologies Limited.
Caskeid is a superior synchronization technology, providing clear multi-speaker wireless audio.
Caskeid and the Caskeid logo are trademarks or registered trademarks of Imagination Technologies.

Copyright

Copyright © 2014 Imagination Technologies Limited. All rights reserved. No part of this publication may be copied or distributed, transmitted,
transcribed, stored in a retrieval system, or translated into any human or computer language, in any form or by any means, electronic, mechan­ical, magnetic, manual or otherwise, or disclosed to third parties without the express written permission of Imagination Technologies Limited.

Acknowledgement of License Agreements

Portions of the code used in Jongo S3 are subject to the GPL, LPGL, BSD, and other open source licenses. For more details please refer to:
http://www.pure.com/licensing

2

Contents

4 Introduction

4 Front panel controls

5 Rear panel controls and connectors

5 Symbols on the rear display

6 Switching between Sleep, On and Off

6 Power light states

7 Getting started

7 Preparing Jongo to connect to a wireless network

8 Manually connecting Jongo to your wireless network

9 Streaming audio to Jongo

9 Streaming audio to Jongo using Bluetooth

9 Streaming from a smartphone or tablet

9 Streaming from a compatible Pure product

10 Changing audio profiles

12 Using Jongo Setup Manager

14 Appendix

14 Connecting Jongo to your wireless network using Push Button Configuration

14 Adding another Jongo to your network?

15 Using a ChargePAK F1

16 Updating Jongo

16 Technical specifications

3

Introduction

Jongo S3 is a Wi-Fi/Bluetooth speaker that can be placed wherever you like thanks to its built-in
rechargeable battery pack. Once connected to your Wi-Fi network you can enjoy synchronised music,
radio and much more, streamed from your smartphone, tablet or compatible Pure products. For more
casual audio streaming, you can also use Bluetooth to stream one-to-one from a huge range of mobile
devices.

Jongo S3 is part of the Pure Jongo system. The Pure Jongo system lets you start with a single Jongo S3
and expand within a single room, or across multiple rooms, by adding more devices. You can control all
the devices using the Pure Connect app on your iPad, iPhone or Android device, or by using a compatible
Pure music streaming and radio system*.

Note: Jongo S3 will be referred to as Jongo throughout the rest of this user guide.

*Visit www.pure.com for more information on Jongo compatible Pure music streaming and radio systems.

Front panel controls

Volume upVolume down

Mute

Press to mute the volume on Jongo. Also used to
trigger software updates. See support.pure.com for
more information on how to update the software
on Jongo.

Power

Press to switch between Sleep, On and Off.
Power light also changes colour to indicate
various states. See page 6 for more
information.

4