Pioneer SC-91 User Manual
New Model Introduction
SC-91
Uncompromised power. Outstanding connectivity. Unmatched sound performance. Integrated acoustic calibration. Precision state of the art
engineering. When you demand the ultimate audiovisual experience, immerse yourself in perfection with Pioneer® Elite®. The SC-91 AV receiver
features optimize your audio immersion with Class D3 Direct Energy Amplication and a revised rear panel layout that’s easier to read and a new
icon-based GUI and wireless application to simplify setup. Enjoy enhanced connectivity with built-in Bluetooth® and dual-band 2.4 and 5 GHz Wi-Fi®.
With HDMI supporting 4K/60p/4:4:4 and HDCP 2.2 compatibility and true 3-dimensional sound with Dolby Atmos®, you’re always at the forefront of
audio innovation.
Class D
The Class D3 Amplier enabled simultaneous high-
power output of multi-channel sound, overcoming the
limits of analog ampliers. High efciency is provided
by Direct Power FET, featuring a simple, clean structure
with semiconductor chips directly mounted on the
circuit board for a signicantly improved sound quality
and response.
3
Dolby Atmos
The SC-91 is compatible with 5.1.2 and 5.2.2 Dolby Atmos
speaker congurations, the latest home theater sound platform.
You can reproduce object-oriented sound in smooth, curving
movements, or the realistic three-dimensional movement
overhead from either in-ceiling or height top speaker
congurations. However, the appropriate playback environment
is required to bring out the best from Dolby
Atmos. Then MCACC® Pro aligns the
phase and tone of every speakers. With
synchronized sound and image, you can
experience total immersion in the movie and
audio world.
®
SABRE™ Premier Audio DAC
The highly acclaimed 24-bit ES9006S SABRE
Premier Audio DAC for 7.2ch is adopted
to deliver exceptional digital sound. It
features unprecedented dynamic range
of up to 120 dB and low distortion, offering
clear audio reproduction, free of jitter.
Built-In Dual-Band
2.4GHz and 5.0GHz
Wi-Fi
With a dual-antenna
setup on the rear panel,
the SC-91 becomes
the ultimate wireless
control center for your
home entertainment
system. Two antennas
provide maximum signal
strength, and supporting
both bands means
higher stability and
greater Wi-Fi range.
New Model Introduction
HDMI and HDCP 2.2
The SC-91 has full-bandwith HDMI Ultra HD Pass-through (with 4k/60p upscaling)
with HDCP 2.2 (High-bandwith digital copy protection), ensuring compatibility with
current and upcoming 4k Ultra HD sources and televisions.
SC-91
Custom-Install Dream
The SC-91 offers both RS-232C interface and
full IP control providing compatibility with the
most popular home automation systems. For
custom-installed home theater solutions, it offers
multi-zone capability with both audio and video
The SC-91 is compatible with 5.1.2 and 5.2.2 Dolby Atmos
speaker congurations, the latest home theater sound
platform. You can reproduce object-oriented sound
in smooth, curving movements, or the realistic three-
dimensional movement overhead by the top speakers.
Dolby Atmos
support.
Please visit www.pioneerelectronics.com/dolbyatmos for more
information about building a Dolby Atmos Home Theater
Specications and design subject to modication without notice. Pioneer, Elite, MCACC, Advanced Sound Retriever, and the corresponding logos are registered trademarks of Pioneer Corporation and are used by Pioneer & Onkyo U.S.A. Corporation
under license. The impedances indicated are actual values that speakers can present to an amplier while playing back music. They do not refer to the nominal rated impedances of speakers you use. HDMI connection may not allow transmission of
copyright protected material, depending on the capability of the signal source. The terms HDMI and HDMI High-Denition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and
other countries. Dolby Atmos and the Dolby Atmos logo are registered trademarks of Dolby Laboratories. Windows and the Windows logo are trademarks of the Microsoft group of companies. AirPlay works with iPhone, iPad, and iPod touch with iOS
4.3.3 or later, Mac with OS X Mountain Lion, and Mac and PC with iTunes 10.2.2 or later. “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specically to iPod or iPhone respectively, and has been
certied by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect
wireless performance. Apple, AirPlay, iPad, iPhone, iPod, iTunes and Mac are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. The AirPlay logo is a trademark of Apple Inc. Wi-Fi is a registered
trademark of the Wi-Fi Alliance. The Wi-Fi CERTIFIED logo is a certication mark of the Wi-Fi Alliance. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. DLNA and DLNA Certied™ are trademarks, service marks,
or certication marks of the Digital Living Network Alliance HTC, the HTC logo, and HTC Connect are registered trademarks of HTC Corporation. SABRE is a registered trademark of ESS Technology, Inc. Android and Google Play are trademarks of Google
Inc. MHL and Mobile High-Denition Link are trademarks or registered trademarks of MHL LLC in the United States and other countries. Pandora and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc. used with
permission. Spotify is a registered trademark of the Spotify Group, registered in the U.S. and other countries.
Elite SP-EFS73
Dolby Atmos-enabled
Floorstander Speaker
5.2.2ch Conguration shown
SC-91
Dolby Atmos Receiver
Loading...