Phonic Smartman 300A, Smartman 700A User manual
User's Manual
Manual de Usuario
SMARTMAN 300A
SMARTMAN 700A
SMARTMAN 300A
ENGLISH........................................I
ESPAÑOL.......................................II
APPENDIX...........................................III
V1.0 10/29/2015
SMARTMAN 300A
SMARTMAN 700A
English Español
ALL-IN-ONE INTELLIGENT AUDIO SYSTEMS
SISTEMAS INTELIGENTES DE AUDIO TODO-EN-UNO
INTRODUCTION.................................................................1
FEATURES..............................................................................1
SYSTEM OVERVIEW.............................................................2
SETTING.................................................................3
SPECIFICATIONS................................................................4
APPENDIX
DIMENSIONS......................................................................1
CONTENTS
USER'S MANUAL
Phonic preserves the right to improve or alter any information within this
document without prior notice.
English
1. Read these instructions before operating this
apparatus.
2. Keep these instructions for future reference.
3. Heed all warnings to ensure safe operation.
4. Follow all instructions provided in this document.
5. Do not use this apparatus near water or in locations
where condensation may occur.
6. Clean only with dry cloth. Do not use aerosol or liquid
cleaners. Unplug this apparatus before cleaning.
7. Do not block any of the ventilation openings. Install
in accordance with the manufacturer
’
s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong is provided for your safety. If
the provided plug does not into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plug, convenience receptacles,
and the point where they exit from the apparatus.
11. Only use attachments/accessories by the
manufacturer.
12. Use only with a cart, stand, tripod, bracket, or
table by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus
combination to avoid injury from tipover.
13. Unplug this apparatus during lighting
storms or when unused for long
periods of time.
14. Refer all servicing to service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED PERSONNEL
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated
“
dangerous voltage”within the
product
’
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is in-
tended to alert the user to the presence of important operat-
ing and maintenance (servicing) instructions in the literature
accompanying the appliance.
WARNING: To reduce the risk of or electric shock, do
not expose this apparatus to rain or moisture.
CAUTION: Use of controls or
adjustments or performance
of procedures other than those may result in
hazardous radiation exposure.
The apparatus shall not be exposed to dripping or splashingand that no objects with liquids, such as vases,
shall be placed on the apparatus. The MAINS plug is used as thedisconnect device,the disconnect device shall
remain readily operable.
Warning: the user shall not place this apparatus in the area during theoperation so that the mains switch
can be easily accessible.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
English
1SMARTMAN 300A / SMARTMAN 700A
English
INTRODUCTION
Congratulations on your purchase of Phonic Smartman
active expansion speaker. Smartman active expansion
speaker uses Class D to provide sufcient power for
a wide range of venues, large and small. Its stylish
polymer enclosure also improves acoustical accuracy
by minimizing distortion and diffraction. Finally, reliability
and durability was the paramount factor throughout the
Smartman’s development.
Smartman active expansion speaker is designed
uniquely to work with Smartman Integrated Audio
System. By chaining together, Smartman can offer innite
expandability for your live PA systems.
The Woofers and Tweeters Engineered Right Unlike many
other speaker manufactures that use pre-assembled
OEM woofers and tweeters, all components of Smartman
are designed from scratch, in-house, by Phonic.
Everything, from the cone pulp formula and the curvature
of the tweeter’s titanium membrane to the characteristic
of the magnetic eld, is uniquely Phonic, uniquely
Smartman.
Smartman’s state-of-the-art woofer has a distinctly
high BL force factor and a long-throw extension which
produce marvelously deep and dened bass traditionally
unattainable in small enclosures. The compression
tweeter and conical horn complete the Smartman’s vivid,
transparent sound signature.
FEATURES
4Remarkable sound, remarkable power, and remarkable
style in a lightweight, durable enclosure
4High-powered Class D technology adapted
4Innite expansion when work with Smartman Integrated
Audio System
435mm pole mount for extended audience reach
4Impact resistant polymer enclosure with internal
bracings
4Tour grade steel grille (1.2 mm)
2 SMARTMAN 300A / SMARTMAN 700A
English
SYSTEM OVERVIEW
Smartman 300A and 700A share the same connection interface and controls.
LEVEL Knob
Adjust the input level.
PEAK Indicator
This indicator lights when the input signal hits the peak.
Combo Input Connector
This connector accepts both XLR and ¼” phone jack connectors for either balanced or unbalanced
connectors.
LINK OUT
This output XLR connector send out the signal received from input jack and is for chaining another
speaker.
POWER ON Indicator
This indicator lights when the power switch is in the position of “I”.
Power Switch
This switch will turn the Smartman speaker on and off.
AC Power Connector
Connect the included AC power cable to this connector and into a suitable power source allowing
the unit to be powered. This connector also contains the Smartman’s fuse. If the fuse blows, please
replace it with an identical fuse.
Loading...