Philips IntelliVue MP20, IntelliVue 30 User manual
IntelliVue MP20/MP30
Quick Guide
IntelliVue
M8001A/M8002A
M8001-9101E
Manufacturer:
Philips Medizin Systeme Boeblingen GmbH
Hewlett-Packard-Str. 2
71034 Boeblingen, Germany
© Copyright 2004 Koninklijke Philips Electronics N.V.
All rights are reserved. Reproduction in whole or in part is prohibited
without the prior written consent of the copyright holder.
The monitors, together with the Multi-Measurement Server (M3001A) and measurement
server extensions, comply with the Medical
Device Directive 93/42/EEC
.
Part Number M8001-9101E
Printed in Germany 05/04
4512 610 02441
*M8001-9101E*
Getting Started
This Getting Started Guide gives you an introduction
to the MP20/MP30 monitors and helps you get started
with monitoring. Refer to the Instructions for Use for
full information and instructions for the monitors, to
ensure safe and appropriate use.
IntelliVue MP20/MP30
The IntelliVue M20/MP30 (M8001A/M8002A)
patient monitor combines patient surveillance and data
management in a compact, portable monitor. It has a
10-inch TFT LCD flat panel SVGA display. The
standard input devices for the MP30 are the
Touchscreen and integrated navigation point; the
MP20 is supplied with an integrated navigation point
only. Up to four waves can be shown on MP20/MP30
Screens, 12 ECG traces can be shown on the 12-Lead
ECG Screen.
The MP20/MP30 can be connected to one MultiMeasurement Server (MMS) and any one of the
measurement server extensions.
1
MP20/MP30 Major Parts and
2
Keys
1
1
1 Color-coded alarm lamps
2 Alarms off lamp
3 Model indicator
4 ECG out
2
12
3
3
4
4
5
5
6
6
7
7
5 Navigation Point
6 Part number and serial number
7 Mounting quick-release lever
MP20/MP30 front panel
MP20/MP30 LED Colors and their
Meanings
1
2
3456 7
1 On/Standby switch
2 On/Standby LED
3 Error LED
4 Battery status LED
5 AC power operation LED
6 “read the documentation” symbol
7 Mounting quick-release lever
On/Standby
LED
Error LED
Battery LED
Green when monitor is switched on
Red if there is a problem with the
monitor
Green, yellow, and red.
See the section on Using the Batteries
for details
3
Related Products
Related products extend the measurement capabilities
of your monitor. None of the related devices have their
own power on/standby switches. They take their power
from the monitor, and switch on automatically when
you turn on the monitor. A green power-on LED
indicates when they are drawing power from the
monitor. A permanently illuminated, or flashing, red
LED indicates a problem with the unit that requires
the attention of qualified service personnel.
Multi-Measurement Server
(M3001A)
The Multi-Measurement Server (MMS) can
simultaneously monitor 3-, 5- or 10-lead ECG
(including arrhythmia and ST monitoring),
respiration, SpO
temperature. You can connect it to the monitor via a
cable or mount it on the back of the monitor, as shown
here.
4
, NBP and either invasive pressure or
2
Loading...