PENTAX digital cameras
K20D Code No. 19385
Barcode
0027075130 852
Weight: 715g
141.5mm
2.7”
141.5mm
What counts are the results:
perfecting your passion.
> New CMOS sensor with an impressive resolution of 14.6 megapixels,
delivering extremely finely resolved, brilliant photos. Disturbing
picture noise is reduced to a minimum. The PENTAX “Dynamic
Range Enlargement” (DRE) provides an expanded contrast range of
the photos.
> PENTAX “Shake Reduction”: the special advantage is that it is
integrated into the camera body so it is always available and usable
with any lens.
70mm
101.0mm
Standard accessories Code No.
AV cable I-IVC28 39262
USB cable I-USB17 39233
AC cable D-CO2E 39475
Battery charger D-BC50 39583
Li-Ion battery D-LI50 39581
Shoulder strap O-ST53 39323
Body cap 31016
Eyepiece cap ME 31011
Eyecup FP 30184
Accessory shoe cover FK 31040
Software S-SW74
Delivered without lens
Optional accessories
Art.-Nr. 50158
Aluminium case
Art.-Nr. 37248
Cable Release
CS 205
SLR case
(body + 2 lenses)
Art.-Nr. 39557
Battery grip
D-BG2
Art.-Nr. 50154Art.-Nr. 50099
Backpack for a
complete system
Art.-Nr. 37377
IR Remote Control F
> Along with the pentaprism finder the K20D offers “Live View”,
permitting perfect picture control directly on the wide angle
(160° viewing angle) monitor. This permits easy composition
from difficult camera angles.
> Reliable system against dust on the sensor: seals prevent dust
contamination, coating of the Low Pass filter prevents adhesion of
dust particles, vibration eliminates dust from the sensor, an adhesive
strip collects dust shaken from the sensor and the “Dust Alert” system warns of persistent adhering particles on the sensor.
> PRIME Processor – the heart of the camera, provides for the optimal
operational sequence of the camera’s internal processes. From the
moment that the shutter is released to when the image is stored in
memory PRIME assures sufficient computing power.
> Comprehensive features for the professional photographer, e.g.: pixel
mapping, focus correction, monitor calibration and many others.
> Colour management by “Custom Image”. Five colour or black-and-
white settings permit a selection of image characteristics similar to
standard film renditions.
Art.-Nr. 30333
Flash with case
AF-360 FGZ
Art.-Nr. 30150
Viewfinder loupe
O-ME53
Art.-Nr. 21510 Art.-Nr. 22190
smc PENTAX DA
14mm f/2.8
ED [IF]
Art.-Nr. 21767
smc PENTAX DA*
300mm f/4.0
ED [IF] SDM
Art.-Nr. 30425
Flash
AF-540 FGZ
Art.-Nr. 38575
Focusing screen,
latticed
smc PENTAX DA
35mm f/2.8 Makro
Limited Edition
Art.-Nr. 21650 Art.-Nr. 21660
smc PENTAX DA*
16 – 50mm f/2.8
ED AL [IF] SDM
Art.-Nr. 39357
Sensor Cleaning Kit
Art.-Nr. 38576
Focusing screen,
scaled
Art.-Nr. 21700
smc PENTAX DA*
200mm f/2.8
ED [IF] SDM
smc PENTAX DA*
50 – 135mm f/2.8
ED [IF] SDM
Digital SLR
TE CH NI CA L DATA
Additional information available at www.pentax.co.uk
SENSOR
• 15.07 Megapixels – total
14.6 Megapixels – effective
23.4x15.6mm CMOS sensor with Primary Colour Filter
• Colour depth: 3 x 12 Bit in RAW, 3 x 8 Bit in JPEG (internal 3 x 14 Bit)
• Resolution:
JPEG: (JPEG Baseline in quality steps of Premium, Optimal, Better, Good)
14.6 MP (4,672 x 3,120), 10 MP (3,872 x 2,592),
6 MP (3,008 x 2,000), 2 MP (1,824 x 1,216)
RAW: 14.6 MP (4,688 x 3,120)
• Sensitivity: Automatic, Manual selectable
(ISO 100, 200, 400, 800, 3,200, 6,400)
Lens
• PENTAX K
• Compatible with PENTAX K
Support for KAF Power Zoom functions
(K-mount lenses – with adapters – M42 and medium format lenses are
mechanically compatible. Due to the high resolution of camera and lack of
electronic contacts on the lenses no general statement can be made regarding
full compatibility of functions.)
Viewfinder
• Built-in, non-interchangeable Pentaprism finder
• Viewing area 95% with finder magnification of 0.95x
(with 50mm f/1.4 lens at infinity, -1m–1)
• Interchangeable “Natural Bright II” focusing screen
• Viewfinder indications below image area
• Dioptre correction -2.5 dpt. – +1.5 dpt.
Monitor
• 2.7” low-temperature polysilicon TFT Monitor with 230,000 dots, brightness
adjustment and wide viewing angle (approx. 160°)
• Image review after recording:
Single image, double image, Histogram, recording data and Hot Spot Warning,
32x enlargement, Thumbnail index (4, 9 or 16), slide show, image rotation
Preview
• “Live View” (TTL over image sensor), 100% field of view, grid display optional,
Depth-of-field preview button for focus depth preview, digital preview
Image Formats
• RAW (PEF, DNG), RAW + JPEG
JPEG (Exif 2.21), DCF
JPEG compression: JPEG Baseline in quality steps of Premium,
Optimal, Better, Good
Memory
• SD, SDHC cards
Focus
• Autofocus system: TTL Phase Matching with 11 focussing points (SAFOX VIII)
with indication in finder
Operational range: (EV 1 – EV 19)
• AF Single with focus lock or continuous AF (as a function of the exposure pro
gram)
• Focussing point selectable between automatic or manual choice,
spot focussing
• AF-Assist with built-in flash
• Fully compatible for ultrasonic AF lenses
Metering
• 16 segment TTL open aperture metering coupled with AF and lens information,
switchable between Multi segment, Centre weighted and Spot metering.
Operational range: EV 0 – EV 21
• Electronically controlled vertical-run focal plane shutter
Shutter speeds:
Automatic: 1/4,000 – 30sec. (stepless)
Manual: 1/4,000 – 30sec. (in 0.5 EV steps) and Bulb
Flash sync: 1/180 Sec.
• Green Mode, Programmed automatic (Hyperprogram), Sensitivity Priority,
Aperture Priority, Shutter Priority, ISO Automatic, Manual, flash sync,
long exposure
• Exposure compensation: ± 3EV in 1/2 steps, ± 2EV in 1/3 steps
• Auto bracketing: 3 or 5 exposures in 0.5 or 0.3 EV steps, extended auto
bracketing modes for contrast, saturation, focus, and white balance
• Exposure memory button
Digital SLR
Flash
• Built-in P-TTL automatic flash with automatic operation in poor lighting
conditions
• Manual on / manual off
• Preflash for reduction of the “Red Eye” effect
• Flash compensation -2 – +1 EV in 0.5 EV steps
• GN 13 at ISO 100
• Hotshoe on camera top for use of system flashes, x-sync connector for 3rd
party or studio system flashes
• High-Speed Synchronisation with appropriate PENTAX flashes
• Coverage 28mm (equivalent in 35mm film format)
bayonet
AF2
-, KAF- and KA- lens mounts.
AF2
-
Power requirements
• Rechargeable D-LI50 Li-Ion battery
• Battery compartment for spare D-LI50 battery
Connections
• USB 2.0 (High Speed)
• AV (compatible with NTSC and PAL)
• AC
Recording parameters
• 5 selectable colour profiles, as well as black-and-white photograph function
with different filter options
• White Balance: Automatic or manual. TTL setting over image sensor:
Daylight, Shade, Cloudy, Tungsten, Neon (W, N, D), Flash, manual balance,
6 selectable fine control settings for colour temperature
• Digital filters: B&W (6 options), Sepia (3 options), Colour (18 options), Soft
filter and Slim Filter, Colour extracting (6 options), HDR (3 options)
• Drive Modes: Single, Series (Hi/Low): 2.8fps. to 38 images in JPEG (Hi),
16 images in RAW (DNG), Interval to 99 images/day. Auto Bracketing,
Self-timer with 2sec. delay (mirror up lock) and 12sec. delay, IR Remote
Control with 0sec. or 3sec. delay, IR Remote Control continuous.
Special features
• PENTAX Noise Control reduces image noise
• Focus error correction
• Calibrateable monitor
• Freely selectable file names
• Image manipulation in RAW format
• PENTAX developed opto/mechanical Shake Reduction (integrated in camera
body). Adds approx. 4 stops to hand-held shots (for long exposures a tripod
should be used)
• 3 step “Dust Removal” system:
1. Special coating of Low Pass Filter,
2. Vibration to remove dust
3. Adhesive strip to capture dust
• “Dust Alert”: remaining persistent dust is located on the sensor and its
position is clearly indicated on the display.
• TTL “Live View” from image sensor: image viewing before recording with
100% image view.
• Compatible with ultrasonic lenses
• 36 individually selectable camera functions
• Metal chassis with fibre-reinforced plastic housing
• Weather-proofed body construction with 72 seals protecting against
dust and spray
• World time for 72 cities in 28 time zones
• Menu languages: English, French, German, Danish, Swedish, Finnish, Dutch,
Spanish, Portuguese, Italian, Polish, Czech, Hungarian, Turkish, Russian,
Korean, Chinese, Thai, Japanese
Print Functions
• PictBridge, DPOF (Digital Print Order Form), PRINT Image Matching III
System requirements
• Integrated USB connector
• PC: Windows XP, Windows Vista
CPU: Pentium IV or newer
Memory: minimum 512MB
Free hard drive space: 1GB or more
Monitor resolution: 1,280 x 1,024 or more
• Mac: OS x 10.2 or higher
CPU: POWER PC G5 or newer
Memory: minimum 512MB
Free hard drive space: 1GB or more
Monitor resolution: 1,280 x 1,024 or more
Software
• PENTAX PHOTO Browser 3/PENTAX PHOTO Laboratory 3 with integrated RAW
converter
As of 01.01.2008. All data reserved and subject to change without notice.