Installation and Assembly - Articulating Swivel Arm for
37" - 60" Plasma Screens
Maximum UL Load Capacity: 175 lb (79 kg)
Models: PLA 60, PLA 60-S,
PLAV 60, PLAV 60-S
This product is UL Listed. It must be
installed by a qualified professional
installer.
3215 W. North Ave. • Melrose Park, IL 60160 • (800) 729-0307 or (708) 865-8870 • Fax: (708) 865-2941 • www.peerlessmounts.com
ISSUED: 05-02-06 SHEET #: 202-9112-3 12-05-06
Read instruction sheet before you start inst allation and assembly.
WARNING
• Do not begin to install your Peerless product until you have read and understood the instructions and warnings
contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, please
call Peerless customer care at 1-800-729-0307.
• This product should only be installed by a qualified professional.
• Make sure that the supporting surface will safely support the combined load of the equipment and all attached hardware and components.
• Never exceed the Maximum UL Load Capacity of 175 lb (79 kg).
• Do not attach directly to a metal stud wall. Use of a triple stud WSP wall plate is required for attachment to metal
studs (contact customer care). Metal stud installation is not UL evaluated.
• If mounting to wood wall studs, make sure that mounting screws are anchored into the center of the studs. Use of an
"edge to edge" stud finder is highly recommended.
• Always use an assistant or mechanical lifting equipment to safely lift and position equipment.
• Tighten screws and nuts firmly, but do not overtighten. Overtightening can damage the items, greatly reducing their
holding power.
IMPORT ANT! Certain types of walls require additional mounting hardware...
WALL CONSTRUCTION ADDITIONAL HARDW ARE REQUIRED
Wood Stud, Wood Beam none
Concrete none
Metal stud WSP716, WSP716-S, WSP724, or WSP724-S
Other or unsure? Contact Customer Care
IMPORT ANT! T urn to the appropriate p age for your wall inst allation.
Installations:
To Wood Stud Walls ...................................................................................................... page 4
To Concrete Walls .......................................................................................................... page 5
Tools Needed for Assembly
• stud finder ("edge to edge" stud finder is recommended)
• drill
• 7/32" drill bit for wood studs
• 5/16" masonry drill bit for concrete
• 7/16" socket wrench with extension (recommended)
• level
• phillips screwdriver
Accessories
• External Wall Plate (WSP716, WSP716-S, WSP724, WSP724-S)
(Metal Stud not evaluated by UL)
2 of 9
ISSUED: 05-02-06 SHEET #: 202-9112-2 06-21-06
Parts List
DESCRIPTION QTY. PART # PART # PART # PART #
A wall plate 1 201-1040 201-4040 201-1040 201-4040
B tilt-roll assembly 1 201-1093 201-4093 201-1048 201-4048
C arm assembly 1 201-1072 201-4072 201-1049 201-4049
D wall support arm axle 1 201-1041 201-1041 201-1041 201-1041
E vinyl trim 3 600-1012 600-1012 600-1012 600-1012
F M10 x 1.5 x 15 mm screw bolt 8 520-9262 520-9262 520-9262 520-9262
G .505 x .75 x .062" nylon washer 1 540-1074 540-1074 540-1074 540-1074
H tilt adjustment knob 1 560-0108 560-0108 560-0108 560-0108
I carriage bolt 3/8"-16 x 3.25" 1 520-1315 520-1315 520-1315 520-1315
J 1.525 x 2 x .062" delrin washer 2 540-1070 540-1070 540-1070 540-1070
K #8-32 x .375" socket head cap screw 1 520-1210 520-1210 520-1210 520-1210
L plastic finishing cap 8 590-1123 590-1123 590-1123 590-1123
M holding pin 1 580-1166 580-1166 580-1166 580-1166
N retainer plug 1 590-1007 590-1007 590-1007 590-1007
O 5/16 x 3" wood screw 8 520-1243 520-1243 520-1243 520-1243
P .250 x 1 x .068" washer 8 540-1063 540-1063 540-1063 540-1063
Q 9/64" allen wrench 1 560-9728 560-9728 560-9728 560-9728
R cable management clips 4 590-1166 590-1166 590-1166 590-1166
S cable tie 4 590-1168 590-1168 590-1168 590-1168
T 36" polyester mesh sleeve 1 600-1015 600-1015 600-1015 600-1015
U 6 mm allen wrench 1 560-9716 560-9716 560-9716 560-9716
V 10 mm allen wrench 1 n /a n/a 560-9727 560-9727
W anchor 8 590-1025 590-1025 590-1025 590-1025
Before you start make sure all parts
listed are included with your product.
PLA 60 PLA 60-S PLAV 60 PLAV 60-S
D
E
F
G
H
K
N
L
M
CA
O
Some parts may appear slightly different than illustrated.
Q
W
J
P
R
B
I
VU
S
3 of 9 ISSUED: 05-02-06 SHEET #: 202-9112-3 12-05-06
T