H M8 x 20 socket pin screw4520-1120520-1120520-1120
I plastic washer 4540-1002540-1002540-1002
J M6 x 25 mm socket pin screw 4520-1211520-1211520-1211
K M8 x 25 mm socket pin screw 4520-1101520-1101520-1101
BCD
Qty.Part #Part #Part #
G
H
I
E
Insert keys (F) and turn clockwise to
1
unlock kiosk door as shown in Detail 1.
J
LOCKED
K
A
KIOSK
DOOR
DETAIL 1
UNLOCKED
2 of 7
Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112 or 708-865-8870.
ISSUED: 04-18-12 SHEET #:125-9298-2 05-23-12
Swing open kiosk door as shown.
2
Swing open support carriage as shown.
Cut zip ties and remove display carriage.
SUPPORT CARRIAGE
KIOSK
DOOR
DISPLAY CARRIAGE
Remove nuts and at washers that secure adapter brackets to display carriage as shown in Detail 2.
3
NUTS
FLAT
WASHERS
NUTS
FLAT WASHERS
DISPLAY CARRIAGE
ADAPTER
BRACKETS
DETAIL 2
ADAPTER
BRACKETS
3 of 7
Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112 or 708-865-8870.
ISSUED: 04-18-12 SHEET #:125-9298-2 05-23-12
Begin with the shortest length screw, hand thread through nylon shoulder washers and tilt bracket into display as
4
shown below. Screw must make at least three full turns into the mounting hole and t snug into place. Do not over
tighten. If screw cannot make three full turns into the display, select a longer length screw.
Plastic washers can be used for display spacing as shown below.
Repeat for remaining mounting holes, level brackets and tighten screws.
SCREWS
NYLON
SHOULDER
WASHER
ADAPTER
BRACKETS
PLASTIC WASHER
DISPLAY
USE BELOW DETAIL TO DETERMINE ADAPTER BRACKET MOUNTING LOCATIONS
5
200 mm
2.50"
HOLE PATTERN
(64mm)
200mm HP
400 mm
HOLE PATTERN
2.50"
(64mm)
400mm HP
HOLE PATTERN
(64mm)
2.50"
300 mm
300mm HP
4 of 7
Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112 or 708-865-8870.
ISSUED: 04-18-12 SHEET #:125-9298-2 05-23-12
Attach adapter brackets to display carriage using nuts and at washers as shown in Detail 3.
5
NUTS
FLAT
WASHERS
DETAIL 3
ADAPTER
BRACKETS
NUTS
FLAT WASHERS
DISPLAY CARRIAGE
ADAPTER
BRACKETS
DISPLAY
Hook display carriage onto support carriage and secure using four knobs (G) as shown in detail 4.
6
Close support carriage.
Display carriage can be adjusted horizontally and vertically by tightening or loosening four knobs (G)
as shown in Detail 4.
Close kiosk door.
DISPLAY NOT
SHOWN FOR
CLARITY
SUPPORT CARRIAGE
KIOSK
DOOR
G
DISPLAY
CARRIAGE
DETAIL 4
5 of 7
Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112 or 708-865-8870.
ISSUED: 04-18-12 SHEET #:125-9298-2 05-23-12
Insert keys (F) and turn
7
counter-clockwise to lock kiosk door.
UNLOCKED
LOCKED
6 of 7
Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112 or 708-865-8870.
ISSUED: 04-18-12 SHEET #:125-9298-2 05-23-12
Adapter Assembly Adjustment
Use legend below to determine position of display.
8
NOTE: Each knob can be adjusted independently for ne tuning adjustments.
Turn knob CLOCKWISE to tighten
Turn knob COUNTER-CLOCKWISE to loosen
IN
OUT
TILT FORWARD
TILT BACKWARDTILT RIGHTTILT LEFT
7 of 7
Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112 or 708-865-8870.
ISSUED: 04-18-12 SHEET #:125-9298-2 05-23-12
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.