Peerless-AV HLC-KIT-Q10 Installation

Installation and Assembly:

r

A

Mounting Hardware for Safety and Security Cable Kit

Model: HLC-KIT, HLC-KIT-Q10

Parts List

Description Qty. Part NumberQty. Part Numbe

safety cable 1 600-0187 10 600-0187

B 10-16 x 3/4" penta pin wood screw 1 520-9258 10 520-9258
C M4 x 12 mm socket pin screw 1 510-1060 10 510-1060
D #10 flat washer 1 540-9400 10 540-9400
E M5 x 10 mm socket pin serrated washer head screw 1 510-1126 10 510-1126
F M6 x 12 mm socket pin serrated washer head screw 1 510-1050 10 510-1050
G M8 x 15 mm socket pin screw 1 520-1068 10 520-1068
H M4 x 12 mm socket pin screw 1 520-1079 10 520-1079

I M4 x 25 mm socket pin screw 1 520-2082 10 520-2082
J M5 x 12 mm socket pin screw 1 520-1064 10 520-1064
K M5 x 25 mm socket pin screw 1 520-1122 10 520-1122
L M6 x 20 mm socket pin screw 1 520-9554 10 520-9554
M M4 flat washer 1 540-2081 10 540-2081
N #8 split lock washer 1 540-2044 10 540-2044
O #10 flat washer 1 540-9400 10 540-9400
P #10 split lock washer 1 540-1035 10 540-1035
Q 1/4" flat washer 1 540-9440 10 540-9440
R 1/4" split lock washer 1 540-9402 10 540-9402
S 4 mm allen wrench 1 560-9646 3 560-9646
T M5 x 1" penta pin tool 1 520-9249 3 520-9249

HLC-KIT HLC-KIT-Q10

BACK OF DISPLAY HARDWARE

B

C D E

F

A

G

DISPLAY STAND NECK HARDWARE

H I

J K

L

M

N

S T

O

P

Q

R

1 of 3

ISSUED: 12-02-10 SHEET #: 120-9099-1

Remove one stand mounting screw (provided with display) and replace it with display stand neck hardware

1

provided (H-R).
NOTE: Verify that washer diameter is smaller than the recess it is going into. Not doing so may result in difculty

removing the washer.

DISPLAY

REPLACE EXISTING HARDWARE WITH
DISPLAY STAND NECK HARDWARE (H-R)

Attaching Safety/Security Cable to Display

Attach larger diameter end of safety cable (A) to back of display as shown using back of

2

display hardware provided (C-G).
WARNING: Safety cable is not to support the weight of the display.

OF DISPLAY USING DISPLAY
HARDWARE PROVIDED (C-G)
AS SHOWN

DISPLAYATTACH SAFETY CABLE TO BACK

USE LARGER DIAMETER END

A

2 of 3

ISSUED: 12-02-10 SHEET #: 120-9099-1