PEERLESS HDS PPB 4″ Midwoofer User Manual [ru]

Specs:

HDS PPB 4″ Midwoofer

Type Number: 830870 Features:

The new High Definition Sound (HDS) PPB series is the culmination of Peerless working in close partnership with end users of Peerless-based audio products. With a deep understanding of customer requirements and needs, Peerless developed the proprietary and highly advanced Polypropylene Black (PPB) cone material used in the HDS PPB Series, creating a stiff but still dampened cone that remains stable even under the greatest sound pressures. See architecture notes for HDS Platform

Driver Highlights: PPB diaphragm, 26 mm coil, AL See Application Notes

Go to Application Notes.

Go to Architecture Notes

Electrical Data

Nominal impedance Minimum impedance Maximum impedance DC resistance Voice coil inductance

T-S Parameters

Resonance Frequency Mechanical Q factor Electrical Q factor Total Q factor Force factor Mechanical resistance Moving mass Suspension complian ce Effective cone diameter Effective piston area Equivalent volume Sensitivity (2.83V/1m) Ratio BL/√(Re) Ratio fs/Qts

Power handling

Zn 8 ohm Zmin 5.6 ohm Zo 30.8 ohm Re 5.2 ohm Le 0.6 mH

fs 77.6 Hz Qms 3.19 Qes 0.65 Qts 0.54 Bl 4.8 Tm Rms 0.9 Kg/s Mms 5.9 g Cms 0.72 mm/N D 8.4 cm Sd 55 cm Vas 3 ltrs 87 dB

2.1 F 144

100h RMS noise test (IEC) Long-term Max Power (IEC 18.3) Max linear SPL (rms) @ power Short Term Max power (IEC 18.2)

Voice Coil and Magnet Parameters

Voice coil diameter Voice coil height Voice coil layers Height of the gap Linear excursion +/Max mech. excursion +/Flux density of gap Total useful flux Diameter of magnet Height of magnet Weight of magnet

Notes: IEC specs refer to IEC 60268-5 third edition. All Tymphany products are RoHS compliant.

-- W

-- dB/W

-- W

26 mm 12 mm 2 6 mm 3 mm

-- mm

-- mWb

0.7 mWb 81 mm 15 mm

0.31 Kg

Frequency: 830870

Mechanical Dimensions:830870