PEERLESS HDS Nomex 5¼″ Midwoofer User Manual [ru]

Specs:

HDS Nomex
5¼″ Midwoofer

Type Number: 832873
Features:

The High Definition Sound (HDS) NOMEX Series offers high­quality solutions for both multi-way speaker systems and vented
box applications. Featuring "shorting rings" for low distortion and
coils offering perfect linear compatibility with NOMEX cones,
these audio transducers are characterized by their very open,
very rich sound character.
See architecture notes for HDS Platform

Driver Highlights: Nomex diaphragm, 26 mm coil, AL

Go to Architecture Notes

Electrical Data

Nominal impedance
Minimum impedance
Maximum impedance
DC resistance
Voice coil inductance

T-S Parameters

Resonance Frequency
Mechanical Q factor
Electrical Q factor
Total Q factor
Force factor
Mechanical resistance
Moving mass
Suspension complian ce
Effective cone diameter
Effective piston area
Equivalent volume
Sensitivity (2.83V/1m)
Ratio BL/√(Re)
Ratio fs/Qts

Power handling

Zn 8 ohm
Zmin 6.5 ohm
Zo 37.3 ohm
Re 6 ohm
Le 0.8 mH

fs 58.6 Hz
Qms 2.39
Qes 0.46
Qts 0.38
Bl 6.6 Tm
Rms 1.4 Kg/s
Mms 9.1 g
Cms 0.81 mm/N
D 10.6 cm
Sd 88 cm
Vas 8.7 ltrs

88.3 dB

2.7
F 152

2

100h RMS noise test (IEC)
Long-term Max Power (IEC 18.3)
Max linear SPL (rms) @ power
Short Term Max power (IEC 18.2)

Voice Coil and Magnet Parameters

Voice coil diameter
Voice coil height
Voice coil layers
Height of the gap
Linear excursion +/­Max mech. excursion +/­Flux density of gap
Total useful flux
Diameter of magnet
Height of magnet
Weight of magnet

Notes:
IEC specs refer to IEC 60268-5 third edition.
All Tymphany products are RoHS compliant.

-- W

-- W

-- dB/W

-- W

26 mm
13 mm
2
6 mm

3.5 mm

-- mm

-- mWb

0.7 mWb
90 mm
15 mm

0.4 Kg

Frequency: 832873

Mechanical Dimensions:832873

Tymphany™ and are trademarks of Tymphany Corporation. © 2009, Tymphany Corporation. All rights reserved. 012409