Parkside PTL 4 A1 Translation Of The Original Instructions
EXTENDABLE PRESSURE WASHER LANCE
PTL 4 A1
EXTENDABLE PRESSURE WASHER
LANCE
Translation of the original instructions
TELESKOP-LANZE FÜR
HOCHDRUCKREINIGER
Originalbetriebsanleitung
TELESCOPISCHE LANS VOOR
HOGEDRUKREINIGER
Vertaling van de originele gebruiksaanwijzing
IAN 297585
297585_par_Teleskoplanze für Hochdruckreiniger_cover_IE_NI_NL.indd 2 15.01.18 11:47
Before reading, unfold the page containing the illustrations and familiarise yourself with all
functions of the device.
Vouw vóór het lezen de pagina met de afbeeldingen open en maak u vertrouwd met alle functies
van het apparaat.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend
mit allen Funktionen des Gerätes vertraut.
GB / IE / NI Translation of the original instructions Page
NL / BE Vertaling van de originele gebruiksaanwijzing Pagina
DE / AT / CH Originalbetriebsanleitung Seite
297585_par_Teleskoplanze für Hochdruckreiniger_cover_IE_NI_NL.indd 3 15.01.18 11:47
4
11
18
24
23
1
2
3
4
5
6
7
8
22
21
20
19
18
17
9
10
11
12
13
14
1516
GB IE NI
Content
Intended use ......................................... 4
General Description ............................. 4
Extent of the delivery ........................ 4
Overview ........................................... 5
Technical data ....................................... 5
Notes on Safety .................................... 5
Symbols in the manual ..................... 5
General notes on safety .................... 5
Working with the equipment.............. 6
Fitting ..................................................... 6
Screwing on the base ....................... 6
Inserting the high-pressure hose ...... 6
Connecting the tip of the tube ........... 7
Initial start-up ........................................ 7
Working instructions .......................... 7
Using detergents ............................... 7
Cleaning and Maintenance .................. 8
Cleaning ............................................ 8
Maintenance ..................................... 8
Storage .................................................. 8
Waste Disposal and Environmental
Protection .............................................. 8
Replacement parts / Accessories ....... 8
Guarantee .............................................. 8
Repair Service....................................... 9
Service-Center .................................... 10
Importer .............................................. 10
Introduction
Keep this manual safely and in the event
that the product is passed on, hand over
all documents to the third party.
Intended use
This equipment is not suitable for commercial use. Commercial use will invalidate the
guarantee.
- for cleaning using a high-pressure water
jet in difcult-to-access areas. Particularly
at height.
- cleaning the object according to its
manufacturer’s information.
The device is designed for use with pressure
washer Parkside
PHD 100 A1, PHD 100 B2, PHD 100 C2,
PHD 100 D2, PHD 100 E2, PHD 110 A1,
PHD 135 A1, PHD 150 A1, PHD 150 B2,
PHD 150 C2, PHD 150 D3, PHD 150 E4,
PHD 150 F4.
General Description
The diagram of the most im-
portant functional elements
can be found on the foldout
side.
Extent of the delivery
Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
The operating instructions constitute part of
this product. They contain important information on safety, use and disposal.
Before using the product, familiarise yourself with all of the operating and safety
instructions. Use the product only as described and for the applications specied.
4
Unpack the device and verify the
contents:
- Telescopic tube, in several parts
- Flat jet nozzle
- Angle piece
- Safety clamp
- High-pressure hose
- Base
- Shoulder strap
- Instruction for use
NIIEGB
A
Overview
1 Flat jet nozzle
2 Angle piece
3 Safety clamp
4 Third telescopic tube
5 Second telescopic tube
6 First telescopic tube
7 Main tube
8 Handgrip area
9 Shoulder strap
10 Opening for high-pressure hose
11 Handgrip
12 Connection for high-pressure
hose
13 Unlocking mechanism for high-
pressure hose
14 Base
15 Water connection
16 Unlocking mechanism for water
connection
17 High-pressure hose
18 Connection for telescopic tube
19 Connection for angle piece
20 Switch-on lever
21 Switch lock
22 Strap bracket
23 Auxiliary handle and rotary lock
24 Unlocking mechanism for high-
pressure hose
Technical data
Telescopic tube ................ PTL 4 A1
Suitable for devices with the following
performance data:
Rated pressure (p) ......11 MPa / 1595 psi
Permissible pressure (p max)
................................16 MPa / 2320 psi
Max. ow rate (Q max)
.................................................450 l/h
Max. Supply temperature (T max)
..................................... 60 °C / 140 °F
Notes on Safety
This Section is concerned with the basic
safety rules when working with the patio
cleaner.
Symbols in the manual
Warning symbols (the danger
can be explained at the place
of the exclamation mark) with
information on damage and
injury prevention.
Help symbols with information on
improving tool handling.
General notes on safety
• This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been
given supervision or instruction concern-
ing use of the appliance by a person
responsible for their safety.
• People who are unfamiliar with the op-
erating instructions are not permitted to
use the equipment. The operation of the
equipment is not authorised for people
under the age of 16.
5
GB IE NI
Working with the equipment
CAUTION. pressure wash-
ers can be dangerous if they
are not operated correctly!
The jet must never be directed at people, animals, electric equipment con-nected to
the power supply or against
the actual pressure washer.
• Do not direct the jet at yourself or others
in order to clean clothes and shoes.
• Do not operate the pressure washer
when other people are in the immedi-
ate vicinity, other than they are also
wearing protective clothes.
• Take appropriate measures to keep children away from the equipment whilst it
is running.
• Dispose of the packaging material correctly.
• Do not use the equipment in the vicinity
of ammable liquids or gases. Nonobservance will result in a risk of re or
explosion.
• Store the equipment in a dry place and
out of reach of children.
• Children should be supervised to ensure that they do not play with the ap-
pliance.
• Follow the security tips of your high-
pressure washer.
• The operator or user is responsible for
any accidents or personal injury and/
or material damage to third parties or
their property.
Caution! To avoid damage to the
equipment and any possible person
injury resulting from this:
• Do not work with damaged or incom-
plete equipment, or with equipment
that has been converted without the approval of the manufacturer.
• Protect the patio cleaner from frost
• Use only original accessories and do
not carry out conversion work on the
equipment.
Fitting
Screwing on the base
Screw on the base (14) to the thread so-
cket on the handgrip (11).
Tighten the base solely by hand.
Inserting the high-pressure
hose
1. Slide the high-pressure hose (17) with
connection for the angle piece (19)
rst into the opening for the high-pressure hose (10).
2. Slide the high-pressure hose (17)
through the main tube (7) and the
rst, second and third telescopic tube
(6,5,4). Slide the high-pressure hose
(17) until it starts to exit from the third
telescopic tube (4) with the connection
for the angle piece (19).
3. Insert the connection for the telescopic
tube (18) into the connection for the
high-pressure hose ( 12) on the
handgrip (11). It will lock into place.
• Do not use for cleaning windows.
6
NIIEGB
To release the high-pressure hose
(17), press the unlocking mechanism for the high-pressure hose
(13). Pull away the high-pressure
hose (17) at the connection for
the telescopic tube (18).
Connecting the tip of the
tube
1. Remove the safety clamp (3) from the
angle piece (2).
2. Insert the connection for the angle piece (19) into the angle piece (2). It will
lock into place.
3. Slide the angle piece (2) with the highpressure hose (17) back across the
third telescopic tube (4) until the two
holes in the angle piece (2) align with
the two holes in the third telescopic
tube (4).
4. Slide the safety clamp (3) through the
angle piece (2) and the third telescopic
tube (4).
5. Fix the at jet nozzle (1) by inserting it
and rotating it (bayonet locking device)
with the angle piece (2).
1. Adjust the telescopic tube to the
desired length.
2. Release the rotary lock on the auxiliary
handle (23) and pull the telescopic
tube (4,5,6) out of the preceding telescopic tube (5,6), or main tube (7).
Fix the now extended telescopic tube
(4,5,6) using the rotary lock on the auxiliary handle (23).
3. Establish a water connection with your
high-pressure cleaner at the water con-
nection (15) on the handgrip (11) of
your telescopic tube.
4. Put the shoulder strap (9) on.
5. Hold the telescopic tube with both
hands on the handgrip (11) and on the
handgrip area (8).
6. If the high-pressure cleaner is activa-
ted, pressing the switch-on lever (20)
ejects high-pressure water from the at
jet nozzle (1). Once the switch-on lever (20) is released, the ow of water
stops.
Pressing the switch lock (21) enables
you to secure the telescopic tube
against being unintentional switched
on.
Initial start-up
Working instructions
Be aware of the recoil force when
the water jet commences. Ensure
you are standing rmly and holding the spray gun rmly. Otherwise
there is a risk of injuring yourself or
other people.
Using detergents
The pressure cleaner was designed for
operation with a neutral detergent based
on a biologically decomposable anionic
tenside. Other detergents or chemical substances could impair the safety of the pres-
sure cleaner and damage it. Such damage
to the equipment is not covered by the
guarantee.
7
GB IE NI
Cleaning and
Maintenance
Always remove the mains plug of
the high pressure cleaner before
working on the device. There is a
risk of electric shock or injury from
moving parts.
Cleaning
Always keep the device clean. Do
not use any detergents or solvents.
• Only clean the device with a soft brush
or a slightly moist cloth.
Maintenance
The device is maintenance-free.
Storage
• Store the device in a frost-free room.
Waste Disposal
and Environmental
Protection
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling
centre when you have nished with them.
Hand the tool in at a recycling centre. The
plastics and metal parts can be separated
and recycled. Ask your Service Center about
this.
Defective units returned to us will be
disposed of for free.
Replacement parts /
Accessories
Spare parts and accessories can
be obtained at
www.grizzly-service.eu
If you do not have internet access, please
contact the Service Centre via telephone
(see “Sercice-Center” Page 10). Please
have the order number mentioned below
ready.
Guarantee
Dear Customer,
This equipment is provided with a 3-year
guarantee from the date of purchase.
In case of defects, you have statutory rights
against the seller of the product. These
statutory rights are not restricted by our
guarantee presented below.
Terms of Guarantee
The term of the guarantee begins on the
date of purchase. Please retain the original
receipt. This document is required as proof
of purchase.
If a material or manufacturing defect
occurs within three years of the date of
purchase of this product, we will repair or
replace – at our choice – the product for
you free of charge. This guarantee requires
the defective equipment and proof of pur-
chase to be presented within the three-year
period with a brief written description of
what constitutes the defect and when it occurred.
If the defect is covered by our guarantee,
you will receive either the repaired product
or a new product. No new guarantee pe-
riod begins on repair or replacement of the
product.
8
NIIEGB
Guarantee Period and Statutory
Claims for Defects
The guarantee period is not extended by
the guarantee service. This also applies for
replaced or repaired parts. Any damages
and defects already present at the time of
purchase must be reported immediately after unpacking. Repairs arising after expiry
of the guarantee period are chargeable.
Guarantee Cover
The equipment has been carefully produced in accordance with strict quality
guidelines and conscientiously checked
prior to delivery.
The guarantee applies for all material and
manufacturing defects. This guarantee
does not extend to cover product parts
that are subject to normal wear and may
therefore be considered as wearing parts
(e.g. brush or nozzles) or to cover damage
to breakable parts (e.g. switches, batteries,
or parts made of glass).
This guarantee shall be invalid if the prod-
uct has been damaged, used incorrectly or
not maintained. Precise adherence to all of
the instructions specied in the operating
manual is required for proper use of the
product. Intended uses and actions against
which the operating manual advises or
warns must be categorically avoided.
The product is designed only for private
and not commercial use. The guarantee
will be invalidated in case of misuse or
improper handling, use of force, or inter-
ventions not undertaken by our authorised
service branch.
Processing in Case of Guarantee
To ensure quick handling of you issue,
please follow the following directions:
• Please have the receipt and item number (IAN 297585) ready as proof of
purchase for all enquiries.
• Please nd the item number on the rating plate.
• Should functional errors or other de-
fects occur, please initially contact the
service department specied below
by telephone or by e-mail. You will
then receive further information on the
processing of your complaint.
• After consultation with our customer
service, a product recorded as defective can be sent postage paid to the
service address communicated to you,
with the proof of purchase (receipt)
and specication of what constitutes
the defect and when it occurred. In order to avoid acceptance problems and
additional costs, please be sure to use
only the address communicated to you.
Ensure that the consignment is not sent
carriage forward or by bulky goods,
express or other special freight. Please
send the equipment inc. all accessories
supplied at the time of purchase and
ensure adequate, safe transport packaging.
Repair Service
For a charge, repairs not covered by
the guarantee can be carried out by
our service branch, which will be happy to
issue a cost estimate for you.
We can handle only equipment that has
been sent with adequate packaging and
postage.
Attention: Please send your equipment to
our service branch in clean condition and
with an indication of the defect.
Equipment sent carriage forward or by
bulky goods, express or other special
freight will not be accepted.
9
Loading...