Shown in Black Chrome: Millenia™300, Millenia™30
3
MILLENIA™SERIES
M
illenia™speakers offer sophisticated state-of-the-art Paradigm®Reference technology
wrapped in a sleek lifestyle design to complement today’s flat-panel televisions.
Just like their more traditionally styled counterparts, Millenia
™
speakers of fer breathtaking music
reproduction that lays bare the very essence of the original performance! And that complex mix of
dialog, music and action effects that make up a movie’s soundtrack? Millenia
™
delivers it with a
realism that no other high-end lifestyle system can! Sound & Vision magazine had this to say:
“… beautiful and chic … dynamic and powerful … quick and highly detailed … superb imaging
… dialog remained resolutely clear … no sign of distress even in the most dynamic passages.”
The slim Millenia
™
20 Trio takes lifestyle design a step further! Three main speakers in one
fabulously sleek lifestyle cabinet—a left front speaker, a right front speaker and a center channel—
a superb single-cabinet alternative for those who want to streamline and simplify their music and
home theater setup without sacrificing even an ounce of high-end sound quality.
Although the Trio can hold its own when it comes to delivering the lower frequencies with clean,
clear, well-extended bass performance, just like all Millenia
™
speakers it is d esigned to be use d with
a subwoofer. For a truly unforgettable music and home theater experience, pair it with a Paradigm
®
Reference SUB 12.
“Towers of power. A swanky high-performance system that works in even the most style-conscious homes.”
– Michael Trei, Sound & Vision on the Millenia™300 system
4
Shown in Black Chrome: Millenia™20 Trio
High-Frequency Drive Units
Like all Paradigm®Reference high-frequency drivers, Millenia™drivers exhibit breathtaking timbral clarity and a transparency that is comparable to the very best electrostatic
or ribbon designs. Exceptionally smooth, vividly detailed and free of any spurious
resonances, their performance is simply unmatched in high-end lifestyle design.
• S-PAL
™
Satin-Anodized Pure-Aluminum Domes:
Deep-anodized for exceptional rigidity and paired with a low-mass treated textile
suspension. Highs are spacious, clear, silky smooth and exceptionally well extended.
• Rigid High-Pressure Die-Cast Aluminum Chassis:
Eliminate mechanical flexing and ringing and effectively dissipate heat—a tweeter’s
foremost adversary.
• Critical Coupling of Phase-Alignment Bridge and Elevated Dome:
Extremely flat frequency response with optimal off-axis dispersion.
• Dual Magnets and Advanced Motor Structures:
Computer-optimized using Finite Element Analysis (FEA), a highly advanced tool for
component design that helps us model a structure with an intense magnetic field
force in the gap. Power handling and output linearity are superb under all conditions.
• High-Power Apical
™
Formers:
High-power, high-temperature voice coils and ventilated Apical
™
formers ensure
high-power handling, low distortion and long-term reliability.
5
MILLENIA™SERIES
Millenia™high-frequency driver Millen ia™midrange driver Millenia™bass driver
Midrange and Bass Drive Units
Our ears are particularly attuned to lower treble and midrange frequencies—
we instinctively recognize sound anomalies, deviations from what is ‘natural.’
Paradigm engineers know this and in their exhaustive testing, re-testing,
listening and learning they have developed drivers that have no equal in the
high-end lifestyle speaker category …
• MLP
™
Mica-Loaded-Polymer Midrange and Bass/Midrange Cones:
High stiffness-to-mass ratio of polypropylene and the exceptional damping
properties of the injected mica ensure performance that is accurate, lifelike,
wonderfully detailed and critically revealing.
• HTD
™
Heat Transfer and Dissipation System—Our Proprietary Design:
High-pressure die-cast aluminum chassis cradles the entire neodymium
magnet structure. The resulting increase in surface area provides for exceptional
heat transfer and dissipation. Exterior heatsink fins reinforce the cooling and
dissipation process.
• Solid-Aluminum Phase Plugs:
Not only do they look good, they maintain linear response and play an important
role in improving airflow for significant gains in heat dissipation.
• Overdesigned Nitrile-Butadiene Rubber (NBR) Surrounds
and Nomex
™
Spiders:
NBR is known for its excellent damping properties and reliability (particularly
under extreme conditions). The Nomex
™
polyamide spider helps promote
extended, very linear excursion and ultra-low distortion.
• Precision-Engineered Mineral-Filled Polypropylene Bass Cones:
The injection of mineral into the polypropylene ensures a high stiffness-tomass ratio and excellent internal damping. The result is high output with
minimal distortion and excellent extension—free of cone standing waves and
micro distortions.
• Oversize Magnet Assemblies with Symmetrical Focused Field Geometry:
Low distortion and unparalleled linearity even under extreme conditions.
• Advanced Motor Structures:
Lightweight high-temperature copper-clad aluminum-wire voice coils. A rigid,
low-mass design wound on vented Kapton
®
polyamide formers. Excellent linear
response regardless of cone excursion.
High-End Touches
• Ultra-Slim Extruded-Aluminum Enclosures:
At a fraction of the thickness of typical wood enclosures, the extruded design
affords all the benefits of a larger speaker in a significantly slimmer package,
with no noticeable internal resonances. The dramatic side curvature not only
adds a touch of class, it also provides additional structural integrity.
• Premium Finish:
Millenia
™
speakers come in a highly polished Black Chrome finish.
• High-Velocity Low-Noise Aluminum Ports:
Bass efficiency and minimal turbulence distortion for cleaner and more
articulate bass response.
• Magnetically Attached Speaker Grilles
• Tempered Glass Base on Floorstanding Models
Millenia
™
speakers are designed to be used with a subwoofer. For unforgettable
music and home theater performance add a Paradigm
®
Reference SUB 12 to
complete your Millenia
™
system.
Shown in Black/Dark Gray: Millenia™ADP
6
Shown in Black Chrome: Millenia™30
SPECIFICATIONS
Millenia™20 Millenia™30 Millenia™20 Trio
Design
Crossover(s)
High-Frequency Driver(s)
Bass / Midrange Driver(s)
(Midrange for ADP)
Bass Driver(s)
Low-Frequency Extension*
Frequency Response: On-Axis
30° Off-Axis
Sensitivity – Room / Anechoic
Suitable Amplifier Power Range
Maximum Input Power†
Impedance
Dimensions:
Enclosure
(h x w x d)
(Height for 200/300 includes base/spikes/cones)
Glass Base (w x d)
We i g h t (Unpacked)
Finish(es)
Speaker Stand
www.paradigm.com
5-driver, 2-way acoustic suspension, LCR,
on-wall / stand / shelf-mounted
2nd-order electro-acoustic at 2.0 kHz
25-mm (1 in) S-PAL
™
dome, ferro-fluid damped / cooled,
die-cast heatsink chassis
Two 115-mm (4-1/2 in) MLP
™
cones, 25-mm (1 in) dual-layer
voice coils, HTD
™
system die-cast heatsink chassis
Two 115-mm (4-1/2 in) mineral-filled polypropylene cones,
25-mm (1 in) dual-layer voice coils, HTD
™
system
die-cast heatsink chassis
77 Hz (DIN)*
±2 dB from 110 Hz – 20 kHz
±2 dB from 110 Hz – 18 kHz
92 dB / 89 dB
15 – 150 watts
110 watts
Compatible with 8 ohms
65.8 cm x 13.0 cm x 11.7 cm
25-7/8 in x 5-1/8 in x 4-5/8 in
n/a
5.7 kg / 12.6 lb each
Black Chrome
LS-18
5-driver, 2-way acoustic suspension, LCR,
on-wall / shelf-mounted
2nd-order electro-acoustic at 2.0 kHz
25-mm (1 in) S-PAL
™
dome, ferro-fluid damped / cooled,
die-cast heatsink chassis
Two 140-mm (5-1/2 in) MLP
™
cones, 38-mm (1-1/2 in) dual-layer
voice coils, HTD
™
system die-cast heatsink chassis
Two 140-mm (5-1/2 in) mineral-filled polypropylene cones,
38-mm (1-1/2 in) dual-layer voice coils, HTD
™
system
die-cast heatsink chassis
76 Hz (DIN)*
±2 dB from 110 Hz – 20 kHz
±2 dB from 110 Hz – 18 kHz
94 dB / 91 dB
15 – 200 watts
130 watts
Compatible with 8 ohms
90.0 cm x 15.1 cm x 13.7 cm
35-3/8 in x 5-7/8 in x 5-3/8 in
n/a
8 kg / 17.6 lb each
Black Chrome
n/a
9-driver, 3-channel, 2-way acoustic suspension,
on-wall / shelf-mounted
2nd-order electro-acoustic at 2.0 kHz, 2nd-order electro-acoustic
at 800 Hz (bass drivers on Left and Right channels)
Three 25-mm (1 in) S-PAL
™
domes, ferro-fluid damped / cooled,
die-cast chassis
Four 115-mm (4-1/2 in) MLP
™
cones, 25-mm (1 in) dual-layer
voice coils, HTD
™
system die-cast heatsink chassis
Two 115-mm (4-1/2 in) mineral-filled polypropylene cones,
25-mm (1 in) dual-layer voice coils, HTD
™
system
die-cast heatsink chassis
80 Hz (DIN)*
±2 dB from 120 Hz – 20 kHz
±2 dB from 120 Hz – 18 kHz
90 dB / 87 dB
15 – 150 watts
90 watts / channel
Compatible with 8 ohms
13.0 cm x 105.0 cm x 12.0 cm
5-1/8 in x 41-1/8 in x 4-5/8 in
n/a
8.2 kg / 18 lb each
Black Chrome
n/a
6-driver, 2-1/2-way bass reflex, floorstanding design
2nd-order electro-acoustic at 2.0 kHz, 2nd-order electro-acoustic
at 800 Hz (bass drivers)
25-mm (1 in) S-PAL
™
dome, ferro-fluid damped / cooled,
die-cast chassis
Two 115-mm (4-1/2 in) MLP
™
cones, 25-mm (1 in) dual-layer
voice coils, HTD
™
system die-cast heatsink chassis
Three 115-mm (4-1/2 in) mineral-filled polypropylene cones,
25-mm (1 in) dual-layer voice coils, HTD
™
system
die-cast heatsink chassis
55 Hz (DIN)*
±2 dB from 87 Hz – 20 kHz
±2 dB from 87 Hz – 18 kHz
92 dB / 89 dB
15 – 150 watts
130 watts
Compatible with 8 ohms
120.0 cm x 13.0 cm x 15.0 cm
47-1/4 in x 5-1/8 in x 5-7/8 in
23.8 cm x 22.8 cm / 9 in x 9-3/8 in
11.6 kg / 25.6 lb each
Black Chrome
n/a
6-driver, 2-1/2-way bass reflex, floorstanding design
2nd-order electro-acoustic at 2.0 kHz, 2nd-order electro-acoustic
at 200 Hz (bass drivers)
25-mm (1 in) S-PAL
™
dome, ferro-fluid damped / cooled,
die-cast chassis
Two 140-mm (5-1/2 in) MLP
™
cones, 38-mm (1-1/2 in) dual-layer
voice coils, HTD
™
system die-cast heatsink chassis
Three 140-mm (5-1/2 in) mineral-filled polypropylene cones,
38-mm (1-1/2 in) dual-layer voice coils, HTD
™
system
die-cast heatsink chassis
54 Hz (DIN)*
±2 dB from 87 Hz – 20 kHz
±2 dB from 87 Hz – 18 kHz
94 dB / 91 dB
15 – 200 watts
150 watts
Compatible with 8 ohms
133.3 cm x 15.1 cm x 17.5 cm
52-1/2 in x 5-7/8 in x 6-7/8 in
25.4 cm x 24.1 cm / 10 in x 9-1/2 in
13 kg / 28.5 lb each
Black Chrome
n/a
5-driver, 3-way acoustic suspension, cast-aluminum / ABS
enclosure, surround / rear, on-wall / bookshelf / stand-mounted
1st-order electro-acoustic at 2.0 kHz, 2nd-order electro-acoustic
at 300 Hz (bass driver)
Two 25-mm (1 in) S-PAL
™
domes, ferro-fluid damped / cooled,
die-cast chassis
Two 102-mm (4 in) MLP
™
cones, 25-mm (1 in) dual-layer
voice coils, HTD
™
system die-cast heatsink chassis
150-mm (6 in) mineral-filled polypropylene cone, 38-mm
(1-1/2 in) dual-layer voice coil, HTD
™
system die-cast
heatsink chassis
62 Hz (DIN)*
±2 dB from 95 Hz – 20 kHz
(Reverberant Soundfield)
88 dB / 85 dB
15 – 200 watts
100 watts
Compatible with 8 ohms
20.9 cm x 30.4 cm x 17.6 cm
8-1/4 in x 12 in x 7 in
n/a
6.0 kg / 13 lb each
Black / Dark Gray, White / Light Silver
GS-30
Millenia™200 Millenia™300 Millenia™ADP
*DIN 45 500. Indicates -3 dB in a typical listening room.†With typical program source, provided the amplifier clips no more than10% of the time. | Paradigm® stands sold separately, see your Dealer.
Loading...