Pandora DXL-0090L User Manual

Pandora would like to thank you for choosing our DXL-0090L service and security system
Pandora is a brand of Russian Experimental Engineering Factory, a full production cycle
electronics R&D facility. We design and produce car service-security systems for more than 10 years and have reached a considerable success on domestic markets – biggest security system markets in the world. Our systems are made to withstand severe weather conditions and criminal situation of northern Eurasia.
WARNING! IT IS STRONGLY ADVISED TO HAVE PROFESSIONAL CAR MECHANIC INSTALLING THE SYSTEM. CERTIFIED INSTALLERS ARE RARE OUTSIDE RUSSIA, BUT ANY CAR ELECTRONICS INSTALLER SHOULD BE ABLE TO INSTALL PANDORA DXL0090L USING INSTALLATION SCHEME IN THIS MANUAL AND ALARMSTUDIO SOFTWARE. MOST FEATURES ARE HIGHLY DEPENDENT ON COMPETENT INSTALLATION. OUR SYSTEMS ARE THOROUGHLY TESTED FOR QUALITY, SO IF A FEATURE FAILS TO PRODUCE EXPECTED RESULTS, MOST LIKELY THE PROBLEM IS IN IMPROPER INSTALLATION.
It is essential for systems functioning that you read and understand instructions in this manual. Note that all radio devices are subject to interference, which could affect proper performance.
This device has limited external factors resistance. It should not be subjected to water beyond occasional splatter, or operated in temperatures outside -40 to +80 oC range.
IMPORTANT! Note that this manual describes remote and manual functions for the most part. Functionality of the system is vast and would require a book-sized manual to fully describe. Instead we use a handy software named AlarmStudio that functions as both programming tool and an extended installation & functionality manual. It requires Windows and can be downloaded at pandorainfo.com
Product is in conformity with Electromagnetic Compatibility
Directive EMC 2004/108/EC and R&TTE Directive 1999/5/EC
2
User manualPandora DXL-0090L service-security system
Table of contents
System features 4 System set 5 Control remotes 6 LED indicator signals 7 Quick access functions of the main control remote 7 Icons of remote 8 Arming procedure 10 Disarming procedure 10 Control over system in case of emergency 11 Unlocking the trunk 12 Locking/unlocking doors when the engine is running 12 Car search function 13 Delayed arming (Hands Free mode) 13 PANIC mode 14 Remote and automatic engine start 14 System settings menu 17 Engine preheater 19 Timer channels 19 Car status control 21 Event history 21 Automatic engine start 22 Wiring diagram 24 Wiring description 27 Shock sensor settings 30 Motion sensor settings 31 Tilt sensor settings 32 Siren signal settings 32 Sound notification settings 33 Radio channel control settings 34 Maintenance/valet mode 35 Time settings 35 Alarm settings 36 Checking the number of recorded remotes 36 Replacing a battery in the remote 36
3
User manualPandora DXL-0090L service-security system
Changing the factory preset service PIN-code 37
Changing core settings 38
Siren sounds and turn light signals 44
Meaning of indicator LED colors 44
Glossary of terms 45
Warranty obligations 46
Installation certificate 47
Acceptance certificate 48
Warranty card 48
4
User manualPandora DXL-0090L service-security system
System features
2-way LCD remote
• Arming and disarming security system using separate buttons.
• Controls status of 10 independent security zones.
• Vibrating alert.
• 16 notification ringtones.
• OLED-display
• Vibration confirmation of the button press.
• AAA battery (1,5V) (not shipped with the system).
• Battery level indicator.
• Current time indication.
• Time synchronizes with the base unit for exact time stamp in the event history.
• Engine* and interior temperature, voltage and fuel level indication.
• Prompt remote access to the settings of shock sensor.
• Prompt remote access to the settings of motion sensor.
• View event history with time and event stamps.
• Automatic control of RF coverage zone.
Base unit
• Dialog coding of control commands sent at a frequency of 868 MHz.
• Individual 128-bit encryption key.
• Event history with exact time stamps is stored in the base unit and is transferred to the remote when it is in range.
• Can be complemented with BM-103/105 single-wire digital block relay.
• Built-in integral accelerometer for determining motion and shocks with adaptive processing algorithm and sensitivity controls via the remote.
• Monitoring of on-board voltage.
• Separate inputs for hood and trunk sensors.
• Advanced processing of sensor data, eliminating false alarm possibilities.
• Precision measurement of interior and engine* temperature, displayed on the remote.
• Sequential unlocking of the doors.
• Arming when the engine is running.
• Automatic arming.
• Registers delay for interior lighting when arming.
• Software updates via built-in micro-USB socket.
* Engine temperature indication is available only if temperature sensor is connected. The sensor availability depends on the system set.
5
User manualPandora DXL-0090L service-security system
exact time the event happened. Event history can be read using a remote.
System set
1. Base unit ..................................................................................................................................................... 1
2. Main control remote with LCD ............................................................................................................ 1
3. Plastic card with personal PIN-code ................................................................................................. 1
4. Supplementary control remote without LCD ................................................................................ 1
5. Main cable .................................................................................................................................................. 1
6. Cable with three-colored light indicator ........................................................................................ 1
7. Cable with VALET button ....................................................................................................................... 1
8. LIN interface wire .................................................................................................................................... 1
9. Fastening kit ............................................................................................................................................... 1
10. User installation manual with wiring diagram ............................................................................. 1
11. Relay automatic start module ............................................................................................................ 1
12. Temperature sensor ................................................................................................................................ 1
13. Packaging .................................................................................................................................................... 1
Manufacturer reserves the right to change set and construction of the product to improve its technological
and operational parameters without notification.
Car security zones
Pandora DXL-0090L service-security system guards following independent zones with corresponding zone notifications on the remote and recording alarms into the event history:
• car doors perimeter (separate for every door)
• front hood triggers
• trunk triggers
• ignition trigger
• brake pedal button
• triggering of the shock sensor (warning level)*
• triggering of the shock sensor (alarm level)
• triggering of the motion sensor
• triggering of the tilt sensor
• critically low on-board voltage
All* alarm events are recorded into system’s non-volatile memory with coordinates, date and
* Triggering of the warning level of shock sensor is not saved in the event history.
6
User manualPandora DXL-0090L service-security system
Aerial
SEND/ALARM indicator OLED-display
Button 1
Button 2
Button 3
12
12 0V
48
Button 1
SEND
indicator
Button 2
Button 3
MAIN CONTROL REMOTE SUPPLEMENTARY CONTROL REMOTE
Control remotes
Two-way remote is the main mean of control over the system. For easily distinguishable notifications the remote uses 16 ringtones. Each ringtone matches
particular event.
Remote has flashing LED indicators for additional information. The remote is fully operational when shipped. To switch the remote on, press and hold
button for 3 seconds. ‘REMOTE ON’ ringtone will play. Pressing and holding this button again for 3 seconds will cause the remote to switch off.
WARNING! ALL CONTROL COMMANDS ARE TRANSMITTED VIA RADIO CHANNEL, FOR MAXI MUM EFFECTIVENESS AND RANGE IT IS RECOMMENDED NOT TO SHIELD AERIAL AREA SEE PICTURE WITH FINGERS WHEN USING A REMOTE.
WARNING! REMOTE IS A UNIFIED CONTROL DEVICE. REMOTE CONTROL FUNCTIONS DEPEND ON SECURITY SYSTEM MODEL.
7
User manualPandora DXL-0090L service-security system
LED indicator signals
Green Send indicator
• Flashes occasionally if there is a connection.
• Goes dark when there is no connection.
Red Alarm indicator
• Flashes frequently if there is any notification.
• Flashes occasionally when there is no connection.
Quick access functions of the main control remote
System disarmed
System armed
(no alarm events)
Engine is running Engine is stopped
(short press)
Lock doors without arming
Arming with sound conrmation
Search mode – car will ash turn signals and sound horn for 5 seconds
(1 sec.)
Arming without sound conrmation
Search mode – car will ash turn signals without any sounds for 5 seconds
(2 sec.)
Switch on ignition support
(3 sec.)
Switch on programmed neutral
Remote engine start
(short press)
Unlock doors Unlock doors
Disarming with sound conrmation
(1 sec.)
Unlock doors
Disarming without sound conrmation
(>2 sec.)
Switch o ignition support
Switch o ignition when turbo timer, remote or automatic engine start is active
(short press)
Switch on LCD lighting (available only on the remote with LCD)
8
User manualPandora DXL-0090L service-security system
(1 sec.)
Unlock trunk (CH1)
(2 sec.)
Switch on/o timer channel (CH2)
(3 sec.)
Switch on/o remote (available only on the remote with LCD)
+
(short press)
PANIC mode
+
(short press)
Arming when the engine is running with sound conrmation
Arming in 30 seconds (Hands Free mode) with sound notication
+ (1 sec.)
Arming when the engine is running without sound conrmation
Arming in 30 seconds (Hands Free mode) without sound notication
Icons of remote
Flashing when command sending
Security mode status
Remote battery level
12 48
12 °
Numeric indicator. Displays current time
Battery voltage
Interior temperature
9
User manualPandora DXL-0090L service-security system
0
Engine temperature*
Fuel level*
Alarm clock
Shock sensor security zone
- Warning level of the sensor
- Alarm level of the sensor
Tilt sensor security zone
Motion sensor security zone
Door security zone. Separate for each door*
Front hood security zone
Trunk security zone
Ignition security zone
Handbrake/neutral indicator, Brake pedal security zone
Car battery voltage, voltage security zone
Engine operation icon
Engine is stopped
*Separate display indication of doors, original alarm status, fuel level depend on information in CAN-bus digital protocol of specific car.
P
10
User manualPandora DXL-0090L service-security system
Arming procedure
Arming the system allows monitoring of all security zones, locks the doors and blocks the engine. To arm the system when the engine is stopped, shortly press
button on the remote. The siren will sound and turn signals will flash once. The remote will play ‘ARMING’ ringtone and security mode status icon (the lock) will change to:
~~
short
press
doors locking
system arming
1 ash
1 ash
1x
press and hold 1 sec.
For arming without sound confirmation press for more than 1 second.
If when arming doors, hood or trunk were open, the siren will sound 4 short signals instead of 1, turn signals will flash 4 times, remote will play ‘WARNING!’ ringtone (after ‘ARMING’ ringtone) and will show troubled zone. This zone sensor will be disabled at that moment. Sensor will be armed again in 15 seconds after the zone was set right.
For emergency arming when engine is running, press and hold VALET button for 3 seconds until the system confirms with red LED indicator flash. A car will be armed in 30 seconds.
Disarming procedure
~~
short
press
press and hold
1 sec.
doors unlocking
system disarming
2 ashes
2 ashes
2x
To disarm the system, shortly press button on the remote. You will hear 2 short siren sounds and will see 2 flashes of turn signals. The remote will play ‘DISARMING’ ringtone and security mode status icon will change to:
11
User manualPandora DXL-0090L service-security system
For disarming without sound confirmation press button for more than 1 second.
If there were new alarming events during the time system was armed, siren will sound 4 times, and turn signals will flash 4 times, the remote will sound ‘WARNING!’ ringtone (after ‘DISARMING’ ringtone) and will indicate zones triggered. All recent alarm events can be viewed in the event history.
Control over system in case of emergency
In case you cannot disarm the system using a remote or tag, owner’s individual PIN-code can be used.
Individual PIN-code is written on the owner’s plastic card under protective layer. Erase the protective layer and use VALET button to input the PIN-code.
1. Using VALET button, input the first digit of the code (press the button a number of times, equal to the first digit; pauses between presses should not exceed 1 second). The system will confirm with red LED indicator flash.
2. Similarly input second, third and fourth digit. Every input will be confirmed with red LED flash.
3. The system will confirm correct PIN-code with red and green flashes of LED indicator. If the input was incorrect, it will be indicated with long red flash. New input can be attempted in 5 seconds.
2-2-2-2
PIN
WARNING! MAKE SURE THAT PROTECTIVE LAYER ON THE OWNER’S PLASTIC CARD IS INTACT AFTER THE SYSTEM INSTALLATION.
WARNING! CAREFULLY REMOVE THE PROTECTIVE LAYER, DO NOT USE SHARP OBJECTS TO AVOID DAMAGING OF HIDDEN INFORMATION UNDER A PROTECTIVE LAYER.
12
User manualPandora DXL-0090L service-security system
4. If the system was armed, it will be disarmed after entering correct PIN-code.
Unlocking the trunk
press and hold 1 sec.
To independently unlock the trunk, no matter if the system is armed or not, press button and
hold it for 1 second.
If the system is armed when this action is performed, the trunk will be disarmed, shock and
supplementary sensors of the trunk will be disabled. All the other security zones will remain armed.
If the trunk was not opened in 15 seconds after using ‘unlock trunk’ command, the system will lock
it again, enable sensors and arm trunk security zone. This will be indicated with 1 flash of turn signals.
Locking/unlocking doors when the engine is running
The system controls doors locking when the engine is running. To lock doors, shortly press
arming button, to unlock doors, press
disarming button.
OFF
ON
ACC
doors locking
short
press
doors unlocking
13
User manualPandora DXL-0090L service-security system
There is an automatic movement lock mode that will lock the doors at the car movement and will unlock them when the ignition is being switched off. Immediately after the ignition is switched off, doors will be unlocked.
When using doors locking mode at the car’s movement start, the system will fix car moving and perform doors locking (it depends on motion sensor sensitivity settings).
When using doors locking mode when the ignition is being switched on, in no less than 5 seconds after the ignition was switched on, the doors will be locked automatically. If any door was opened after the ignition had been switched on, automatic locking will be disabled to prevent locking the keys inside the car.
Car search function
short press
5 ashes
5 ashes
1x
press and hold 1 sec.
To easily find your car on a massive parking, shortly press when the car is armed. The system will sound the siren and flash turn signals 5 times in a row.
To search for car without sound confirmation, press and hold
button for more than 1 second.
Delayed arming (Hands Free mode)
~~
short press
Doors locking, system arming
1 ash
1x
press and hold 1 sec.
1 ash
30 sec.
+
If when leaving the car you cannot arm it using a remote (you have your hands full), you can use delayed arming.
14
User manualPandora DXL-0090L service-security system
To activate this mode, shortly press and simultaneously. LED indicator will turn red, the system will lock doors and will arm in 30 seconds, the siren will sound and turn signals will flash once, indicating that the mode is triggered.
To activate this mode without sound confirmation, press and hold both
and for 1 second
until the sound and vibration signal.
To cancel delayed arming when it is triggered, simply press
.
PANIC mode
+ lights 30 sec.
short press
+
If your car or you are in danger and you want to draw attention to your car, you can use PANIC mode. In this mode the siren will sound and turn signals will flash repeatedly for 30 seconds. To trigger
PANIC mode, press
and simultaneously. To switch it off, press either or .
Remote and automatic engine start
The system allows for remote engine start using remote engine start command or automatic engine start using preconfigured automatic engine start function. Remote start can be used to heat
engine and interior, charge battery or to cool the interior with air conditioning.
Remote and automatic start can only be used when the system is armed.
If the car has manual transmission, remote or automatic start will only occur if programmed neutral procedure was followed when the car was arming.
Remote and automatic engine start on automatic transmission cars will only occur, if transmission selector lever was left in a ‘P’ position.
When using remote and automatic engine start functions, make sure that the car is secured with handbrake or some other means of fixating the car on a parking position.
While system is in remote and automatic start mode, it keeps performing all security functions save for shock sensor, which will have lower sensitivity during engine start and for a short time after while algorithm adjusts to the new normal. To compensate, motion sensor sensitivity, responsiveness and range will be increased. If any security zone will be triggered, the engine will be immediately stopped and alarm mode will be entered. Herewith all immobilizer functions will be activated.
15
User manualPandora DXL-0090L service-security system
Programmable neutral procedure (for cars with manual transmission)
xate the car using a handbrake
leave the car, close the doors
OFF
ON
ACC
short press
in 3 sec. the engine will be stopped, the system is ready to perform remote start
‘engine stop’ ringtone
~~
If you are planning to use remote and automatic engine start on a car with manual transmission,
before arming you will need to perform following actions:
1. While the engine is running, fixate the car with the handbrake and put manual transmission lever (shift-stick) to the neutral position. Programmable neutral procedure will be switched on automatically (it depends on the system settings), press and hold
button for 3 seconds to switch on this program.
2. Turn the key in the ignition lock to the OFF position (the engine should still be running) and take it out of the lock.
3. Leave the car, close the doors.
4. Press
button to arm the car and lock the doors. On LCD remote the engine operation icon
will be spinning and security mode status icon
will light.
5. The engine will be stopped. Now the system is ready to perform remote and automatic engine start.
Remote engine start
If the system is prepared for remote start, to execute it, press and hold
for 3 seconds. Sound
signal will confirm the command, LCD will show flashing engine operation icon
signifying preparation to the engine start. In a few seconds the engine will be started, the remote will play ‘ENGINE START’ ringtone and show spinning engine operation icon
.
Engine operation duration depends on system settings – either heating time or threshold temperature
for engine stop.
Loading...
+ 33 hidden pages