Panasonic SC-XH370, SC-XH300, SC-XH380 User Manual

Operating Instructions

3 ALL

DVD Home Theater Sound System

Model No. SC-XH380

SC-XH370 SC-XH300

Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use.

The illustrations shown may differ from your unit.

Region number The player plays DVD-Video marked with labels containing the region number or “ALL”.

Region Number Example

The Middle East and South Africa 2

Southeast Asia 3

[GA] [GS]

2 ALL

This illustration shows SC-XH380.

RQT9812-G

Indicates features applicable to:

For the Middle East and South Africa

Figure A Figure B

Fuse cover

Figure A Figure B

Fuse (5 ampere)

[XH380] : SC-XH380 only [XH370] : SC-XH370 only [XH300] : SC-XH300 only

System SC-XH380 SC-XH370 SC-XH300

Main unit SA-XH380 SA-XH370 SA-XH300

Speaker system Front speakers SB-HF4800 SB-HF4800 SB-HF3000

Center speaker SB-HC3000 SB-HC3000 SB-HC3000

Surround speakers SB-HS4800 SB-HS4800 SB-HS4000

Subwoofer SB-HW185 SB-HW185 SB-HW185

≥ These operating instructions are applicable to models SC-XH380 , SC-XH370 and SC-XH300 for a variety of regions. Unless

otherwise indicated, illustrations in these operating instructions are of SC-XH380 for the Middle East and South Africa.

≥ Operations in these instructions are described mainly with the remote control, but you can perform the operations on the main unit

if the controls are the same.

Accessories

Please check and identify the supplied accessories.

∏ 1 Remote control

(N2QAYB000853)

∏ 1 Remote control battery

∏ 1 FM indoor antenna

∏ 1 Video cable

∏ 1 HDMI cable

∏ 1 Sheet of speaker cable stickers

∏ 2 AC mains leads

∏ [XH380] [XH370] 1 Speaker cable

[XH300] 5 Speaker cables

∏ [XH380] [XH370] 4 Speaker stands (with cable)

∏ [XH380] [XH370] 4 Bases

∏ [XH380] [XH370] 16 Screws

(When using the moulded three pin mains plug) How to replace the fuse

The location of the fuse differ according to the type of AC mains plug (figures A and B). Confirm the AC mains plug fitted and follow the instructions below. Illustrations may differ from actual AC mains plug.

1. Open the fuse cover with a screwdriver.

2. Replace the fuse and close or attach the fuse cover.

RQT9812

RETURN

VOL

STOP

VOL

INPUT

SKIP

SLOW

PAUSE

PLAY

DVD

USB

EXIT

–REPEAT

PLAY MODE

SOUND

SURROUND FL DISPLAY

1 2 3 4 5 6

7 809

1010

CANCEL

FUNCTIONS

MUTE

SKIP

–SLEEP

RADIO

EXT-IN







 















 

















CH SELECT

–W.SRD



The circled numbers indicated in the operating instructions (e.g. Press [Í]1) correspond to the circled numbers in the above.







1-MIC-2







RQT9812



Control reference guide

Remote control

1 Turn the main unit on/off (B 9) 2 Select channels and title numbers etc. / Enter numbers

(B 10, 12)

3 Cancel (B 13) 4 Source select

[DVD]: Select disc as the source (B 12) [USB]: Select USB as the source (B 16) [EXT-IN, RADIO]:

5 Basic operations for play (B 12) 6 Show on-screen menu (B 14) 7 Show a disc top menu (B 13) 8 Select or confirm menu items / Frame-by-frame (B 12) 9 Select the play mode / Set the repeat mode : Select sound mode, adjust the microphone volume, adjust

the echo level / Turn Whisper-mode Surround on/off (B 12, 16)

; Select surround sound effects (B 11)

Set the Sleep timer

Press and hold [jSLEEP]. While the time is shown on the main unit’s display, press [jSLEEP] repeatedly.

Each time you press the button:

SLEEP 30 # SLEEP 60 # SLEEP 90 # SLEEP120

^-------------------------- OFF (Cancel) (------------------------}

≥ To confirm the remaining time, press and hold the button again.

< TV operations

Aim the remote control at the Panasonic TV and press the button. [TV, Í]: Turn the TV on/off [INPUT, AV]: Change the TV’s video input mode [r, VOL, s]: Adjust the TV volume This may not work properly with some models.

= Adjust the volume of the main unit > Mute the sound

≥ “MUTE” flashes on the main unit’s display while the function is on. ≥ To cancel, press the button again or adjust the volume. ≥ Muting is cancelled when you switch the unit to standby.

? Select radio stations manually (B 10) @ Select preset radio stations (B 10) A Exit the display B Show START menu (B 10) C Show a disc menu (B 13) D Return to previous screen (B 13) E Switch information on the main unit’s display (B 13) F Select speaker channel (B 12)

Select the FM tuner or the external audio as the source (B 10) FM # AUX # ARC # D-IN

^---------------------------------------------}

(B 13, 14)

Avoiding interference with other Panasonic equipment

Other Panasonic audio/video equipment may start functioning when you operate the unit using the supplied remote control. You can operate this unit in another mode by setting the remote control operating mode to “REMOTE 2”.

The main unit and remote control must be set to the same mode.

1 Press [EXT-IN]4 to select “AUX”. 2 Press and hold [< OPEN/CLOSE]2 on the main unit and [2] on the

remote control until the main unit’s display shows “REMOTE 2”.

3 Press and hold [OK]8 and [2] on the remote control for at least 2

seconds. To change the mode back to “REMOTE 1”, repeat the steps above by replacing [2] with [1].

Main unit

1 Standby/on switch (Í/I)

Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.

2 Open/Close the disc tray (B 12) 3 Adjust the volume of the main unit 4 Disc tray 5 Connect microphones (B 16) 6 Connect USB device (B 16) 7 Remote control signal sensor 8 Display (FL display)

POWER-SAVING FEATURES

The main unit is designed to conserve its power consumption and save energy.

∫ Auto power-down function ≥The main unit will automatically switch to standby mode

after 30 minutes of inactivity. e.g. – There is no audio signal from an external device. – Media playback is stopped/paused. – The disc menu is displayed and play is not selected.

(This function may not work depending on the application type of discs.)

≥When the main unit is turned back on, “POWER ON FROM

AUTO POWER DOWN MODE” appears on the main unit’s display.

RQT9812

TABLE OF CONTENTS

Getting Started

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Control reference guide. . . . . . . . . . . . . . . . . . . . . . . . . . .4

POWER-SAVING FEATURES. . . . . . . . . . . . . . . . . . . . .4

step 1 Preparing the speakers . . . . . . . . . . . . . . . . . 6

step 2 Positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

step 3 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Speaker connections . . . . . . . . . . . . . . . . . . . . . .7

Radio antenna connection. . . . . . . . . . . . . . . . . .7

Audio and video connections . . . . . . . . . . . . . . .8

step 4 AC mains lead connection. . . . . . . . . . . . . . . 9

step 5 Preparing the remote control . . . . . . . . . . . . 9

step 6 Easy setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Listening to the radio. . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Presetting stations automatically . . . . . . . . . . . . . . . . . . . . 10

Listening to a preset channel . . . . . . . . . . . . . . . . . . . . . . . 10

Using the START menu . . . . . . . . . . . . . . . . . . . . . . . . . .10

Selecting the source using the remote control . . . . . . . . . . 10

Listening to the TV or other device’s audio from this

unit’s speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Enjoying sound effects from all speakers

Enjoying surround sound effects. . . . . . . . . . . . . . . .11

Selecting sound mode. . . . . . . . . . . . . . . . . . . . . . . . .12

Whisper-mode Surround. . . . . . . . . . . . . . . . . . . . . . .12

Adjusting the speaker level during playback . . . . . .12

Adjusting the front speaker balance

during playback . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Playing Discs

Basic play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Playing from the selected item. . . . . . . . . . . . . . . . . . . . 13

Other modes of play . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Program and Random play . . . . . . . . . . . . . . . . . . . . . . . . 13

Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Using on-screen menus . . . . . . . . . . . . . . . . . . . . . . . . . 14

Other Operations

Linked operations with the TV

(VIERA Link “HDAVI Control

Setting the audio link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Easy control only with VIERA remote control . . . . . . . . . . 16

Enjoying Karaoke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Adding echo effect. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Using Karaoke mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Playing from an USB device. . . . . . . . . . . . . . . . . . . . . . 16

”) . . . . . . . . . . . . . . . . 15

Reference

Changing the player settings . . . . . . . . . . . . . . . . . . . . . 17

Media that can be played . . . . . . . . . . . . . . . . . . . . . . . . 19

Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Speaker installation option. . . . . . . . . . . . . . . . . . . . . . . 20

Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Licenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Safety precautions. . . . . . . . . . . . . . . . . . 25

Getting StartedPlaying DiscsOther OperationsReference

RQT9812

step 1 Preparing the speakers

Make sure you have all the indicated components before starting assembly, setup, and connection.

≥ Keep the screws out of reach of children to prevent swallowing. ≥ For optional wall mount, refer to page 20.

4 Bases 16 Screws2 Front speakers

2 Surround speakers

4 Stands (with cable)





















Slide into the groove.

Tighten securely.

Position the cable between the ridges.

Leave about 180 mm.

Press into the groove.

Tighten securely.

Insert the wire fully.

i: White j: Blue line

Push!

String (not supplied)

Thread from the wall to the speaker and tie tightly.

Speaker (rear)

Screw eye

(not supplied)

Approx. 150 mm

Wall

[XH380] [XH370] Front and Surround speakers

Preparation

≥ To prevent damage or scratches, lay down a soft cloth to assemble speakers. ≥ Do not touch the front area of the speakers. Hold by the sides. ≥ For assembly, use a Phillips-head screwdriver (not supplied).

Preventing the speakers from falling

≥ You will need to obtain the appropriate screw eyes to match the walls or

pillars to which they are going to be fastened.

≥ Consult a qualified building contractor concerning the appropriate

procedure when attaching to a concrete wall or a surface that may not have strong enough support. Improper attachment may result in damage to the wall and speakers, and personal injury.

≥ Use a string of less than ‰2.0 mm, which is capable of supporting over

10 kg.

Caution

≥ Do not stand on the base. Be cautious when children are near.

RQT9812

≥ When carrying the speaker, hold the stand and base parts. ≥ Do not let foreign objects fall inside the speakers.

step 2 Positioning

120°

60°

Center speaker

§2

Front speaker (left)

Subwoofer

§3

Surround speaker (left)

Surround speaker (right)

Front speaker (right)

Main unit

§1

Main unit (rear)

Affix this end of the antenna to a wall or pillar where the reception is best.

FM indoor antenna

(supplied)

How you set up your speakers can affect the bass and the sound field. Note the following points:

≥ Place speakers on flat secure bases. ≥ Keep your speakers at least 10 mm away from the system for proper

ventilation.

≥ Placing speakers too close to floors, walls, and corners can result in

excessive bass. Cover walls and windows with thick curtains.

≥ For optional wall mount, refer to page 20.

Setup example (“Surround layout (Recommended)”: Standard surround placement) Place the front, center, and surround speakers at approximately the same distance from the seating position. The angles in the diagram are approximate.

§1 Position with at least 5 cm of space on all sides for proper ventilation.

§2 Put on a rack or shelf. Vibration caused by the speaker can disrupt

the picture if it is placed directly on the TV.

§3 Place to the right or left of the TV, on the floor or a sturdy shelf so that

it will not cause vibration. Leave about 30 cm from the TV.

Depending on the room layout, you may like to use all the speakers at the front (“Front layout (Alternative)”) (B 9, Easy setup).

Notes on speaker use

≥Use only supplied speakers

Using other speakers can damage the unit, and sound quality will be negatively affected.

≥ Do not touch the front area of the speakers. Hold by the sides. ≥ Do not let foreign objects fall inside the speakers. ≥ You can damage your speakers and shorten their useful life if you play

sound at high levels over extended periods.

≥ Reduce the volume in the following cases to avoid damage:

– When playing distorted sound. – When the speakers are reverberating due to a record player, a

microphone, noise from FM broadcasts, or continuous signals from an

oscillator, test disc, or electronic instrument. – When adjusting the sound quality. – When turning the unit on or off.

≥ These speakers do not have magnetic shielding. Do not place them

near a TV, PC, or other device that is affected by magnetic fields.

≥ Keep magnetized items away. Magnetized cards, watches, etc., can be

damaged if placed too close to the speaker.

step 3 Connections

Turn off all equipment before connection and read the appropriate operating instructions.

Do not connect the AC mains lead until all other connections are completed.

Speaker connections

Pay attention to the type of speaker and the connector colour when you place the speakers.

Speakers (rear)

Use of the speaker cable stickers is convenient when making cable connections. Insert the wire fully, taking care not to insert beyond the wire insulation.

i: White j: Blue line

≥ Be careful not to cross (short circuit) or reverse the polarity of the

speaker wires as doing so may damage the speakers.

Main unit (rear) Connect to the terminals of the same colour.

[XH380]

You can enjoy surround speaker sound wirelessly when you use the optional Panasonic wireless accessory (SH-FX71).

For details, please refer to the operating instructions for the optional Panasonic wireless accessory.

IMPORTANT

The speaker cables supplied with the main unit cannot be used with the optional wireless system.

≥ Remove the cables from the surround speakers (and stands), then

connect using the cables supplied with the optional wireless system. (To insert the cables through the stands, refer to page 20.)

When using the optional wireless system, do not attempt to connect any extra surround speakers to the main unit. When using SH-FX71 (optional), the total RMS Dolby Digital mode power output is changed. (B 23)

Radio antenna connection

FM ANT

(75 )



Use an FM outdoor antenna if radio reception is poor.

Getting Started

Caution

≥ The main unit and supplied speakers are to be used only as

indicated in this setup. Failure to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance.

≥ Do not attempt to attach these speakers to walls using methods

other than those described in this manual.

RQT9812

Audio and video connections

HDMI cable

(supplied)

Main unit (rear)

Be sure to connect to the TV’s ARC compatible terminal. (Refer to the operating instructions for the TV.)

HDMI cable

(supplied)

Optical digital audio cable (not supplied)

Main unit (rear)

AUX

VIDEO OUT

VIDEO IN

VIDEO OUT

AUX

Main unit (rear)

Audio cable

(not supplied)

Video cable

(supplied)

≥ To listen to the TV audio on the sound system, connect the optical

digital audio cable, HDMI Refer to the operating instructions of the respective devices for the

cable or audio cable.

settings necessary to output the audio.

§ Only when connecting to an ARC compatible TV.

Refer to “Connection with an ARC compatible TV” for details. (B below)

Recommended connection to a TV

This connection provides the best picture and audio quality.

VIERA Link “HDAVI Control”

If your Panasonic TV is VIERA Link compatible, you can operate your TV synchronising with home theater operations or vice versa (B 15, Linked operations with the TV).



≥ Do not use any other HDMI cables except the supplied one. ≥ If you use an optional HDMI cable, use the ARC compatible High Speed

HDMI cables. Non-HDMI-compliant cables cannot be utilised.

≥ It is recommended that you use Panasonic’s HDMI cable. When outputting

1080p signal, please use HDMI cables 5.0 meters or less.

≥ Do not make the video connections through the VCR.

Due to copy guard protection, the picture may not be displayed properly.

≥ After connecting with the optical digital audio cable or HDMI§ cable, make

settings to suit the type of audio from your digital equipment (B 11 ). (Only Dolby

Digital and PCM can be played with this connection.)

∫ Connection with an ARC compatible TV

What is ARC?

ARC is an abbreviation of Audio Return Channel, also known as HDMI ARC. It refers to one of the HDMI functions. If the TV is ARC compatible, audio from the TV can be sent to this unit via the HDMI cable without the need to make an extra audio connection.

∫ Connection without an ARC compatible TV

OPTICAL

OUT

DIGITAL AUDIO IN OPTICAL

DIGITAL AUDIO IN

OPTICAL

Alternative connection to a TV

OUT

AV IN

HDMI AV OUT

(ARC)

≥ Refer to the operating instructions of the TV for details.

HDMI (ARC)

OUT

AV OUT

(ARC)

Set Top Box (cable/satellite/Blu-ray Disc player, etc) connection

Use this connection when you want to output the original surround audio from your STB, etc. to this unit.

Connect the optical digital audio cable (not supplied) from the DIGITAL AUDIO IN OPTICAL terminal on the main unit to the OPTICAL OUT terminal on your STB.

≥ If the DIGITAL AUDIO IN OPTICAL terminal is already in use for the TV

audio, reconnect the TV audio to the AUX terminal using an audio cable.



If you have various sound sources (such as Blu-ray Disc player, DVD recorder, VCR, etc.), connect them to the available inputs on the TV and the TV output should then be connected to the AUX, HDMI AV OUT or DIGITAL AUDIO IN OPTICAL terminal of the main unit.

RQT9812

+ 18 hidden pages