Panasonic SC-PM18PC, SC-PM18P User Manual

CD Stereo System
Operating Instructions
Model No. SC-PM18
SC-PM16
P PC
Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference.
SC-PM16 is available in the U.S.A. only.
RQT6683-2P
Dear customer
Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully.
Table of contents
Before use
These operating instructions are applicable to the following systems.
System SC-PM18 SC-PM16
Main unit SA-PM18 SA-PM16
Speakers SB-PM18 SB-PM18
Before use
The model number and serial number of this product can be found on either the back or the bottom of the unit. Please note them in the space provided below and keep for future reference.
MODEL NUMBER
SERIAL NUMBER
User memo:
DATE OF PURCHASE
DEALER NAME
DEALER ADDRESS
TELEPHONE NUMBER
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
CAUTION:
TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Supplied accessories ................................................. 3
IMPORTANT SAFETY INSTRUCTIONS ..................... 4
Listening caution ........................................................ 5
Placement of speakers ............................................... 5
The remote control ..................................................... 5
Connections ................................................................ 6
Front panel controls ................................................... 8
Listening operations
The radio: manual tuning ........................................... 10
The radio: preset tuning ............................................. 11
CDs ............................................................................... 12
Cassette tapes ............................................................. 17
Recording operations
Before recording ......................................................... 18
Recording from the radio ........................................... 19
Recording CDs ............................................................ 19
Timers and others
Using the built-in sound quality settings ................. 20
Enhancing the sound quality ..................................... 20
Using an external unit ................................................ 20
Auto-off function ......................................................... 21
Turning the demo function off ................................... 21
Setting the time ........................................................... 22
Convenient functions ................................................. 22
Using the timers .......................................................... 23
Reference
Troubleshooting guide ................................................. 25
Warranty (ONLY FOR U.S.A.) ....................................... 26
Specifications ................................................................ 27
Product Service .............................................. Back cover
Maintenance ................................................... Back cover
When moving the unit ................................... Back cover
CAUTION!
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
2
RQT6683
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATE­RIALS DO NOT OBSTRUCT THE VENTILATION VENTS.
Supplied accessories
Please check and identify the supplied accessories. Use numbers indicated in parentheses when asking for replacement parts.
(Only for U.S.A.) To order accessories contact 1-800-332-5368 or web site (http://www.panasonic.com).
AC power supply cord ...................................... 1 pc.
(K2CB2CB00006)
FM indoor antenna ............................................ 1 pc.
(RSA0006-L)
AM loop antenna ............................................... 1 pc.
(RSA0033A-1)
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
CAUTION:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Before use
Remote control transmitter .............................. 1 pc.
(EUR7711020)
Remote control batteries................................ 2 pcs.
R6, AA, UM-3
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated
dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
3
RQT6683
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
Before use
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Except for U.S.A.
4
RQT6683
Inside of product
Listening caution
EST. 1924
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and ex­citement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distor­tion— and, most importantly, without affecting your sensi­tive hearing.
We recommend that you avoid prolonged exposure to ex­cessive noise.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts. To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all, we want you listen-
ing for a lifetime.
Placement of speakers
The remote control
Battery installation
R6, AA, UM-3
Before use
Use of batteries
• Align the poles (+ and –) properly when inserting the batteries.
• Do not mix old and new batteries or different types of batteries.
• Do not recharge ordinary dry cell batteries.
• Do not heat or disassemble the batteries. Do not allow them to contact flame or water.
• Remove the batteries if the unit is not to be used for a long time.
• Do not keep together with metallic objects such as necklaces.
• Do not use rechargeable type batteries.
• Do not use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire. If electrolyte leaks from the batteries, consult your dealer. Wash thoroughly with water if electrolyte comes in contact with any part of your body.
Speakers are designed identically so that no left or right channel orientation is necessary.
Notes
• Keep your speakers at least 10mm ( system for proper ventilation.
• These speakers do not have magnetic shielding. Do not place them near televisions, personal computers or other devices easily influenced by magnetism.
• To avoid damage to the speakers, do not touch the speaker cones if you have taken the nets off.
13
/32˝ ) away from the
Correct method of use
Remote control signal sensor
Transmission window
About 7 meters in front of the signal sensor.
Operation notes
• Do not place obstacles between the remote control signal sensor and remote control unit.
• Do not expose the remote control signal sensor to direct sunlight or to the bright light of a fluorescent light.
• Take care to keep the remote control signal sensor and the end of the remote control unit free from dust.
• If this system is installed in a rack with glass doors, the glass doors’ thickness or color might make it necessary to use the remote control unit a shorter distance from the system.
To prevent damage
• Never place heavy items on top of the unit.
• Do not disassemble or reconstruct the unit.
• Do not spill water or other liquids into the unit.
5
RQT6683
Before use
R
L
LOW (6
)
HIGH (6
)
1
2
(R)
1
Adhesive
tape
FM indoor
antenna
1
Connections
• Plug the AC power supply cord into a household AC outlet only after all other connections have been made.
• To prepare the AM loop antenna wire and speaker cords, twist the vinyl cover tip and pull off.
1 2
(L)
1 Connect the FM indoor antenna.
3
4
Tape the antenna to a wall or column, in a position where radio signals are received with the least amount of interference.
Note
For the best reception:
An FM outdoor antenna is recommended. (\ page 7)
2 Connect the AM loop antenna.
Stand the antenna up on its base. Keep loose antenna cord away from other wires and cords.
3 Connect the speaker cords.
A Confirm the colors of the tags on the ends of the
cords.
2
2
B For White tags:
Connect cords to gray terminals. For Blue, Black and Red tags: Connect cords so tag colors match the terminal
colors. Cords with white and blue tags are for high frequency. Cords with red and black tags are for low frequency.
Incorrect connection can damage the unit.
Caution
Use only the supplied speakers.
The combination of the main unit and speakers provide the best sound. Using other speakers can damage the unit and sound quality will be negatively affected.
6
RQT6683
AM loop antenna
Caution
Use the speakers only with the
recommended system. Failure to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance.
Do not attach these speakers to walls
or ceilings.
B
Gray (+) Blue (–)
Black (–)
Red (+)
A
1
Black (
3
Red (
2
ªª
ª)
ªª
··
·) Black (
··
White Blue Black
Red
··
·)
··
Red (
4 Connect the AC power supply cord.
Note
The included AC power supply cord is for use with this
ªª
ª)
ªª
unit only. Do not use it with other equipment.
3
A
Connections
B
C
FM outdoor antenna (not included)
(1
3/16"
1
2
AM outdoor antenna (not included)
5-12 m
(16-40 ft)
AM loop antenna (included)
(R)
19
(
/32"
)
Shield braid
)
Core wire
Optional antenna connections
You may need an outdoor antenna if you use this system in a mountainous region or inside a reinforced-concrete building, etc.
FM outdoor antenna
A
Disconnect the FM indoor antenna if an FM outdoor antenna is installed.
Note
An outdoor antenna should be installed by a qualified technician only.
AM outdoor antenna
B
Connect the outdoor antenna without removing the AM loop antenna. Run 5 to 12 m of vinyl-covered wire horizontally along a window or other convenient location.
Note
When the unit is not in use, disconnect the outdoor antenna to prevent possible damage that may be caused by lightning. Never use an outdoor antenna during an electrical storm.
External unit connections
• Make sure that the power supply for all components has been turned off before making any connections.
• For details, refer to the operating instructions of the unit which is to be connected.
• All peripheral components and cables sold separately.
Before use
"LINE OUT"
position
Analog player (not included)
(L)
AUX
Rear panel of this unit
L
R
Connecting analog equipment
C
This example shows how to connect an analog player with a PHONO OUT/LINE OUT switch. When units other than those described are to be connected, please consult your audio dealer.
Note
• Only an analog player with a built-in phono equalizer can be connected.
• Set the switch to the “LINE OUT” position at the back of the analog player.
7
RQT6683
Before use
3
4
5
6
7
8
1
POWER
OPEN
AC IN
2
9 !
AUX REC
S.SOUND EQ
FF
STOP
DEMO
REW
CD 1 CD 2 CD 3 CD 4 CD 5
CD CHECK
TUNER BANDCDTAPE
VOLUME
DOWN
UP
OPEN/CLOSE
CD CHANGE
" #
$
%
&
PHONES
(
)~+,
Front panel controls
Main unit
Cassette lid
1 2
Cassette open button (c OPEN) ............................ 17
3
AC supply indicator (AC IN)
This indicator lights when the unit is connected to the AC mains supply.
4
Standby/on switch (
Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.
5
Aux button (AUX) ..................................................... 20
6
CD skip/search, tape fast-forward/rewind/TPS, tune/ preset channel select, time adjust buttons
33
(f
3 /FF, g
33
7
CD check button (CD CHECK) ................................ 13
8
CD trays
9
Tape indicator
This indicator changes in the following manner:
a
Orange (when no cassette is inserted.)
b
Green (when cassette is inserted.)
c
Red (when in recording mode.)
Ä
Display
Å
Recording start/pause button ([/ J REC) .............. 19
Ç
Super sound EQ button (S.SOUND EQ) ................. 20
É
Volume control (VOLUME DOWN, UP) ....... 10, 12, 17
Ñ
CD tray open/close button (c OPEN/CLOSE) ....... 12
Ö
CD change button (c CD CHANGE) ....................... 13
Ü
Headphone jack (PHONES) ..................................... 20
á
Stop/program clear and demonstration button
(STOP L, –DEMO) ............................ 12, 16, 17, 19, 21
à
Tuner/band select button (TUNER/BAND) ............. 10
â
Cassette play button (TAPE 2 ) .............................. 17
ä
CD play/pause button (CD 2/ J ) ............................. 12
ã
Disc direct play buttons (CD 1~CD 5) .................... 12
POWER)
44
4/REW ) ................ 10, 11, 12, 17, 22
44
8
RQT6683
STOP
DEMO
CD 1 CD 2 CD 3 CD 4 CD 5
TUNER BANDCDTAP E
-
4
. /
: ;
~ 5
<
#
=
AUTO OFF
DISC
PLAY MODE
TUNER/
BAND
BAND
VOL
MUTING
S.SOUND EQS.SOUND EQ
PRESET EQ
SLEEP
1
4
7
PGM
CD
CLEAR
AUX
PLAY
CLOCK
REC
TIMER
23
65
89
10
0
TAPE
VOL
FF
REW
DIMMER
DISPLAY
> ?
@
,
+
[
$
6
\ ]
Front panel controls
Remote Control
Buttons such as 4 function in exactly the same way as the buttons on the main unit.
å
Sleep timer/auto off button
(SLEEP, –AUTO OFF) ........................................ 21, 24
ç
Disc button (DISC) ................................................... 14
é
Play mode select button
(PLAY MODE) ......................................... 10, 14, 15, 19
Use this for selecting repeat mode, CD play mode, tune mode, FM mode and AM beat proof function.
è
CD Program, tuner preset button (PGM) ......... 11, 16
ê
Muting button (MUTING) ........................................ 22
ë
Preset EQ select button (PRESET EQ) ................. 20
í
Play timer/recording timer button
˚˚
(
˚PLAY/REC) ...........................................................23
˚˚
ì
Clock/timer button (CLOCK/TIMER) ........... 22, 23, 24
î
Numeric buttons ( 10, 1–9, 0)........................... 11, 15
ï
Stop/program clear button (L CLEAR)...... 12, 16, 17
ñ
Dimmer button (DIMMER) ....................................... 22
ó
Display button (DISPLAY) ....................................... 15
Before use
9
RQT6683
Loading...
+ 19 hidden pages