Panasonic SC-BTT405, SC-BTT433, SC-BTT465, SC-BTT785 User Manual

GNGSGA
<Operations>
Blu-ray DiscTM Home Theater Sound System
Model No. SC-BTT785
SC-BTT465 SC-BTT433 SC-BTT405
Unless otherwise indicated, illustrations in these operating instructions are of SC-BTT785.
Firmware updates
Panasonic is constantly improving the unit’s firmware to ensure that our customers are enjoying the latest technology. Panasonic recommends updating your firmware as soon as you are notified. For details, refer to “Firmware updates” (> 14) or http://panasonic.jp/support/global/cs/ (This site is in English only.)
Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use.
Please also read through the “Owner’s Manual <Setup>”.
VQT5F61
Precautions
WARNING
Unit
To reduce the risk of fire, electric shock or product damage,
Do not expose this unit to rain, moisture, dripping or splashing.
Do not place objects filled with liquids, suc h as vases, on this uni t.
Use only the recommended accessories.Do not remove covers.Do not repair this unit by yourself. Refer servicing to qualified
service personnel.
Do not let metal objects fall inside this unit.Do not place heavy items on this unit.
AC mains lead
To reduce the risk of fire, electric shock or product damage, Ensure that the power supply voltage corresponds to the
voltage printed on this unit.
Insert the mains plug fully into the socket outlet.Do not pull, bend, or place heavy items on the lead.Do not handle the plug with wet hands.Hold onto the mains plug body when disconnecting the plug.Do not use a damaged mains plug or socket outlet.
The mains plug is the disconnecting device. Install this unit so that the mains plug can be unplugged from the socket outlet immediately.
Speaker
To prevent injury, this apparatus must be securely attached to the wall in accordance with the installation instructions.
Small object
Keep the screws out of reach of children to prevent swallowing.
CAUTION
Unit
This unit utilizes a laser. Use of controls or adjustments or
performance of procedures other than those specified herein may result in hazardous radiation exposure.
Do not place sources of naked flames, such as lighted candles,
on this unit.
This unit may receive radio interference caused by mobile
telephones during use. If such interference occurs, please increase separation between this unit and the mobile telephone.
[For\Australia\and\New\Zealand]
This unit is intended for use in moderate climates.
[Except\Australia\and\New\Zealand]
This unit is intended for use in tropical climates.
Placement
Place this unit on an even surface.
To reduce the risk of fire, electric shock or product damage, Do not install or place this unit in a bookcase, built-in cabinet or
in another confined space. Ensure this unit is well ventilated.
Do not obstruct this unit’s ventilation openings with
newspapers, tablecloths, curtains, and similar items.
Do not expose this unit to direct sunlight, high temperatures,
high humidity, and excessive vibration.
Speaker
Use only supplied speakers
The main unit and su pplied speakers are to be used onl y as indicated in these operating instructions. Failure to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Con sult a qualified service person if damage has occurred or if you experience a sudd en change in perfo rmance.
Be careful not to cross (short-circuit) or reverse the polarity of
the speaker wires as doing so may damage the speakers.
Hold the speaker firmly to avoid injury by dropping the speaker
when carrying.
You can damage your speakers and shorten their useful life if
you play sound at high levels over extended periods.
Do not touch the front area of the speakers. Hold by the sides.Place speakers on flat, secure surfaces.To avoid injury by falling or dropping the speaker, place the
speaker cables with care not to stumble or hook.
Do not stand on the spe aker. Be cautious when childre n are near.
Batteries
Mishandling of batteries can cause electrolyte leakage and may cause a fire. Danger of explosion if battery is incorrectly replaced. Replace
only with the type recommended by the manufacturer.
When disposing of the batteries, please contact your local
authorities or dealer and ask for the correct method of disposal.
Do not mix old and new batteries or different types at the same time.
Do not heat or expose to flame.Do not leave the battery(ies) in a car exposed to direct sunlight
for a long period of time with doors and windows closed.
Do not take apart or short circuit.Do not recharge alkaline or manganese batteries.Do not use batteries if the covering has been peeled off.
Remove batteries if you do not intend to use the remote control for a long period of time. Store in a cool, dark place.
VQT5F61
2
To dispose or transfer this unit
Fuse cover
Figure A Figure B
Figure A Figure B
Fuse (5 ampere)
Fuse
(5 ampere)
The unit may keep the user settings information in the unit. If you discard this unit either by disposal or transfer, then follow the procedure to return all the settings to the factory presets to delete the user settings. (> 34, "To return all settings to the factory preset.")
The operation hi story may be re corded in the mem ory of this unit.
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.
Restriction on use of unauthorized copied content
This unit adopts the following technology for copyright protection.
Cinavia Notice This product uses Cinavia technology to limit the u se of unauthorized copies of some commercially-pro duced film and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be displayed and playback or co pying will be interrupted. More information about Cinavia tec hnology is provided at the Cinavia Online Consumer Information Center at http: //www.cinavia.com. To request additional information a bout Cinavia by mai l, send a postcar d with your mailing address to: Cinavia Consumer Information Center, P.O. Box 86851, San Diego, CA, 92138, USA.
AC Mains Lead
(For the AC mains plug of three pins) How to replace the fuse
The location of the fuse differ according to the type of AC mains plug (figures A and B). Confirm the AC mains plug fitted and follow the instructions below. Illustrations may differ from actual AC mains plug.
1 Open the fuse cover with a screwdriver.
2 Replace the fuse and close or attach the fuse cover.
VQT5F61
3
Table of contents
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Getting started
Package contents and accessories . . . . . . . . 5
Unit and media care . . . . . . . . . . . . . . . . . . . . 6
Playable media . . . . . . . . . . . . . . . . . . . . . . . . 7
Control reference guide . . . . . . . . . . . . . . . . . 9
Setting up the system . . . . . . . . . . . . . . . . . . 11
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Inserting or removing media . . . . . . . . . . . . . 14
Enjoying TV with the speakers
of the system. . . . . . . . . . . . . . . . . . . . . . . . . 14
HOME menu . . . . . . . . . . . . . . . . . . . . . . . . . 15
Multi User Mode . . . . . . . . . . . . . . . . . . . . . . 16
Playback
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Enjoying Bluetooth
®
. . . . . . . . . . . . . . . . . . . 19
TV & Radio
“HDMI CEC” . . . . . . . . . . . . . . . . . . . . . . . . . 21
Listening to the Radio. . . . . . . . . . . . . . . . . . 22
Advanced operations
Enjoying Network Service. . . . . . . . . . . . . . . 23
Option menu . . . . . . . . . . . . . . . . . . . . . . . . . 24
Setup menu. . . . . . . . . . . . . . . . . . . . . . . . . . 26
Speaker installation option . . . . . . . . . . . . . . 32
Reference
Troubleshooting guide . . . . . . . . . . . . . . . . . 34
Specifications . . . . . . . . . . . . . . . . . . . . . . . . 39
Limited Warranty
(ONLY FOR AUSTRALIA) . . . . . . . . . . . . . . 43
VQT5F61
4
Getting started
(SA-BTT465)
(SA-BTT433)
FRONT
(SB-HFS4810)
SURROUND
(SB-HFS4010)
SUBWOOFER
(SB-HW4010)
CENTER
(SB-HC4010)
FRONT
(SB-HFS433)
SUBWOOFER
(SB-HW186)
CENTER
(SB-HC433)
SURROUND
(SB-HFS433)
(SA-BTT405)
FRONT
(SB-HFS4010)
SUBWOOFER
(SB-HW4010)
CENTER
(SB-HC4010)
SURROUND
(SB-HFS4010)
(SA-BTT785)
SUBWOOFER
(SB-HW6010)
FRONT
(SB-HFS4810)
SURROUND
(SB-HFS4810)
CENTER
(SB-HC4010)
(SH-FX77)
Main unit
Main unit
Main unit
(Speaker cables)
(Speaker cables)
(Screws)
(Speaker cable)
(Bases)
(Stands)
(Speakers)
(Speakers)
(Stands)
(Bases)
(Screws)
(Speaker cables)
Wireless system
Main unit
(Speakers)
(Base stands)
(Screws)
(Speaker cable)
(Speaker cables)
Package contents and accessories
Check the package contents and supplied accessories before using this unit.
Package contents
Getting startedPlaybackTV & RadioAdvanced operationsReference
VQT5F61
5
Accessories
1 Remote control
(N2QAYB000970)
Unit and media care
Clean this unit with a soft, dry
cloth
Never use alcohol, paint thinner or benzine to
clean this unit.
Before using chemically treated cloth, carefully
read the instructions that came with the cloth.
2 Batteries for remote control
AC mains lead
See page 11 for more information.
1 HDMI cable
1 FM indoor antenna
1 Sheet of speaker cable sticker
Product numbers provided in these operating instructions
are correct as of February 2014. These may be subject to change.
Do not use AC mains lead with other equipment.
This unit’s lens
Lens cleaner: RP-CL720AE This lens cleaner may not be for sale
depending on the region.
This lens cleaner is sold as specific for DIGA,
but can be used on this unit as well.
Clean discs
DO DO NOT
Wipe with a damp cloth and then wipe dry with a dry cloth.
Disc handling precautions
Handle discs by the edges to avoid inadvertent
scratches or fingerprints on the disc.
Do not attach labels or stickers to discs.Do not use disc cleaning sprays, benzine,
thinner, static electricity prevention liquids or any other solvent.
Do not use the following discs:
– Discs with exposed adhesive from removed
stickers or labels (rented discs, etc.). – Discs that are badly warped or cracked. – Irregularly shaped discs, such as heart
shapes.
VQT5F61
6
Playable media
BD
DVD
CD
USB
Device Media markings Device types Contents format
BD-Video Video
BD-RE Video, JPEG, MPO
BD-R Video, MKV, Xvid
DVD-Video Video
Getting started
DVD-R
DVD-R DL
DVD-RW
See pages 8 and 40 for more information on the types of content that can be played.
+R/+RW/+R DL
Music CD Music [CD-DA]
CD-R
CD-RW
USB devices
(up to 2 TB)
Video, AVCHD, MKV, Xvid, JPEG, MPO, AAC, FLAC, MP3, WAV, WMA
Video, AVCHD
MKV, Xvid, JPEG, MPO, AAC, FLAC, MP3, Music [CD-DA], WAV, WMA
MKV, MP4, MPEG2, Xvid, JPEG, MPO, AAC, FLAC, MP3, WAV, WMA
VQT5F61
7
Types of discs that cannot be
324
played by this unit
Any other disc that is not specifically supported or previously described.
DVD-RAMSuper Audio CDPhoto CDDVD-AudioVideo CD and Super Video CDHD DVD
Region management information
The unit can playback BD-Video/DVD-Video discs of the following regions codes, including “ALL”:
Example:
BD-Video DVD-Video
[For\South\East\Asia]
[For\the\Middle\East]
[For\Australia\and\New\Zealand]
Finalize
Any DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW that are recorded by a recorder need to be finalized by the recorder to play on this unit. Please refer to the recorder’s instructions.
Music CD
Operation and sound quality of CDs that do not comply with CD-DA specifications (copy control CDs, etc.) cannot be guaranteed to work.
USB device
This unit does not guarantee connection with all
USB devices.
This unit does not support USB device
charging.
FAT16, FAT32, and NTFS file systems are
supported.
This unit supports USB2.0 High Speed.This unit supports an HDD formatted in FAT32
and NTFS. If the HDD is not recognized, the power to the HDD may not be supplied. Supply power from an external source.
BD-RE, BD-R
Discs recorded in DR mode using Panasonic Blu-ray Disc recorders may not play back the audio etc., correctly.
It may not be possible to play the above media in some
cases due to the type of media, the condition of the recording, the recording method, and how the files were created.
The producers of the disc can control how discs are
played, so you may not always be able to control play as described in these operating instructions. Read the disc’s instructions carefully.
BD-Video
This unit supports high bit rate audio (Dolby® Digital Plus, Dolby Resolution Audio adopted in BD-Video.
®
TrueHD, DTS-HD High
TM
and DTS-HD Master AudioTM)
3D
3D videos and 3D still pictures can be played back when this unit is connected to a 3D compatible TV using a High Speed HDMI Cable.
VQT5F61
8
Control reference guide
モヷ
ヴヵヰヱ
リワヱヶヵ
ユヹリヵ
ヴユロユヤヵヰン
ヴレリヱ
ヱロモヺ
ヱモヶヴユ
ヴユモンヤラ ヴユモンヤラ
ヴロヰヸ
ヴレリヱ
モヶュリヰ
ンユヵヶンワ
ヱリヱ
21
10
23
24
15
22
1
6
20
19
2
7
8
9
11
12 13
5
16
18
17
25
14
3 4
R6/LR6, AA
(Alkaline or manganese batteries)
Remote control
Using the remote control
Insert the batteries to the terminal so that it (i and j) matches those in the remote control.
Point it at the remote control signal sensor on this unit. (> 10)
1 Turn the unit on and off 2 Select title numbers, etc./Enter numbers 3 Cancel 4 Select Bluetooth
®
/Enable pairing (> 20) 5 Select an audio or video source 6 Basic playback control buttons (> 17) 7 Select preset radio stations (> 22) 8 Show the status messages (> 18) 9 Show the Home Screen of the Network
Service (> 23)
10 [3,4,2,1] : Move the highlight for selection
[OK] : Confirm the selection
;1
) : Frame-by-frame (>17)
( 11 Show Option menu (> 24) 12 Coloured buttons (red, green, yellow, blue)
Used for various purposes depending on the
display 13 Set the sound effects (> 25) 14 Set the sleep timer
1 Press [SLEEP].
2 While “SL ££” is displayed on the unit’s
display, press [SLEEP] several times to select the time (in minutes).
Timer selection is up to 120 minutes.
Select “OFF” on the unit’s display to disable
the function.
To confirm the remaining time
Press the button again.
15 TV operation buttons
[Í TV]: Turn the TV on and off
[AV, INPUT]: Switch the input select
[ijVOL] : Adjust the volume 16 Adjust the volume of the main unit 17 Change audio (> 17) 18 Mute the sound
“MUtE” flashes on the unit’s display, while
the function is on.
To cancel, press the button again or adjust
the volume.
Muting is cancelled if the unit is turned off. 19 Switch Secondary Video on/off
(Picture-in-picture) (> 24) 20 Select radio stations manually (> 22) 21 Exit the Menu screen 22 Show HOME menu (> 15) 23 Show Pop-up Menu/Top Menu (> 18) 24 Return to previous screen 25 Show Setup menu (> 26)
VQT5F61
Getting started
9
Main unit (Front)
1 2 3 4 85 6 7
e.g., [BTT785]
WIRELESS LINK
12
3 4
Top Rear
10
1 Disc tray 2 Display
Unit’s display list (> 38)
3 Remote control signal sensor
Distance: Within approx. 7 m.
Angle: Approx. 20e up and down, 30e left and right 4 Open or close the disc tray (> 14) 5 Adjust the volume of the main unit
Main unit (Rear)
1 AC IN terminal 2 Speaker terminals 3 Cooling fan 4 AUX terminal
[BTT785] Wireless system
1 Wireless link indicator
2 Enable pairing 3 Speaker terminals 4 AC IN terminal
4231 5 67
6 Stop (> 17) 7 Start play (> 17) 8 USB port (> 14) 9 Standby/on switch (Í/I) (> 13)
Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.
10 NFC touch area (> 20)
5 LAN port (> 12) 6 HDMI AV OUT (ARC) terminal 7 DIGITAL AUDIO IN terminal 8 FM radio antenna terminal
Green lights: Wireless link is activated.
brinks (slow): Searching mode brinks (fast): Pairing mode
Red lights: Sleeping mode
89
10
VQT5F61
Setting up the system
OPTICAL
OUT
e.g.,
Optical digital audio cable
(not supplied)
Set Top Box, etc.
Follow the “Owner’s Manual <Setup>” to set up the system first.
Precautions
Speakers
Keep your speakers at least 10 mm away from
the system to avoid noise generated by resonance.
For optional wall mount, refer to page 32.
Centre speaker
Put it on a rack or shelf not to interfere with the
TV’s various sensors (ambient light, etc.). Vibration caused by the speaker can disrupt the picture if it is placed directly on the TV.
Surround speakers
Place the speakers at the same height or higher
than ear level.
[BTT785] Wireless system
To avoid interference, separate the wireless
system from the other electronic devices that use the same radio frequency (2.4 GHz band).
Place the wireless system within approximately
10 m from the main unit.
To allow for proper ventilation and to maintain good airflow around the wireless system, position it with at least 5 cm of space on all sides.
Do not use the wireless system in a metal
cabinet or bookshelf.
AC mains lead
[For\the\Middle\East\and\South\East\Asia]
Use the AC mains lead that matches the socket for the area you live in.
Saudi Arabia: 3-pin AC mains lead
The wireless system ([BTT785]) and this unit
consume a small amount of AC power (> 39, 40) even when turned off in standby mode. For the purpose of energy conservation, the unit should be disconnected if you will not be using it for extended period of time.
Other device connection
Getting started
HDMI
If you use an optional HDMI cable, use the
ARC* compatible High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized. It is recommended that you use Panasonic’s HDMI cable. When outputting 1080p signal, please use HDMI cables 5.0 meters or less.
* ARC is an abbreviation of Audio Return Channel, also
known as HDMI ARC. This feature allows a home theatre system to receive and play audio from the TV through a single HDMI cable without additional wiring.
DIGITAL AUDIO IN
The dual audio cannot be changed. Change the
setting on the connected device.
VQT5F61
11
Connecting to the network
Wireless router, etc.
Internet
LAN Cable (not supplied)
Internet
Broadband router, etc.
The following services can be used when this unit is connected to broadband.
Firmware can be updated (> 14)You can enjoy BD-Live (> 18)You can enjoy Network Service (> 23)
For details about connection method, refer to the instructions supplied with the connected equipment.
Wireless LAN connection
For wireless capability, connect the Wireless LAN Adaptor DY-WL5 (optional).
Read the operating instructions for DY-WL5 thoroughly when using it.
used.
A wireless LAN connection can be used only in those countries where the wireless function is
authorized for use. Use of a wireless LAN connection is prohibited in the regions where DY-WL5 is not sold.
For up-to-date compatibility information on your wireless router, refer to
http://panasonic.jp/support/global/cs/ (This site is in English only.)
The unit is not compatible with public wireless LAN services provided in airports, stations, cafes, etc.
LAN cable connection
Only DY-WL5 can be
Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.Inserting any cable other than a LAN cable in the LAN port can damage the unit.
12
VQT5F61
Settings
OK
RETURN
Easy Network Setting
Wired
Wireless
Select a connection mode.
The following settings can be performed anytime in the Setup menu. (> 28, 29)
Easy Settings
After connecting your new home theatre for the first time and pressing [Í], the basic settings screen will appear.
Preparation Turn on the TV and select the appropriate video input.
1 Press [Í].
Setup screen appears.
2 Follow the on-screen instructions to
continue with the settings.
[BTT785]
To use the wireless system, pairing is
required. Follow the on-screen instructions to pair the unit with the wireless system.
[BTT785]
The wireless link indicator of the wireless system lights
green when the unit and the wireless system are connected wirelessly.
Easy Network Setting
After completing “Easy Settings”, you can perform “Easy Network Setting”.
Select “Wired” or “Wireless” and press [OK].
About the wireless connection
Before beginning wireless connection setup
Obtain your network name (SSID*).If your wireless connection is encrypted, please
be sure that you know your encryption key.
If your SSID is not displayed;
Search again by pressing the red button on the
remote control.
Stealth SSIDs will not be displayed; in this case,
enter manually by using “Manual setting”. While displaying the HOME menu, press [SETTINGS]
> select “Network” and press [OK] > select “Network Settings” and press [OK] > select “Wireless Settings” and press [OK] > select “Connection Setting” and press [OK] > select “Manual setting” and press [OK]
If your wireless network is encrypted;
Encryption Key input screen will be displayed. Input the encryption key of your network.
If your wireless router supports WPS (Wi-Fi Protected Setup
You can easily set up a connection by pressing the green button on the remote control.
Refer to the operating instructions of the hub or router.Do not use this unit to connect to any wireless network for
which you do not have usage rights. Using these networks may be regarded as illegal access.
If you have trouble getting online on your PC after
performing network settings on this unit, perform the network settings on your PC.
Please be aware that connecting to a network without
encryption may result in the leaking of data such as personal or secret information.
* SSID:
An SSID (Service Set IDentification) is a name used by wireless LAN to identify a particular network. Transmission is possible if the SSID matches for both devices.
TM
);
Getting started
Follow the on-screen instructions to establish your connection settings. If “Wireless LAN Adaptor is not connected.” is
displayed, check that the Wireless LAN Adaptor is fully inserted. Alternatively, disconnect and reconnect it.
VQT5F61
13
Firmware updates
Firmware Update
Current Version: X.XX
New Version: X.XX
Do you want to start firmware update? For the update information, please visit the following website: http://panasonic.net/support/
Yes No
OK
RETURN
OPEN/CLOSE
Occasionally, Panasonic may release updated firmware for this unit that may add or improve the way a feature operates. These updates are available free of charge.
This unit is capable of checking the firmware automatically when connected to the Internet via a broadband connection. When a new firmware version is available, the following message is displayed.
DO NOT DISCONNECT the unit from the AC power or perform any operation while the update is in process. After the firmware is installed, “FIn” will be displayed on the unit’s display. Unit will restart and the following screen will be displayed.
The firmware was updated. Current Version
:
x.xx
Inserting or removing media
When inserting a media item, ensure that it is
facing the correct way, which is the right side facing up.
Enjoying TV with the speakers of the system
Press [SELECTOR] several times to select the appropriate external input mode. (> 15)
Reduce the volume on the TV to its minimum,
and then adjust the volume of the main unit.
RETURN
If downloading on this unit fails or this unit is not
connected to the Internet, then you can download the latest firmware from the following website and burn it to a CD-R to update the firmware. http://panasonic.jp/support/global/cs/ (This site is in English only.) To show the firmware version on this unit. (> 31, “Firmware Version Information”)
Downloading will require several minutes. It may take
longer or may not work properly depending on the connection environment.
If you do not want to check for the latest firmware version,
set “Automatic Update Check” to “Off”. (> 31)
VQT5F61
14
Loading...
+ 30 hidden pages