Panasonic DMC-TZ50 Users Manual

Operating Instructions

Digital Camera

Model No. DMC-TZ5

DMC-TZ4
DMC-TZ50

Before connecting, operating or adjusting this product, please read

the instructions completely.

For USA assistance, please call: 1-800-211-Pana(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo

For Canadian assistance, please call: 1-800-99-LUMIX (1-800-995-8649) or
send e-mail to: [e-mail]

PCP

VQT1P79-3

Dear Customer,

Thank you for choosing Panasonic!

You have purchased one of the most
sophisticated and reliable products on the
market today. Used properly, we’re sure
it will bring you and your family years of
enjoyment. Please take time to fill in the
information below.
The serial number is on the tag located
on the underside of your Camera. Be sure
to retain this manual as your convenient
Camera information source.

Model No.

Serial No.

Information for Your Safety

WARNING:

TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK OR PRODUCT
DAMAGE,

• DO NOT EXPOSE THIS APPARATUS
TO RAIN, MOISTURE, DRIPPING
OR SPLASHING AND THAT NO
OBJECTS FILLED WITH LIQUIDS,
SUCH AS VASES, SHALL BE
PLACED ON THE APPARATUS.

• USE ONLY THE RECOMMENDED
ACCESSORIES.

• DO NOT REMOVE THE COVER
(OR BACK); THERE ARE NO USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

Carefully observe copyright laws.
Recording of pre-recorded tapes or
discs or other published or broadcast
material for purposes other than your
own private use may infringe copyright
laws. Even for the purpose of private
use, recording of certain material may
be restricted.

A lithium ion/polymer battery that is recyclable powers the product you
have purchased. Please call 1-800-8-BATTERY for information on how
to recycle this battery.

THE SOCKET OUTLET SHALL BE
INSTALLED NEAR THE EQUIPMENT
AND SHALL BE EASILY ACCESSIBLE.

CAUTION

Danger of explosion if battery is
incorrectly replaced. Replace only
with the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according to
the manufacturer’s instructions.

Warning

Risk of fire, explosion and burns. Do not
disassemble, heat above 60 °C (140 °F)
or incinerate.

Product Identification Marking is located
on the bottom of units.

THE FOLLOWING APPLIES ONLY IN
THE U.S.A.

FCC Note: (U.S. only)

This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits
are designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses, and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does
cause harmful interference to radio
or television reception, which can be
determined by turning the equipment off
and on, the user is encouraged to try to
correct the interference by one or more
of the following measures:

• Reorient or relocate the receiving
antenna.

• Increase the separation between the
equipment and receiver.

• Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.

• Consult the dealer or an experienced
radio/TV technician for help.

FCC Caution: To assure continued

compliance, follow the
attached installation
instructions and use only
shielded interface cables
with ferrite core when
connecting to computer or
peripheral devices.

Any changes or modifications not
expressly approved by the party
responsible for compliance could void
the user’s authority to operate this
equipment.

Declaration of Conformity
Trade Name: Panasonic
Model No.: DMC-TZ5

DMC-TZ4
DMC-TZ50
Responsible party: Panasonic

Support Contact:

This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference,
and (2) this device must accept any
interference received, including
interference that may cause undesired
operation.

THE FOLLOWING APPLIES ONLY IN
CANADA

This Class B digital apparatus complies
with Canadian ICES-003.

Corporation of North
America
One Panasonic Way,
Secaucus, NJ 07094
Panasonic Consumer
Electronics Company
1-800-211-PANA (7262)

DMC-TZ5

DMC-TZ4

DMC-TZ50

2 VQT1P79 VQT1P79 3

-If you see this symbol­Information on Disposal in other

Countries outside the European
Union

This symbol is only valid in the
European Union. If you wish to discard
this product, please contact your local
authorities or dealer and ask for the
correct method of disposal.

About the battery pack

Battery pack (Lithium ion battery pack)

• Use the specified unit to recharge the

battery pack.

• Do not use the battery pack with

equipment other than the specified
unit.

• Do not get dirt, sand, liquids, or other

foreign matter on the terminals.

• Do not touch the plug terminals (+ and

−) with metal objects.

• Do not disassemble, remodel, heat or

throw into fire.
If any electrolyte should come into
contact with your hands or clothes, wash
it off thoroughly with water.
If any electrolyte should come into
contact with your eyes, never rub the
eyes. Rinse eyes thoroughly with water,
and then consult a doctor.

About the battery charger

CAUTION!
DO NOT INSTALL OR PLACE THIS
UNIT IN A BOOKCASE, BUILT­IN CABINET OR IN ANOTHER
CONFINED SPACE. ENSURE THE
UNIT IS WELL VENTILATED. TO
PREVENT RISK OF ELECTRIC
SHOCK OR FIRE HAZARD DUE
TO OVERHEATING, ENSURE
THAT CURTAINS AND ANY OTHER
MATERIALS DO NOT OBSTRUCT THE
VENTILATION VENTS.

Battery charger

This battery charger operates on AC
between 110 V and 240 V.
But

• In the U.S.A. and Canada, the battery
charger must be connected to a 120 V
AC power supply only.

• When connecting to an AC supply
outside of the U.S.A. or Canada, use
a plug adaptor to suit the AC outlet
configuration.

Quick start guide

The battery is not charged
when the camera is
shipped. Charge the
battery and set the clock
before use.

When you do not use the
card (sold separately), you
can record or play back
pictures on the built-in
memory (P.18).

Charge the battery

1

Insert the battery
and the card

2

Turn on the power

3

Set REC/PLAY
switch to

4

Set the mode dial
to

5

Press the shutter button and
take pictures

6

Note

Example screens displayed in this manual are for DMC-TZ5 model.

10:00

MAR.

MAR.

15.200810:00

15.2008

100–0001100–0001

1/ 9

1/9

DMC-TZ4:

To play back the pictures

1. Set REC/PLAY
switch to .

2. Select the picture
you want to view.

Previous Next

4 VQT1P79 VQT1P79 5