Panasonic CQ-SRX7000N User Manual

SD/CD Player/Receiver with Dot Matrix LCD and CD Changer Control

CQ-SRX7000N

Operating Instructions

¡Please read these instructions carefully before using this product and save this manual for future use.
¡Bitte lesen Sie diese Bedienungsanleitung vor der Verwendung dieses Produktes aufmerksam durch und bewahren Sie sie danach

für spätere Nachschlagzwecke sorgfältig auf.

¡Prière de lire ces instructions attentivement avant d’utiliser le produit et garder ce manuel pour l’utilisation ultérieure.
¡Leest u deze instructie alstublieft zorgvuldig door voor u dit product in gebruik neemt en bewaar deze handleiding voor later gebruik.
¡Läs igenom denna bruksanvisning noga innan produkten tas i bruk. Spara bruksanvisningen för framtida behov.
¡Si prega di leggere attentamente queste istruzioni prima di usare questo prodotto e di conservare questo manuale per usi futuri.
¡Lea con atención estas instrucciones antes de utilizar el producto y guarde este manual para poderlo consultar en el futuro.

Bedienungsanleitung

Manuel d’instructions

Gebruiksaanwijzing

Bruksanvisning

Manuale di istruzioni

Manual de Instrucciones

Bedienungsanleitung

Manuel d’instructions

Gebruiksaanwijzing

Bruksanvisning

Manuale di istruzioni

Manual de Instrucciones

VOL

MENU

BAND

SET/AUTO·P

REMOTE

PTY

DISP

SUB·W

OPEN

SOURCE

TA

PWR

AF

DIM

SPC

MUTE

TUNE

TRACK

P-SET

DISC

CH·C

1 2

EON PTY CT

SD

/C

D RECEIVER

W

ITH FU

LL DOT M

A

TR

IX DISPLAY

DAB CO

N

TR

OL

CQ-SRX7000N

TM

TEXT

2

CQ-SRX7000N

Contents

Page

Precautions ................................................... 4

Components.................................................. 5

General .......................................................... 6

Radio.............................................................. 8

Radio Data System (RDS) ............................ 10

CD Player....................................................... 16

SD Player ....................................................... 18

Mesures de précaution................................112

Éléments constitutifs...................................113

Généralités ...................................................114

Autoradio ......................................................116

Réception radio RDS ...................................118

Lecteur de CD ..............................................124

Lecteur de SD...............................................126

Voorzorgen...................................................166

Componenten...............................................167

Algemeen......................................................168

Radio.............................................................170

Radio Data Systeem (RDS) .........................172

CD-speler......................................................178

SD-speler ......................................................180

Observera .................................................... 220

Medföljande delar ....................................... 221

Allmänt......................................................... 222

Radiomottagning ........................................ 224

RDS (Radio Data System) .......................... 226

CD-spelare................................................... 232

SD-spelare ................................................... 234

Precauzioni.................................................. 274

Componenti................................................. 275

Generali ....................................................... 276

Radio............................................................ 278

RDS (Radio Data System) .......................... 280

Lettore CD ................................................... 286

Lettore SD.................................................... 288

Precauciones .............................................. 328

Componentes.............................................. 329

Generalidades ............................................. 330

Radio............................................................ 332

Sistema da datos

radiofónicos (RDS) ............................... 334

Reproductor de CD..................................... 340

Inhaltsverzeichnis

Seite

Vorsichtsmaßnahmen .................................. 58

Komponenten.............................................. 59

Allgemeines................................................... 60

Radio.............................................................. 62

Radio-Daten-System (RDS)-Empfang ......... 64

CD-Spieler ..................................................... 70

SD-Spieler...................................................... 72

Table des matières

Page

Inhoudsopgave

Bladzijde

Innehåll

Sida

Contenuto

Pag.

Indice

Pag.

3

CQ-SRX7000N

CD Changer ................................................... 22

Various Settings............................................ 24

About SD ....................................................... 38

Installation..................................................... 40

Anti-Theft System ......................................... 43

Electrical Connections ................................. 44

Speaker Connections ................................... 48

Fuse ............................................................... 48

Maintenance .................................................. 48

Troubleshooting............................................ 51

Specifications ............................................... 57

CD-Wechsler ................................................. 76

Verschiedene Einstellungen........................ 78

Über SD.......................................................... 92

Einbau............................................................ 94

Diebstahlschutz ............................................ 97

Elektrischer Anschluß.................................. 98

Anschluß der Lautsprecher ....................... 102

Sicherung .................................................... 102

Pflege ........................................................... 102

Störungsbeseitigung.................................. 105

Technische Daten........................................ 111

Changeur de CD...........................................130

Réglages divers ...........................................132

A propos de SD............................................146

Installation....................................................148

Système antivol ...........................................151

Branchements électriques..........................152

Branchment des haut-parleurs...................156

Fusible ..........................................................156

Entretien .......................................................156

En cas de difficulté ......................................159

Données techniques....................................165

CD-wisselaar ................................................184

Diverse instellingen.....................................186

Over SD........................................................ 200

Installatie ..................................................... 202

Anti-diefstal systeem.................................. 205

Elektrische aansluitingen .......................... 206

Aansluitingen luidsprekers........................ 210

Zekering....................................................... 210

Onderhoud .................................................. 210

Verhelpen van storingen............................ 213

Technische gegevens................................. 219

CD-växlarstyrning....................................... 238

Olika inställningar....................................... 240

Om SD.......................................................... 254

Montering .................................................... 256

Stöldskyddsanordning............................... 259

Elektriska anslutningar .............................. 260

Anslutning av högtalare............................. 264

Säkring......................................................... 264

Underhåll ..................................................... 264

Felsökning................................................... 267

Tekniska data .............................................. 273

Cambia CD................................................... 292

Impostazioni varie ...................................... 294

Circa la SD................................................... 308

Installazione ................................................ 310

Sistema antifurto ........................................ 313

Collegamenti elettrici ................................. 314

Collegamenti degli altoparlanti ................. 318

Fusibile ........................................................ 318

Manutenzione.............................................. 318

Correzione dei difetti di

funzionamento ......................................... 321

Dati tecnici................................................... 327

Reproductor de SD ..................................... 342

Cambiador de discos CD ........................... 346

Ajustes diversos ......................................... 348

Información sobre SD ................................ 362

Instalación ................................................... 364

Sistema antirrobo ....................................... 367

Conexiones eléctricas................................ 368

Conexiones de los altavoces..................... 372

Fusible ......................................................... 372

Mantenimiento ............................................ 372

Solución de problemas .............................. 375

Especificaciones......................................... 381

4

CQ-SRX7000N

1

E
N

G

L

I
S
H

Laser Product

Label Indications and Their Locations

DANGER!

Invisible laser radiation
when open. Avoid direct
exposure to beam.

Caution: This product utilizes a laser.
Use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.

Laser products:

Wave Length 780 nm
Laser Power No hazardous radiation is emitted with safety protection.

Do not take apart this unit or attempt to make any changes
yourself.

This unit is a very intricate device that uses a laser pickup to retrieve infor­mation from the surface of compact discs. The laser is carefully shielded
so that its rays remain inside the cabinet.
Therefore, never try to disassemble the player or alter any of its parts
since you may be exposed to laser rays and dangerous voltages.

CLASS 1 LASER PRODUCT

Caution Label

DANGER! Invisible laser radiation when
open. Avoid direct exposure to beam.

ADVARSEL! Usynligt laserlys udstråles
ved åbning. Undgå direkte bestråling.

VARO! Avattaessa ja suojalukitus ohitet­taessa olet alttiina näkymättömälle
lasersäteilylle. Älä katso säteeseen.

VARNING! Osynlig lasersträlning när
denna del är öppnad och spärren är urkop­plad. Betrakta ej strälen.

ADVERSEL! Usynlig laserstråling når
deksel åpnes og sikkerhedslås brytes.
Unngå eksponering for strålen.

Deck Ass’y
(Upper Side)

Volume Level

For your driving safety, keep the volume level low enough
to be aware of road and traffic conditions.

Car Washing

To avoid electrical shorts which may cause fire, or other
damage, do not expose this product (including the speak­ers, CDs and SD Memory Card) to water or excessive
moisture.

Car Ventilation

If your car is parked for several hours in direct sunlight, the
temperature inside the car may become very high. It is
advisable to drive the car and give the interior a chance to
cool down before switching the unit on.

Power Supply

This product is designed to be used in a car having a 12­Volt negative ground battery system.

Disc Mechanism

Do not insert coins or any small objects. Keep screwdrivers
and other metallic objects away from the disc mechanism
and disc. Never load an SD Memory Card into the CD slot.
Otherwise the main unit or the SD Memory Card might be
damaged.

Service

This product is made of precision parts. Do not attempt to
disassemble or adjust any parts. For repair, please consult
your nearest authorized Panasonic Service Center.

Note: The preset memory is cleared to return to the origi­nal factory setting when the power connector or battery is
disconnected.

Precautions

Panasonic welcomes you to their constantly growing family of electronic products owners.
We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully
selected components, and assembled by people who are proud of the reputation their work has built for our company.
We know this product will bring you many hours of enjoyment, and after you discover the quality, value and reliability
we have built into it, you too will be proud to be a member of our family.

¡APPREIL À LASER DE CLASSE
¡KLASS 1 LASER APPARAT
¡LUOKAN 1 LASERPLAITE

VORSICHT! UNSICHTBARE LASERSTRAHLUNG!
WENN ABDECKUNG GEÖFFNET IST, NICHT DEM
LASERSTRAHL AUSSETZEN.

5

CQ-SRX7000N

2

E
N

G

L

I
S
H

Components

Remote Control Preparation

(Back side)

Lithium battery

Position B

Position A

Battery holder

Battery Installation

1. Remove the battery holder.
Pull the holder out at position B while pushing position A as indicated.

2. Install the battery on the battery holder.
Place the battery in the holder with its (+) side upwards as shown.

3. Insert the battery holder.
Push in the battery holder back into its original position.

Battery Notes

Remove and dispose of an old battery immediately.
Battery Information:

¡Battery Type: Panasonic lithium battery (CR2025) (Included)
¡Battery Life: Approximately 6 months under normal use (at room temperature)

Caution: Improper use of batteries may cause overheating, an explosion or
ignition, resulting in injury or a fire. Battery leakage may damage the unit.

¡Do not disassemble or short the battery. Do not throw a battery into a fire.
¡Keep batteries away from children to avoid the risk of accidents.
¡Follow local regulations when disposing of batteries.

Components

• Operating Instructions ........................................................................................1

• Supplied Hardware...................................................................1 set (a page 40)

• Remote Control...................................................................................................1

• Lithium Battery (CR2025)...................................................................................1

• Warranty Card.....................................................................................................1

VOL

MENU

BAND

SET/AUTO

·P

R

E

M

O

T

E

P

T

Y

DISP

SUB·W

O

PEN

SOURCE

TA

PWR

AF

DIM

SPC

MUTE

TUNE

TRACK

P-SET

DISC

C

H

·C

1

2

EON PTY CT

SD

/CD

R

E

CE

IVER

W

ITH

FU

LL DO

T M

ATRIX DISP

LAY

DAB CONTROL

CQ-SRX7000N

DIM

VOL

M

E

NU

MUTE

SOURCE

DISP

6

CQ-SRX7000N

3

E
N
G

L

I
S
H

Note : When you use this unit

for the first time, a demonstration
message appears on the display.

To cancel this display, press

[DISP]

.

Power

ON : Press [SOURCE].

Volume

[VOL}] : Up
[VOL{] : Down

Note : The sound level for each source is

stored in memory.
(For radio, one volume setting for AM, one vol­ume setting for all FMs)

Note : When the power is switched on by pressing

and holding

[SOURCE] for more than 4 seconds, a

demonstration message appears on the display.

To cancel this display, press [DISP].

(When ACC selection is set to ON a page 36)

Setting Range : 0 to 40

Turn the key in the ignition until the accessory indicator
lights.

General

[VOL}] [VOL{] (Volume)

[DISP] (Display)

[MUTE]

(Mute/Attenuation)

[SOURCE]

(Power/Source)

[VOL}] [VOL{]

(Volume)

[DISP] (Display)

[MUTE]

(Mute/Attenuation)

[SOURCE] (Power/Source)

[DIM] (Dimmer)

OFF : Press [SOURCE] again and hold for more than

1 second.
A security message is displayed, and the warning
alarm that reminds you to take the panel and the
SD Memory Card is activated.
(When S-LED is set to ON

a page 36)

Note : When ACC selection is set to ON, security mes-

sage and warning alarm are performed after turning off
the ignition key. (

a page 36 about ACC selection)

Source

Press [SOURCE] to change the source.

(When a CD is in the player a page 16)

(When a SD Memory Card is in the

(When a optional CD changer is

(When AUX-IN setting is set to ON)

(When optional DAB tuner is connected

a

for DAB control, please refer to the attached

Radio CD Player

SD Player

Auxiliary

CD Changer

DAB

connected and magazine is in the(a page 36)

Operation Guide for CY-DAB2000N)

player a page 18)

(

a page 8)

changer

a page 22)

Note : Connect to external devices.

7

CQ-SRX7000N

4

E
N
G

L

I
S
H

Mute/Attenuation

ON : Press [MUTE].
OFF : Press again.

Decreasing volume range depends on setting.
(Mute/Attenuation setting

a page 36)

: No sound

: Decrease the volume to

1/10 of previous level.

When Power is ON

Press [DISP].

Display Change

Mode Display *1

Mode & Spectrum
Analyzer Display

When Power is OFF (when ACC Selection is set to ON)

Press [DISP].

Clock Display

(Back light is on) (Back light is off)

Display OFF

Spectrum Analyzer Display *2

Display OFF *3 Mode & Clock Display

AUDIO Indicator

*1 The title information can be

displayed in the CD/SD/CD
Changer mode. (

a page 17,

21 and 23)

*2 If you press a button, the

Mode & Spectrum Analyzer
Display appears for 5 sec­onds.

*3 If you press a button, the

light is turned on, the Mode
Display appears, and the
light is turned off approxi­mately 5 seconds later.

Notes :

¡Set the Spectrum Analyzer pattern in a separate procedure. (a page 34)
¡“NO CT” is displayed before adjusting the clock. (Adjustment a page 34)

Press and hold [DISP] for more than 2 seconds.
Indicators which are not displayed on Mode Display are displayed.
(Sound, sound space and SD data information etc.)

Press

[DISP] again to cancel.

Note : See page 36 about ACC Selection setting.

Dimmer

Press [DIM] on the main unit to change the dimmer level.

DIMMER 1

DIMMER 2

DIMMER 3

: Brighter (Default)

: Medium

: Darker

VOL

MENU

BAND

SET/AUTO

·P

REMOTE

PTY

DISP

SUB·W

OPEN

SOURCE

TA

PWR

AF

DIM

SPC

MUTE

TUNE

TRACK

P

-SE

T

D

IS

C

CH·C

1

2

EO

N PTY

CT

SD/CD RECEIVER WITH FULL DOT MATRIX DISPLAY

DAB CONTROL

CQ-SRX7000N

P-SET

DISC

BAND

SOURCE

TUNE

TRACK

M

E

NU

8

CQ-SRX7000N

5

E
N
G

L

I
S
H

Radio Mode Display

Radio Mode

Press [SOURCE] to select the radio
mode.

Band

Press [BAND].

Note: The stereo indicator lights during

reception of an FM stereo broadcast.

1

2

Tuning

[TUNE[] / [[] : Up
[TUNE]] / []] : Down

Press and hold

[TUNE[] or [TUNE]] /

[[] or []]

for more than 0.5 seconds,

then release. Seeking will start.

3

FM1

FM2

FM3

AM (LW/MW)

Radio

[BAND]

(Band/Auto preset memory/Set)

[SOURCE]

(Source)

[TUNE]] [TUNE[] (Tune)

[P·SET}] [P·SET{] (Preset station/Select)

[SOURCE] (Source)

[}] [{]

(Preset station/Select)

[1] to [6] (Preset station)

[BAND]

(Band/Auto preset memory/Set)

[]] [[] (Tune)

Band

Frequency

Stereo Indicator

Mono/Local Selection

MONO ON : Noise is significantly decreased when weak signals are received

from an FM broadcast station.

LOCAL ON : In seek tuning, only strong stations are detected.
LOCAL OFF : Relatively weak stations are picked up.

q Press [MENU] / [SEL] during radio (FM or AM) mode.
w Press [P·SET}]

or [P·SET{] / [}] or [{] to select MONO or LOCAL.

(In AM mode, only LOCAL can be selected.)

e Press [BAND] to switch on or off in turn.

Notes:

¡If no keys have been pressed for more than 15 seconds, the display returns to the previous one after changing to the

menu display.

¡Press [DISP] to return to the regular mode.

FM Menu Display

AM Menu Display

[MENU] (Menu)

[SEL] (Menu)

9

CQ-SRX7000N

6

E
N
G

L

I
S
H

Up to 6 stations can be stored in each of the FM1, FM2, FM3 and AM (LW/MW) band selections.

Manual Preset
Memory

Manually save a station in
the preset memory.

Select a band and frequency (step

q, w and e on the previous page)

q Press and hold [P·SET}] or [P·SET{] / [}] or [{] for more

than 2 seconds until the preset number blinks.

w Press [P·SET}] or [P·SET{] / [}] or [{] to select a preset

number.

e Press and hold [P·SET}] or [P·SET{] / [}] or [{] for more

than 2 seconds to memorize.

The display blinks once, and a receiving
station is saved in the memory.

Note: Frequency setting can be performed even after selecting a preset

number.

Entering numbers directly from the remote control

Select a band and frequency (step q, w and e on the previous page)
Press and hold

[1] to [6] on the remote control for more than 2 seconds.

Auto Preset
Memory

Automatically save strong
stations in the preset
memory.

Select a band (step

q, w on the previous page)

Press and hold

[BAND] for more than

2 seconds.

¡The 6 strongest available stations will be automatically saved in the memory

under preset numbers 1

to 6.

¡Once set, the preset stations are sequentially scanned for 5 seconds each.
¡To stop the scanning, press [P·SET}]

or [P·SET{] / [}] or [{].

(Pressing [1] to [6] on the remote control also can stop the scanning.)

Preset Station
Calling

Select a band (step q, w on the previous page)

Press

[P·SET}] or [P·SET{] / [}] or [{] to select the preset number

for tuning in the preset station.

Press

[1] to [6] on the remote control.

Note: New stations are overwritten on existing saved stations after following this procedure.

Entering numbers directly from the remote control

One-touch Selection of a Preset Station

Scanning

10

CQ-SRX7000N

7

E
N
G

L

I
S
H

Radio Data System (RDS)

RDS Basics

Some FM stations are broadcasting added data compatible with RDS. This radio set offers convenient functions using such
data.
RDS service availability varies with areas. Please understand if RDS service is not available in your area, the following ser­vice is not available, either. This chapter explains the summary and operation regarding RDS.
The following functions are available when receiving RDS stations.

Program Service Name (PS)
Display

The name of station is displayed.

Alternative Frequency (AF)

When reception is poor, an RDS station broadcasting the
same program is tuned in automatically.

Best Station

Best Station Research is automatically activated to store
the station with the best reception for each preset button.

Traffic Program (TP)

Some RDS FM stations periodically provide traffic infor­mation.
The program which broadcast the traffic information is
called Traffic Program (TP).

Traffic Announcement (TA)

Radio announcements on traffic conditions.

Clock Time (CT) Service

When receiving an RDS station, the CT (Clock Time)
service automatically adjusts the time.
"––:––" is displayed in areas where CT service is not
available. (a Page 34 for Clock Adjustment)

Program Type (PTY) Display

RDS FM stations provide a program type identification
signal.
Example: news, rock, classical music, etc.

VOL

MENU

BAND

SET/AUTO

·P

REMOTE

PTY

DISP

SUB

·W

OPEN

SOURCE

TA

PWR

AF

DIM

SPC

M

UTE

TUNE

TRACK

P-SET

DISC

CH·C

1

2

E

O

N

P

T

Y

C

T

SD/CD RECEIVER WITH FULL DOT MATRIX DISPLAY

D

A

B

C

O

N

T

R

O

L

CQ-SRX7000N

DIM

P-SET

DISC

M

E

N

U

BAND

SOURCE

TUNE

TRACK

11

CQ-SRX7000N

8

E
N
G

L

I
S
H

Alternative Frequency (AF)

Alternative Frequency (AF) mode

Press and hold [DIM] on the main unit
for more than 2 seconds to switch the AF
mode on or off.

Default : AF ON

Auto Preset Memory

When AF ON is selected, only
RDS stations will be memo­rized automatically.

(a Page 9 for auto preset
memory)

* New stations are overwritten

on existing saved stations
after following this proce­dure.

[}]

(Select)

[{]

(Select)

[SEL]

(Menu)

Preset buttons

[BAND]

(Set)

AF Level and Region (REG) Mode

AF Level

Press [BAND] to change the AF level.

Program Identification (PI) Seek

(Only for remote control)

If Best Station does not work properly and reception is poor when
tuning in a preset station, press the same preset number button
again. PI Seek will search an AF station with good reception.

q Press [MENU] / [SEL] to display the menu.
w Press [P·SET}] or [P·SET{] / [}] or [{] to select an item.

AF 1

Low level AF sensitivity

REG Mode

Changes the selection range of AF and PI Seek.
Press [BAND] to switch on or off in turn.

AF 2

High level AF sensitivity

[BAND] (Set)

[P·SET{] [P·SET}] (Select)

[MENU]

(Menu)

[DIM] (AF mode)

REG ON

REG OFF

The frequency is changed only for programs
within the region.

The frequency is changed also for programs
outside the region.

FM Menu Display

When AF is on

(Default)

(Default)

Note

:

When REG mode is switched from ON to OFF or vise versa, AF mode turns on automatically.

VOL

MENU

BAN

D

SET/AUTO

·P

REMOTE

PTY

DISP

SUB

·W

OPEN

SOURCE

TA

PWR

AF

DIM

SPC

M

UTE

TUNE

TRACK

P-SET

DISC

CH·C

1

2

E

O

N

P

T

Y

C

T

SD/CD RECEIVER WITH FULL DOT MATRIX DISPLAY

D

A

B

C

O

N

T

R

O

L

CQ-SRX7000N

VOL

MENU

BAND

TA

TUNE

TRACK

12

CQ-SRX7000N

9

E
N
G

L

I
S
H

Radio Data System (RDS) (continued)

Traffic Announcement (TA)

Traffic Announcement (TA) mode

[]]

(TP seek tuning)

[[]

(TP seek tuning)

[BAND]

(TP auto preset memory)

TP Seek Tuning

When TA ON is selected, only
traffic program will be searched.
Press and hold [TUNE[] or
[TUNE]] / [[] or []] for
more than 0.5 seconds, then
release. Seeking will start.

TP Auto Preset Memory

When TA ON is selected, only
traffic program will be memo­rized automatically.
Press and hold [BAND] for
more than 2 seconds.

* New stations are overwritten

on existing saved stations
after following this procedure.

TA on

TA off

Press [TA] on the main unit to switch the TA
mode on or off.
Searches for and tunes into traffic information
broadcasts automatically when set to TA on.

TA Volume Set

While listening to an FM station
(including a traffic information
announcement), press and hold
[TA] on the main unit for more
than 2 seconds to store the vol­ume level as the TA Volume level.

Muting in TA mode

To listen to only traffic information
announcements. While listening to
an FM station which is not current­ly broadcasting traffic information,
press [VOL{] to set the volume
to 0. The traffic information
announcement will be output at the
TA volume level.

[TA]

(TA mode/Volume set)

[VOL}] [VOL{] (Volume)

[VOL}] [VOL{] (Volume)

[TUNE]] [TUNE[] (TP seek tuning)

[BAND] (TP auto preset memory)

When TA is on

When Traffic Information is received

TA Standby Mode

When set to TA on with the unit in another mode (CD, CD changer,
etc.), it will automatically switch to radio mode and output the traffic
information.
When the traffic information has finished, the unit will return to the
previous mode.

VOL

MENU

BAND

SET/AUTO

·P

REMOTE

PTY

DISP

SUB

·W

OPEN

SOURCE

TA

PWR

AF

DIM

SPC

MUTE

TUNE

TRACK

P-SET

DISC

CH

·C

1

2

E

O

N

P

T

Y

C

T

SD/CD RECEIVER WITH FULL DOT MATRIX DISPLAY

D

AB

C

O

N

T

R

O

L

CQ-SRX7000N

M

EN

U

BAND

TUNE

TRACK

13

CQ-SRX7000N

10

E
N
G

L

I
S
H

Program Type (PTY) Reception

Program Type (PTY) mode

PTY on

PTY off

Press and hold [MENU] / [SEL] for more than 2
seconds to switch the PTY display mode on or off.

PTY Selection

q Press [TUNE[] / [[] to change the program type as

shown on the right. ([TUNE]] / []] : opposite direc­tion)

w Select the desired program and press [BAND]. Seek will

start to tune in to a station broadcasting the selected pro­gram type.

SPEECH / MUSIC / NEWS / AFFAIRS /
INFO / SPORT / EDUCATE / DRAMA /
CULTURE / SCIENCE / VARIED / POP M /
ROCK M / EASY M / LIGHT M / CLASSICS /
OTHER M / WEATHER/ FINANCE / CHILDREN /
SOCIAL / RELIGION / PHONE IN / TRAVEL /
LEISURE / JAZZ / COUNTRY / NATION M /
OLDIES / FOLK M / DOCUMENT/ SPEECH

PTY Language Selection

q Press [MENU] / [SEL] to display the DISPLAY LANGUAGE

menu and press [BAND].

w Press [P·SET}] or [P·SET{] / [}] or [{] to select

the PTY display language, and press [BAND].

[SEL]

(PTY mode/Menu)

[}]

(Select)

[{]

(Select)

[]]

(PTY select)

[[]

(PTY select)

[BAND]

(PTY search/Set)

[BAND]

(PTY search/Set)

[TUNE]] [TUNE[] (PTY select)

[MENU]

(PTY mode/Menu)

[P·SET{] [P·SET}] (Select)

PTY Mode Display

Note: When there is no corresponding program type, “NONE” is displayed for 2 seconds.

VOL

MENU

BAND

SET/AUTO

·P

REMOTE

PTY

DISP

SUB

·W

OPEN

SOURCE

TA

PWR

AF

DIM

SPC

M

UTE

TUNE

TRACK

P-SET

DISC

CH

·C

1

2

E

O

N

P

T

Y

C

T

SD/CD RECEIVER WITH FULL DOT MATRIX DISPLAY

D

A

B

C

O

N

T

R

O

L

CQ-SRX7000N

P-SET

DISC

BAND

TUNE

TRACK

14

CQ-SRX7000N

11

E
N
G

L

I
S
H

Radio Data System (RDS) (continued)

Program Type (PTY) Reception

PTY Preset Call

Program types are stored in memory under preset memory number 1 to 6 as shown in the table on the next
page. To select the desired program type, press [P·SET}] or [P·SET{] / [}] or [{].

PTY Preset Change

q Select the desired program type by using PTY Selection or

PTY Preset Call.

w Press and hold [P·SET}] or [P·SET{]/ [}] or [{]

for more than 2 seconds to select the preset memory
mode.

e Press [P·SET}] or [P·SET{]/ [}] or [{] to select

the desired preset number.

r Press and hold [P·SET}] or [P·SET{] / [}] or [{]

for more than 2 seconds to memorize.

Preset PTY Search

q Select a program type by PTY preset call.
w Press [BAND] to tune in the desired program

type station.

Preset buttons

[BAND]

(Preset PTY search)

[P·SET{] [P·SET}] (PTY preset call/Change)

[}]

(PTY preset call

/Change)

[{]

(PTY preset call/Change)

[BAND]

(Preset PTY search)

*On the remote control, press and hold the preset buttons

for more than 2 seconds.

Note: When there is no corresponding program

type, “NONE” is displayed for 2 seconds.

Preset Number

Program Type

15

CQ-SRX7000N

12

E
N
G

L

I
S
H

Program Type (PTY) Reception

Other RDS functions

PTY Preset (Default)

Preset No. Program Type When PTY search is activated, these program type is receivable.

1 NEWS NEWS

2 SPEECH AFFAIRS, INFO, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED,

WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE IN,
TRAVEL, LEISURE, DOCUMENT

3 SPORT SPORT

4 POP M POP M

5 CLASSICS CLASSICS

6 MUSIC ROCK M, EASY M, LIGHT M, OTHER M, JAZZ, COUNTRY, NATION M,

OLDIES, FOLK M

Enhanced Other Network (EON)

When EON data is received, the EON indicator lights and
the TA and AF functions are expanded as follows.
TA : Traffic information from the current and other net-

work stations can be received.

AF : The frequency list of preset RDS stations is updat-

ed by EON data.
EON enables the radio to make fuller use of RDS informa­tion. It constantly updates the AF list of preset stations,
including that currently tuned in to. For example, if you
preset a station far from home, you will later be able to
receive the same station at an alternative frequency, or
any other station serving the same program. EON also
keeps track of locally available TP stations for quick
reception.

Emergency Announcement
Reception

When an emergency announcement is broadcast, the unit
is automatically switched to receiving that broadcast.
(Even when in CD mode, CD changer mode, etc.). During
receiving the emergency announcement, "ALARM" blinks
on the display.

Open the Front Panel

Press [OPEN] on the front panel.

Disc Insert

Playback starts. Close the front panel.

Notes :

¡Do not insert a disc when indicator lights.
¡Loading a CD when the power is off allows the

power to be turned on. (When ACC Selection is
set to ON a

page 36)

¡Ejecting the CD when the unit is in the CD mode

allows the mode returns to the previous one.

16

CQ-SRX7000N

13

E
N
G

L

I
S
H

CD Player Mode Display

When CD is in the player

Press [SOURCE] to select the CD player mode
and playback starts.

Track Selection

[TRACK2] / [[] : Next track
[TRACK1] / []] : Beginning of the current

track
Previous track (Press
twice.)

Track Search

Press and hold.

[TRACK2] / [[] : Fast forward
[TRACK1] / []] : Fast reverse

1

2

To Stop and Eject the Disc

Open the front panel and press [uCD

]

Cautions:

¡

Never load an SD Memory Card into the CD slot. Otherwise the main unit or the SD Memory Card might be damaged.

¡Be sure to close the front panel while CD playback.
¡To avoid damaging the front panel, do not push it down or place objects on it while it is open.
¡Do not use irregularly shaped CDs.
¡

Do not pinch your finger or hand in the front panel. Do not insert foreign matter into the disc and card slots.

[DISP] (Return)

[BAND] (Set)

[SOURCE] (Source)

[TRACK 1] [TRACK2] (Track)

[MENU]

(Menu)

[P·SET}] [P·SET{] (Select)

[4] (Random)

[6] (Repeat)

[SEL] (Menu)

[]] [[] (Track)

[DISP]

(Return)

[5] (Scan)

[SOURCE]

(Source)

[}] [{]

(Select)

[BAND]

(Set)

CD Player

Label Side

Track Number

Play Time

When a CD is inside

(Blinks during CD play)

Scan, Random and
Repeat Indicator

VOL

U

N

E

M

Y

T

P

·P

E

O

T

T

O

U

M

E

/A

R

T

SE

DAB CONTROL

BAND

CH·C

2

1

T

E

-S

P

E

TUN

K

AC

TR

C

IS

D

O

E

MUTE

SD/CD RECEIVER WITH FULL DOT MATRIX DISPLAY

T

C

Y

T

P

N

·P

REMOTE

SET/AUTO

D

BAND

BAND

·C

CH

2

P-SET

DISC

DISC

TUNE

TUNE

TRACK

TRACK

1

MUTE

VOL

U

EN

MENU

M

PTY

P-SET

OPEN

P

IS

Q-SRX7000N

C

D

A

T

R

W

P

E

C

R

U

O

S

IM

D

AF

C

P

S

·W

B

U

S

CQ-SRX7000N

L

O

TR

N

O

C

B

A

SUB

SD/CD RECEIVER WITH FULL DOT MATRIX DISPLAY

T

C

Y

T

P

N

O

E

OPEN

DISP

DISP

TA

PWR

SOURCE

SOURCE

DIM

AF

SPC

·W

17

CQ-SRX7000N

14

E
N
G

L

I
S
H

CD Mode Setting

q Press [MENU] / [SEL] during CD playing.
w Press [P·SET}]

or [P·SET{] / [}] or [{] to select an item.

e Press [BAND] to switch on or off in turn.

Repeat Play

Play Settings

Notes:

¡If no keys have been pressed for more than 15 seconds, the display returns to the previous one after changing to the

menu display.

¡Press [DISP] to return to the regular mode.

Select

REP

: Repeat the current selection.

: Cancel

OFF

ON

Title Display

Title Information

Select

TITLE

: Display
: No display

¡“NO TITLE” is displayed when there is no information.
¡When the title display is set to ON, the mode display appears.

OFF

ON

Title Scroll

Select

TITLE SCROLL

: Continuous scroll
: Scroll stops after a circle scroll

Press and hold

[BAND] for more than 2

seconds to have an another circle scroll.

OFF

ON

Random Play

Select

RAND

: All the available tracks are played in a random

sequence.

: Cancel

OFF

ON

Scan Play

Select

SCAN

: The first 10 seconds of each track play in

sequence.

: Cancel

OFF

ON

Direct play setting from remote control when the menu is not displayed

Press [4] (Random) / [5] (Scan) / [6] (Repeat) on the remote control. Press again to cancel.

CD Menu Display

VOL

MENU

BAND

SET/AUTO

·P

REMOTE

PTY

DISP

SUB

·W

OPEN

SOURCE

TA

PWR

AF

DIM

SPC

M

UTE

TUNE

TRACK

P-SET

DISC

CH

·C

1

2

E

O

N

P

T

Y

C

T

SD/CD RECEIVER WITH FULL DOT MATRIX DISPLAY

D

A

B

C

O

N

TR

O

L

CQ-SRX7000N

P-SET

DISC

DISP

SOURCE

TUNE

TRACK

18

CQ-SRX7000N

15

E
N
G

L

I
S
H

VOL

M

E

N

U

BAND

S

E

T

/A

U

T

O

·P

R

E

M

O

T

E

PT

Y

D

ISP

SU

B·W

OPEN

S

O

U

R

C

E

T

A

PW

R

AF

D

IM

S

P

C

MUTE

TUN

E

TR

AC

K

P

-S

E

T

D

IS

C

CH·C

1

2

E

O

N

P

T

Y

C

T

SD/CD RECEIVER WITH FULL DOT MATRIX DISPLAY

DAB CONTROL

C

Q

-S

R

X7000N

Open the Front Panel

Press [OPEN] on the front panel.

Memory Card Insert

q Load a card by pushing the center of the

back of the card until it is locked.

w Playback starts. Close the front panel.

Notes :

¡Loading an SD Memory Card when the power

is off allows the power to be turned on. (When
ACC Selection is set to ON a

page 36)

¡Ejecting the SD Memory Card when the unit is

in the SD mode allows the mode returns to the
previous one.

When an SD Memory Card is in the
player

Press [SOURCE] to select the SD player mode
and playback starts.

Track Selection

[TRACK2] / [[] : Next track
[TRACK1] / []] : Beginning of the current

track
Previous track (Press
twice.)

Track Search

Press and hold.

[TRACK2] / [[] : Fast forward
[TRACK1] / []] : Fast reverse

1

2

To Stop and Eject the SD Memory Card

Open the front panel and press the center of the back of the card to be unlocked.

SD Player

[SOURCE]

(Source)

[TRACK 1] [TRACK2] (Track)

[P·SET}] [P·SET{] (Play list select)

[]] [[] (Track)

[DISP]

(Data information)

[}] [{]

(Play list select)

Cut Side

Label Side

Play List Number

Play Time

When an SD Memory Card is inside
(Blinks during SD play)

Track Number

Random and Repeat
Indicator

SD Player Mode Display

[DISP]

(Data information)

[SOURCE]

(Source)

Push

19

CQ-SRX7000N

16

E
N
G

L

I
S
H

Play List Selection

¡Refer to the "About SD" (a page 38) and "Notes on SD Memory Card" (a page 50) for the information of the SD

Memory Card.

¡Refer to the Operating Instructions and online help for the PC software “RealJukebox for Panasonic” for the

information of the play list, etc.

Press [P·SET}] or [P·SET{] / [}] or [{] to select the play list
during SD playing.

Playback of the track in the selected play list starts.

Notes :

¡Same play list will be played continuously after all tracks are played in

the selected play list.

¡The play list selection is also available from the menu display

(

a page

20)

.

Select play list number “0” to return to the all track playback.

To Return to All Track Playing

SD Memory Card Data Information

Press and hold [DISP] for more than 2 seconds to display the SD Memory Card data information.

Cautions:

¡

Never load an SD Memory Card into the CD slot. Otherwise the main unit or the SD Memory Card might be damaged.

¡Be sure to close the front panel while SD playback.
¡To avoid damaging the front panel, do not push it down or place objects on it while it is open.
¡Confirm that the direction of the card is correct, and that the card is not inverted. Forced loading may cause trouble.
¡

Do not pinch your finger or hand in the front panel. Do not insert foreign matter into the disc and card slots.

Play List Number

When play list number 2 is selected.

Bit rate Bit rate

While playing music that was compressed in the
AAC compression format

While playing music that was compressed in the
MP3 compression format

AAC
compression
format

MP3
compression
format

20

CQ-SRX7000N

17

E
N
G

L

I
S
H

SD Mode Setting

q Press [MENU] / [SEL] during SD playing.
w Press [P·SET}]

or [P·SET{] / [}] or [{] to select an item.

e Press [BAND] to switch on or off in turn.
e Press [BAND] to set. (Play list and music list)

Repeat Play

Play Settings

Notes:

¡If no keys have been pressed for more than 15 seconds, the display returns to the previous one after changing to the

menu display.

¡Press [DISP] to return to the regular mode.

Select

REP

: Repeat the current selection.
: Cancel

OFF

ON

Random Play

Select

RAND

: All the available tracks are played in a random

sequence.

: Cancel

¡When play list is playing, all the available tracks from the

play list are played in random sequence.

OFF

ON

Play List

Refer to the Operating
Instructions and online
help for the PC software
“RealJukebox for
Panasonic” for the infor­mation of the play list,
etc.

Select

PLAY LIST

From the play list display,

q Select your favorite play list with pressing [P·SET}] or

[P·SET{] / [}] or [{].

w

Press [BAND] to set.

Playback of the track in the
selected play list starts.

¡Select “00-DEFAULT PLAYLIST” to return to the all track

playback.

SD Player

(continued)

Music List

When all track playback

Display all tracks in the
SD Memory Card.

When play list playback

Display all tracks in the
play list.

Select

MUSIC LIST

From the music list display,

q Select your favorite track with pressing [P·SET}] or

[P·SET{] / [}] or [{].

w

Press [BAND] to set.

Playback of the selected
track starts.

SD Menu Display

VOL

MENU

BAND

SET/AUTO

·P

REMOTE

PTY

DISP

SUB

·W

OPEN

SOURCE

TA

PWR

AF

DIM

SPC

M

UTE

TUNE

TRACK

P-SET

DISC

CH

·C

1

2

E

O

N

P

T

Y

C

T

SD/CD RECEIVER WITH FULL DOT MATRIX DISPLAY

D

A

B

C

O

N

TR

O

L

CQ-SRX7000N

P-SET

DISC

M

EN

U

BAND

DISP

TUNE

TRACK

21

CQ-SRX7000N

18

E
N
G

L

I
S
H

Title Display

Title Information

Select

TITLE

: Display
: No display

¡“NO TITLE” is displayed when there is no information.
¡When the title display is set to ON, the mode display appears.

OFF

ON

Title Scroll

Select

TITLE SCROLL

: Continuous scroll
: Scroll stops after a circle scroll

Press and hold

[BAND] for more than 2

seconds to have an another circle scroll.

OFF

ON

Direct play setting from remote control when the menu is not displayed

Press [4] (Random) / [6] (Repeat) on the remote control. Press again to cancel.

[DISP] (Return)

[BAND] (Set)

[MENU]

(Menu)

[P·SET}] [P·SET{] (Select)

[4] (Random)

[6] (Repeat)

[DISP] (Return)

[}] [{]

(Select)

[BAND] (Set)

[SEL] (Menu)

VOL

MENU

BAND

SET/AUTO

·P

REMOTE

PTY

DISP

SUB

·W

OPEN

SOURCE

TA

PWR

AF

DIM

SPC

MUTE

TUNE

TRACK

P-SET

DISC

CH·C

1

2

E

O

N

P

T

Y

C

T

SD/CD RECEIVER WITH FULL DOT MATRIX DISPLAY

D

AB

C

O

N

T

R

O

L

CQ-SRX7000N

P-SET

DISC

M

EN

U

BAND

DISP

SOURCE

TUNE

TRACK

22

CQ-SRX7000N

19

E
N
G

L

I
S
H

CD Changer Mode

Press [SOURCE] to select the CD changer
mode and playback starts

Note : Load a magazine with CDs when “NO

DISC” is displayed.

Disc Selection

[DISC}] / [}] : Next disc.
[DISC{] / [{] : Previous disc.

Track Selection

[TRACK2] / [[] : Next track.
[TRACK1] / []] : Beginning of the cur-

rent track
Previous track (Press
twice.)

Track Search

Press and hold.

[TRACK2] / [[] : Fast forward
[TRACK1] / []] : Fast reverse

1

2

3

CD changer functions are designed for optional Panasonic CD changer unit. When the unit is connected with a CD text rec­ognizable CD changer (CX-DP9061EN, for example), CD text can appear on the display.
Connect the CD changer, and load a magazine.

Notes :

¡Loading a magazine when the power is off allows the power to be turned on. (When ACC Selection is set to ON a

page 36)

¡Ejecting the magazine when the unit is in the CD changer mode allows the mode returns to the previous one.

CD Changer

[BAND]

(Set/Changer select)

[SOURCE] (Source)

[TRACK 1] [TRACK2] (Track)

[MENU]

(Menu)

[P·SET/DISC}] [P·SET/DISC{] (Disc/Select)

[4] (Random)

[6] (Repeat)

[SEL] (Menu)

[]] [[]

(Track)

[DISP]

(Return)

[5] (Scan)

[}] [{]

(Disc/Select)

[BAND]

(Set/Changer select)

CD Changer Mode Display

[SOURCE] (Source)

[DISP] (Return)

Disc Number

Play Time

When a CD changer is
connected
(Blink during CD

changer play)

Scan, Random and
Repeat Indicator

Track Number

CD Changer Selection

Preparation: Connect another CD changer by using an optional dual CD changer selector (CA-CD55EN).

Press [BAND] to select CD changer 1 or CD changer 2.

When CD changer 2 is selected.

Note: This selection is not possible when there is no magazine
in the CD changer.

Note: Only one CD changer is available when connecting the DAB tuner even if the optional dual CD changer selector (CA­CD55EN) is used.

23

CQ-SRX7000N

20

E
N
G

L

I
S
H

CD Changer Mode Setting

q Press [MENU] / [SEL] during CD changer playing.
w Press [P·SET}]

or [P·SET{] / [}] or [{] to select an item.

e Press [BAND] to switch on or off in turn.

Play Settings

Notes:

¡If no keys have been pressed for more than 15 seconds, the display returns to the previous one after changing to the

menu display.

¡Press [DISP] to return to the regular mode.

Random Play

Select

RAND

: All the available tracks on all discs in the magazine

are played in a random sequence.

: Cancel

OFF

ON

Select

D. RAND

: All the available tracks on current discs are played in

a random sequence.

: Cancel

OFF

ON

Scan Play

Select

SCAN

: The first 10 seconds of each track on the discs plays

in sequence.

: Cancel

OFF

ON

Select

D. SCAN

: 10 seconds from the first track of each disc in the

magazine is played.

: Cancel

OFF

ON

Repeat Play

Select

REP

: Repeat the current selection.
: Cancel

OFF

ON

Select

D. REP

: Repeat the current disc selection.
: Cancel

OFF

ON

CD Changer Menu Display

Direct play setting from remote control when the menu is not displayed

Press [4] (Random) / [5] (Scan) / [6] (Repeat) on the remote control. Press again to cancel.
Press and hold

[4] (Disc Random) / [5] (Disc Scan) / [6] (Disc Repeat) for more than 2 seconds on the remote control.

Press and hold again for more than 2 seconds to cancel.

Title Display

Title Information

Select

TITLE

: Display
: No display

¡“NO TITLE” is displayed when there is no information.
¡When the title display is set to ON, the mode display appears.

OFF

ON

Title Scroll

Select

TITLE SCROLL

: Continuous scroll
: Scroll stops after a circle scroll

Press and hold

[BAND] for more than 2 seconds to

have an another circle scroll.

OFF

ON

Note: Optional text recognizable CD changer is necessary.

VOL

MENU

BAND

SET/AUTO

·P

REMOTE

PTY

DISP

SUB

·W

OPEN

SOURCE

TA

PWR

AF

DIM

SPC

M

UTE

TUNE

TRACK

P-SET

DISC

CH

·C

1

2

E

O

N

P

T

Y

C

T

SD/CD RECEIVER WITH FULL DOT MATRIX DISPLAY

D

A

B

C

O

N

T

R

O

L

CQ-SRX7000N

P-SET

DISC

M

E

N

U

BAND

DISP

TUNE

TRACK

24

CQ-SRX7000N

21

E
N
G

L

I
S
H

Tone Quality

(Human Equalizer/HEQ)

There are 49 ready patterns to make presetting
easier.

Default : FLAT(0)
Setting range : 1 - 3 for each patterns

(49 patterns)

Save Your Tone Quality
Preference

(Graphic Equalizer/GEQ)

You can adjust the level from bass to treble
in each of 7 frequency bands. Up to 5 tone
quality preferences can be saved in memory.
( Preset memory 1 to 5 )

Default : 0 dB for each frequency
Setting range : –12 to +12 in 2 dB step

A tone quality that excludes blurred
bass and is comfortable to listen to is
already saved under preset number 6.

Note: You can not save under preset

number 6.

Press

[MENU] / [SEL] to

select AUDIO

FUNCTION

PICTURE

AUDIO

Current Source

Press [P·SET}] or

[P·SET{] / [}] or
[{] to select

Press

[BAND] to set.

HEQ

Press [P·SET}] or

[P·SET{] / [}] or
[{] to select

Press

[BAND] to set.

GEQ

Various Settings

[BAND] (Set)

[TUNE]] [TUNE[] (Select)

[MENU]

(Menu)

[P·SET}] [P·SET{] (Select/Adjust)

AUDIO Menu Display

[DISP]

(Return)

q

w

e

qw

25

CQ-SRX7000N

22

E
N
G

L

I
S
H

Notes:

¡If no keys have been pressed for more than 15

seconds, the display returns to the previous one
after changing to the menu display.

¡Press [DISP] to return to the regular mode.

[P·SET}] / [}]

: Heavy bass

[P·SET{] / [{] : Light bass

[TUNE[] / [[] : Sharp treble

[TUNE]] / []] : Soft treble

Press

[BAND] to set.

• Recreation

• Enjoyable drive

• Calm down

• Concentration

• Safe drive

• Stress relieving

• Refresh

• Listen to the music

• Rhythmical

• Awakening

Heavy

Light

Sharp

Soft

Adjust the level for each frequency.

q

Press [TUNE[] or [TUNE]] / [[] or []] to
move the cursor.

w [P·SET}] / [}] : Upper level.

[P·SET{] / [{] : Lower level

GEQ Adjustment

q Position the cursor on “P•SET” using [TUNE[]

or [TUNE]] / [[] or []].

w Press [P·SET}] or [P·SET{] / [}] or [{]

to select preset number 1 to 5.

e Adjust the level for each frequency.

Note: New setting is overwritten on existing saved set­ting after following this procedure.

Memorize

After changing to the GEQ adjusting display,

q Position the cursor on “P•SET” using [TUNE[]

or [TUNE]] / [[] or []].

w Press [P·SET}] or [P·SET{] / [}] or [{]

to select one of the preset numbers 1 - 6

Note: Memorizing and callback can not be performed
by using [1] to [6] on the remote control.

Calling Back the Preset Tone Quality

[]] [[]

(Select)

[}] [{]

(Select/Adjust)

GEQ Adjusting Display

[BAND]

(Set)

[SEL] (Menu)

<Audio Setting - AUDIO Menu>

[DISP] (Return)

e

VOL

MENU

BAND

SET/AUTO

·P

REMOTE

PTY

DISP

SUB

·W

OPEN

SOURCE

TA

PWR

AF

DIM

SPC

MUTE

TUNE

TRACK

P-SET

DISC

CH·C

1

2

E

O

N

P

T

Y

C

T

SD/CD RECEIVER WITH FULL DOT MATRIX DISPLAY

D

A

B

C

O

N

TR

O

L

CQ-SRX7000N

P-SET

DISC

M

E

NU

BAND

DISP

TUNE

TRACK

26

CQ-SRX7000N

23

E
N
G

L

I
S
H

Balance and Fader

You can adjust the sound balance among the
front, rear, right and left speakers.
Default : L/R(Balance) : Center

FRONT/REAR(Fader) : Center

Setting range : 15 levels each

Sound Image

(Position)

You can adjust the sound image in accordance
with a listener's position.

Default : OFF

Rear Speakers as Sub-Woofers

(Super Base Control Sub-Woofer/SBC-SW)

You can utilize the rear speakers connected to
the built-in amplifier as Sub-Woofers that out­puts only bass.

Default : OFF

Bass Enhancement

(Super Dynamic Bass Boost/SDBB)

The bass of the 4 speakers connected to the
built-in amplifier is enhanced, so that you can
enjoy heavy bass sound.

Default : OFF

Press [P·SET}] or

[P·SET{] / [}] or [{]

to select

Press

[BAND] to set.

BAL/FAD

Press [P·SET}] or

[P·SET{] / [}] or [{]

to select

Press

[BAND] to set.

POSI

Press [P·SET}] or

[P·SET{] / [}] or [{]

to select

Press

[BAND] to set.

SBC SW

Press [P·SET}] or

[P·SET{] / [}] or [{]

to select

Press

[BAND] to set.

SDBB

Various Settings

(continued)

[BAND] (Set)

[TUNE]] [TUNE[] (Select/Adjust)

[MENU]

(Menu)

[P·SET}] [P·SET{] (Select/Adjust)

AUDIO Menu Display

[DISP]

(Return)

Press

[MENU] / [SEL] to

select AUDIO

FUNCTION

PICTURE

AUDIO

Current Source

q

w

e

qw

27

CQ-SRX7000N

24

E
N
G

L

I
S
H

Notes:

¡If no keys have been pressed for more than 15

seconds, the display returns to the previous one
after changing to the menu display.

¡Press [DISP] to return to the regular mode.

[P·SET}] / [}]

: Front enhanced

[P·SET{] / [{] : Rear enhanced

FRONT/REAR (Fader)

SBC-SW ON

[TUNE[] / [[] : Right enhanced

[TUNE]] / []] : Left enhanced

L/R (Balance)

Press [BAND] to set.

Press

[P·SET}] or [P·SET{] / [}] or [{] to change.

Press

[BAND] to set.

: Front right
: Front left
: Front
: Rear

: All seats

OFF

REAR

FRONT

LEFT

RIGHT

Press [P·SET}] or [P·SET{] / [}] or [{] to change.

Press

[BAND] to set.

: Regular Output (Stereo)
: Bass Enhancement (Monaural)

ON/MONO

OFF/STEREO

¡Adjust the Sub-Woofer output level (a page 32). It is also interlocked with the preout (rear speaker output).
¡BAL/FAD, POSI, SDBB and SPACE (a page 30) settings for rear speaker output will be invalid.

Press [P·SET}] or [P·SET{] / [}] or [{] to change.

Press

[BAND] to set.

: Variable, low
: Variable, high
: Fixed, low
: Fixed, high

: Normal output

OFF

TYPE 4

TYPE 3

TYPE 2

TYPE 1

¡Variable : Bass enhancement

along with the volume

¡Fixed : Bass enhancement

within fixed range

dB

12

8

0

300Hz

OFF

Frequency

TYPE1(Variable: low)

TYPE2(Variable: high)

TYPE3(Fixed: low)

TYPE4(Fixed: high)

Boost pressure

[]] [[]

(Select/Adjust)

[}] [{]

(Select/Adjust)

[BAND] (Set)

[SEL] (Menu)

<Audio Setting - AUDIO Menu>

[DISP] (Return)

e

28

CQ-SRX7000N

25

E
N
G

L

I
S
H

VOL

MENU

BAND

SET/AUTO

·P

REMOTE

PTY

DISP

SUB

·W

OPEN

SOURCE

TA

PWR

AF

DIM

SPC

MUTE

TUNE

TRACK

P-SET

DISC

CH·C

1

2

E

O

N

P

T

Y

C

T

SD/CD RECEIVER WITH FULL DOT MATRIX DISPLAY

D

A

B

C

O

N

TR

O

L

CQ-SRX7000N

P-SET

DISC

M

E

NU

BAND

DISP

TUNE

TRACK

Center Speaker Volume
Level

Default : 0
Setting range : –

∞, –10 to +10 in 2dB step

Center Speaker Delay
Time

Default : 0
Setting range : –10 to +10

(1 step = 0.001 seconds)

Press [P·SET}] or

[P·SET{] / [}] or [{]

to select

Press

[BAND] to set.

CENTER

Center Speaker Volume Adjustment Procedure

Preparations :

Set the following before adjusting the volume of the center speaker.

¡Sound space : SPACE OFF (a page 30)
¡Sound space range (WIDE / NARROW) : 0 (a page 30)

1. Adjust the center speaker volume.

Adjust the volume so that middle tone
such as vocal is oriented toward the front
center.

2. Adjust the sound space and its range
(DSP effect).

Various Settings

(continued)

[BAND] (Set)

[TUNE]] [TUNE[] (Select/Adjust)

[MENU]

(Menu)

[P·SET}] [P·SET{] (Select)

AUDIO Menu Display

Preparations :

¡

Connect an optional center speaker and power amplifier. (a page 46)

¡Turn off the DSP effect before adjusting the volume level and delay time of the center speaker. (Refer to the following.)

[DISP]

(Return)

Press

[MENU] / [SEL] to

select AUDIO

FUNCTION

PICTURE

AUDIO

Current Source

q

w

e

q

w

29

CQ-SRX7000N

26

E
N
G

L

I
S
H

Press [P·SET}] or

[P·SET{] / [}] or [{]

to select

LEVEL

[TUNE[] / [[] : Up

[TUNE]] / []] : Down

–

∞ : No sound from the center speaker

Press

[BAND] to set.

Press [P·SET}] or

[P·SET{] / [}] or [{]

to select

DELAY

[TUNE[] / [[] : Longer delay time, farther sound image (Center speaker output

timing is delayed)

[TUNE]] / []] : Shorter delay time, closer sound image (Center speaker output

timing is advanced)

0 : The output timing of the center speaker is synchronized with that of the other

speakers.

Press

[BAND] to set.

Notes:

¡If no keys have been pressed for more than 15

seconds, the display returns to the previous one
after changing to the menu display.

¡Press [DISP] to return to the regular mode.

3. Adjust the center speaker volume again.

Adjust the center speaker delay time and vol­ume to suit with the sound space setting.

[]] [[]

(Select/Adjust)

[}] [{]

(Select)

[BAND] (Set)

[SEL] (Menu)

<Audio Setting - AUDIO Menu>

[DISP] (Return)

e

30

CQ-SRX7000N

27

E
N
G

L

I
S
H

VOL

MENU

BAND

SET/AUTO

·P

REMOTE

PTY

DISP

SUB

·W

O

P

E

N

SO

URC

E

TA

P

W

R

AF

DIM

SPC

MUTE

TUNE

TRACK

P-SET

DISC

CH·C

1

2

E

O

N

P

T

Y

C

T

S

D

/C

D

R

E

C

E

IV

E

R

W

IT

H

F

U

LL

D

O

T M

AT

R

IX D

IS

P

LA

Y

D

A

B

C

O

N

T

R

O

L

CQ-SRX7000N

P-SET

DISC

DISP

SPC

TUNE

TRACK

Sound Space Reproduction

(Space)

Sound space can be made in a car like being in a concert hall.
Sound space range can be adjusted.

Default : Sound space....SPACE OFF

Sound range....0

Setting range : Sound space....8 types (including SPACE OFF)

Sound space range....–3 to +3

Sound space is available for each mode (AM, FM, CD, SD, CD
Changer, DAB and AUX-IN).

Various Settings

(continued)

[TUNE]] [TUNE[] (Adjust)

[SPC] (Sound space)

[P·SET}] [P·SET{] (Select)

[DISP] (Return)

Sound Space Setting Display

Press [SPC] on the main
unit to change to the sound
space setting menu mode.

q

w

q

31

CQ-SRX7000N

28

E
N
G

L

I
S
H

[]] [[]

(Adjust)

[}] [{]

(Select)

[DISP] (Return)

Press [SPC] on the main unit to change the sound space type.
([P·SET}]

and [P·SET{] / [}] and [{] are also available to change the sound space type.)

Sound Space Type Setting

[TUNE[] / [[] : Wide space atmosphere

[TUNE]] / []] : Narrow space atmosphere

Sound Space Range (WIDE / NARROW)

SPACE OFF

LIVE HOUSE CONCERT HALL JAZZ CLUB

CINEMA VOCAL DISCO STADIUM

<Sound Space Setting - SPACE Menu>

Notes:

¡If no keys have been pressed for more than 15

seconds, the display returns to the previous one
after changing to the menu display.

¡Press [DISP] to return to the regular mode.

w

32

CQ-SRX7000N

29

E
N
G

L

I
S
H

VOL

MENU

BAND

SET/AUTO

·P

R

E

M

O

TE

P

TY

D

IS

P

SU

B·W

O

P

E

N

S

O

U

R

C

E

T

A

PW

R

A

F

DIM

S

P

C

M

UTE

TUNE

TRACK

P-SET

DISC

CH·C

1

2

EON

PTY

CT

S

D

/C

D

R

E

C

E

IVE

R

W

ITH

FU

LL D

O

T M

A

TR

IX

D

IS

PLAY

DAB CONTROL

C

Q-SRX7000N

P-SET

DISC

D

IS

P

S

P

C

TUNE

TRACK

Sub-Woofer Volume

(DDBC Volume Level)

Default : 0
Setting range : –

∞, –10 to +10 in 2dB step

Press and hold [SPC] for
more than 2 seconds to
change to DDBC SUB-W
menu mode.

Press

[P·SET}] or

[P·SET{] / [}] or [{]

to select

LEVEL

Sense of Distance

(DDBC Delay Time)

There is no delay time between speaker and
Sub-Woofer sound, so that you can enjoy
dynamic heavy bass.

Default : 0
Setting range : –10 to +10

(1 step = 0.001 seconds)

Press [P·SET}] or

[P·SET{] / [}] or [{]

to select

DELAY

Bass Control

(DDBC Cut off Frequency)

The upper limit of the bass cut off frequency is
controlled, so that you can enjoy a clear
sound.

Default : OFF
Setting range : 4 levels (including OFF)

Press [P·SET}] or

[P·SET{] / [}] or [{]

to select

LPF

These adjustments are effective when Sub-Woofers are connected or when the rear speakers are used as Sub-Woofers.
(

a page 26)

Various Settings

(continued)

[SPC] (DDBC SUB-W menu)

[TUNE]] [TUNE[] (Select/Adjust)

[P·SET}] [P·SET{] (Select)

DDBC SUB-W Menu Display

[DISP]

(Return)

q

w

q

w

e

33

CQ-SRX7000N

30

E
N
G

L

I
S
H

Notes:

¡If no keys have been pressed for more than 15

seconds, the display returns to the previous one
after changing to the menu display.

¡Press [DISP] to return to the regular mode.

[TUNE[] / [[]

: Up

[TUNE]] / []] : Down

–

∞ : No Sub-Woofer sound

[TUNE[] / [[] : Sub-Woofer output timing is delayed than other speakers.

[TUNE]] / []] : Sub-Woofer output timing is advanced than other speakers.

0 : The output timing of the Sub-Woofers is synchronized with that of the other speakers.

Press [TUNE[] or [TUNE]] / [[] or []] to change the cut off frequency.

: Regular output, high tone included

: High tone excluded

(Select the top limit of output lower frequency range.)

200Hz150Hz100Hz

OFF

Follow the setting below when using an adjusting function built in an external amplifier.

¡DDBC Delay Time : 0
¡DDBC Cut off Frequency : OFF

[]] [[]

(Select/Adjust)

[}] [{]

(Select)

<Sub-Woofer Output Setting - DDBC SUB-W Menu>

DDBC / Digital Dynamic Bass Control

[DISP]

(Return)

e

34

CQ-SRX7000N

31

E
N
G

L

I
S
H

VOL

MENU

BAND

SET/AUTO

·P

REMOTE

PTY

DISP

SUB

·W

OPEN

SOURCE

TA

PWR

AF

DIM

SPC

MUTE

TUNE

TRACK

P-SET

DISC

CH·C

1

2

E

O

N

P

T

Y

C

T

SD/CD RECEIVER WITH FULL DOT MATRIX DISPLAY

D

A

B

C

O

N

TR

O

L

CQ-SRX7000N

P-SET

DISC

MENU

BAND

D

IS

P

TUNE

TRACK

Spectrum Analyzer
Display Pattern

Default : Pattern A
Variety : 6 types

Contrast

Allows you to adjust the display contrasts for
better viewing.

Default : Level 3
Setting range : Level 1 to Level 5

Clock Display

Default : ON (Not adjusted. “--:--” will appear.)

Clock Adjustment

When receiving an RDS station, the clock time
(CT) service automatically adjusts the time.
(

a page 10) If CT service is not available,

adjust the clock.

Default : Not adjusted. “0:00”

Press [P·SET}] or

[P·SET{] / [}] or [{]

to select

Press

[BAND] to set.

S·A PATTERN

Press [P·SET}] or

[P·SET{] / [}] or [{]

to select

Press

[BAND] to set.

CONTRAST

Press [P·SET}] or

[P·SET{] / [}] or [{]

to select

CLOCK

Press [P·SET}] or

[P·SET{] / [}] or [{]

to select

Press

[BAND] to set.

CLOCK ADJ

Various Settings

(continued)

[BAND] (Set)

[TUNE]] [TUNE[] (Select/Adjust)

[MENU]

(Menu)

[P·SET}] [P·SET{] (Select/Adjust)

PICTURE Menu Display

[DISP]

(Return)

Press

[MENU] / [SEL] to

select PICTURE

FUNCTION

PICTURE

AUDIO

Current Source

q

w

e

qw

35

CQ-SRX7000N

32

E
N
G

L

I
S
H

Notes:

¡If no keys have been pressed for more than 15

seconds, the display returns to the previous one
after changing to the menu display.

¡Press [DISP] to return to the regular mode.

Press [BAND] to set.

[TUNE[] / [[] : Level up

[TUNE]] / []] : Level down

Press

[BAND] to set.

Increase the
contrast.

Decrease the
contrast.

Press

[BAND] to switch on or off in turn.

: Clock display ON

: Clock display OFF

OFF

ON

[TUNE[] or [TUNE]] / [[] or []] to change.

Press

[BAND] to set.

: Display showing a cube that continues to

change

: Display showing a globe that continues to

change

: Display showing a flower or doll pattern

: Display showing a bird flapping its wings

: Display showing the image of a circuit

: Standard spectrum analyzer display (15 band)

STD

E

D

C

B

A

Note: Switch the screen display to have the Spectrum

Analyzer Display. (

a page 7)

[]] [[]

(Select/Adjust)

[}] [{]

(Select/Adjust)

[BAND] (Set)

[SEL] (Menu)

Clock Display

<Display Setting - PICTURE Menu>

[DISP] (Return)

e

[P·SET}] / [}] : Put forward hour/minute.
[P·SET{] / [{] : Put back hour/minute.

Hour / Minute Switch

[TUNE]] / []] : The hour display
[TUNE[] / [[] : The minute display

Hour / Minute Adjustment

Example: Pattern B

36

CQ-SRX7000N

33

E
N
G

L

I
S
H

VOL

MENU

BAND

SET/AUTO

·P

REMOTE

PTY

DISP

SUB

·W

OPEN

SOURCE

TA

PWR

AF

DIM

SPC

MUTE

TUNE

TRACK

P-SET

DISC

CH·C

1

2

E

O

N

P

T

Y

C

T

SD/CD RECEIVER WITH FULL DOT MATRIX DISPLAY

D

A

B

C

O

N

TR

O

L

CQ-SRX7000N

P-SET

DISC

MENU

D

IS

P

TUNE

TRACK

BAND

Button Operation Sound

(Signal/beep sound)

Default : ON

Press [P·SET}] or

[P·SET{] / [}] or [{]

to select

BEEP

Mute/Attenuation

Decreasing range by pressing [MUTE] button
can be selected.

Default : Mute

Press [P·SET}] or

[P·SET{] / [}] or [{]

to select

MUTE KEY

External Mute

Allows you to mute the current source while
your navigation system provides voice guidance
or car telephone conversation is in progress.
(

a page 45 about External Mute Lead connection)

Default : Lv 0

Press [P·SET}] or

[P·SET{] / [}] or [{]

to select

EXT. MUTE

Excluding AUX-IN from
Source Selection

Default : ON

Press [P·SET}] or

[P·SET{] / [}] or [{]

to select

AUX-IN

Security Function

Allows you to activate the anti-theft function
when leaving your car.

Default : ON

Press [P·SET}] or

[P·SET{] / [}] or [{]

to select

S·LED

Various Settings

(continued)

[BAND] (Set)

[MENU]

(Menu)

[P·SET}] [P·SET{] (Select)

FUNCTION Menu Display

[DISP]

(Return)

Press

[MENU] / [SEL] to

select FUNCTION

FUNCTION

PICTURE

AUDIO

Current Source

Press [P·SET}] or

[P·SET{] / [}] or [{]

to select

ACC

ACC Selection

Default : OFF

q

w

e

qw

37

CQ-SRX7000N

34

E
N
G

L

I
S
H

Notes:

¡If no keys have been pressed for more than 15

seconds, the display returns to the previous one
after changing to the menu display.

¡Press [DISP] to return to the regular mode.

Press [BAND] to switch the beep on or off in turn.

: Operation sound is heard when pressing buttons.

: No sound

OFF

ON

Press [BAND] to switch between mute or attenuation in turn.

: No sound

: Decrease to 1/10

ATT

MUTE

Press [BAND] to change the volume level of the sound source as shown.

Press [BAND] to activate the function or inactivate it in turn.

: External input (AUX-IN) is selectable as a source.

: External input (AUX-IN) is not selectable as a source.

With AUX-IN set to OFF, AUX-IN will not be selected when

[SOURCE] is pressed.(a page 6)

OFF

ON

Press [BAND] to activate the function or inactivate
it in turn.

: Security function is active.

: Security function is inactive.

OFF

ON

Note: The setting state of the External Mute is displayed when the

voice guidance or car telephone is used (except when the setting
state is OFF).

: No sound
: Decrease to 1/30
: Decrease to 1/10
: Unchanged

OFF

Lv 2

Lv 1

Lv 0

When the power of this unit is turned OFF (at ACC OFF setting).
When the key in the ignition is turned OFF (at ACC ON setting).

¡Security message will be displayed.
¡The panel removal and SD Memory Card removal alarm will

be active. (a page 43)

When the front panel is removed.
¡The security indicator blinks. (a page 43)

Security Function

<Function Setting - FUNCTION Menu>

[DISP] (Return)

[}] [{]

(Select)

Press [BAND] to switch the ACC on or off in turn.

: ACC provided

: ACC not provided

OFF

ON

[BAND] (Set)

[SEL] (Menu)

e

Caution: Be sure to select OFF when your car has no
ACC position in the ignition switch. Failure to do this
could cause the battery to go dead.

38

CQ-SRX7000N

35

E
N
G

L

I
S
H

About SD

The SD player in this unit is only for playing.

The player supports only SD Memory Cards on which SD audio-formatted-sound­data is written in AAC or MP3 method. (You can neither format the card nor
record / delete data on the card.)

Because Panasonic SD Audio Player (SV-SD75) are equipped with a SD Memory Card
and other items that are required to write music data on the card except a personal
computer (DOS/V), you can use those.

(Accessories supplied to SV-SD75)

¡SD Memory Card, 64 MB
¡Software* “RealJukebox for Panasonic” (in the CD-ROM,

Panasonic Media Manager V2)

¡USB reader/writer device

Refer to the operating instructions for Panasonic SD Audio Player and accessories
described above and the online help, in addition.

* This is a software that can copy data from a music CD or MP3 to an SD Memory Card via the hard disc.

This software allows you to change or input a list name, a title, artist and so on.

Notes:

¡Use the only SD Memory Cards that are supplied with Panasonic SD Audio Player or are specified in the operating

instructions for Panasonic SD Audio Player. Other SD Memory Cards that are not recommended may not be used.

¡Use the software, what is called “RealJukebox for Panasonic”, supplied with Panasonic SD Audio Player for writing

music data on a card.

¡SD memory cards that save pictures and other such materials in them can not be reproduced.

This unit may not read music data that are written by the use of a software other than "RealJukebox for Panasonic".

Written Data

¡Music data that are not supported by SD Audio Standard V1.0 may not be readable.
¡We do not compensate users for damaged or deleted data due to the defects of this unit or a personal computer, the

electrostatic influence or the electrical noise influence on a SD Memory Card, and etc. Panasonic assumes no responsi­bility for problems resulting from the damaged or deleted data.

39

CQ-SRX7000N

36

E
N
G

L

I
S
H

Record

A B

C D E

B

D C

A E

B E

B E

Check Out

Play List

Play List

Play List

Default

Play List

Default

Play List

All music data recorded

in a personal computer

All music data are checked

out in an SD memory card

❏ Terms for SD

AAC

is an abbreviation for “Advanced Audio Coding”. This is
one of the audio compression methods and applied in the
picture compression standard, “MPEG-2” or “MPEG-4”.
AAC can reproduce higher tones compared to MP3 by
covering a wide sound range.

MP3

is an abbreviation for “MPEG-1 Audio Layer-3”. This is
one of the audio compression methods and applied in the
picture compression standard, “MPEG-1”.

SD Memory Card

SD is an abbreviation for “Secure Digital”. This is a
recording medium that features a function of protecting
copyright, compact, lightweight, large capacity and high­speed writing. This medium can record pictures, music,
and so on.

SD audio player

is an exclusive player for SD Memory Cards that received
data from CDs or digital contents delivered through the
internet in the future.

Play list

has the following two types.

¡Default play list

is an all-track list i.e. a mass of all music data recorded in
a personal computer or saved in a SD Memory Card (up
to 999 tracks).

¡Play list

is a grouped list. You can make a play list by selecting
your favorite music (up to 99 tracks) or you can make it
from the list saved in an SD Memory Card.

Music list

is a list which shows tracks in the SD Memory Card or in
the play list (when play list is played by this unit).

Be sure to use a SD Memory Card that has less than
64 MB of memory.

The following cards can not be accepted.

¡Memory card except SD (such as multimedia card)
¡Card that has data compressed by other than AAC

or MP3

¡Card that has other than SD audio data
¡Card that has not been formatted (unformatted

card)

¡Card that contains no data (blank card)

40

CQ-SRX7000N

37

E
N
G

L

I
S
H

Installation

Supplied Hardware

Fire Wall of Car

Hex. Nut (Option)

Rear Support Strap (Option)

wMounting Bolt

qMounting Collar

Tapping Screw (Option)

3 mmø

(a) Using the Rear Support Strap (Option)

Rubber Cushion
(Option)

wMounting Bolt

qMounting Collar

Rear Support Bracket
(Provided on the car)

(b) Using the Rubber Cushion (Option)

Caution: Do not disconnect the battery terminals of a

car with trip or navigational computer since all user set­tings stored in memory will be lost. Instead take extra
care with installing the unit to prevent shorts.

Preparation

¡Before installation, check the radio operation with anten-

na and speakers.

¡Disconnect the cable from the negative (–) battery termi-

nal (see caution below).

¡Unit should be installed in a horizontal position with the

front end up at a convenient angle, but not more than
30°.

Dashboard
Installation

Installation Opening

The unit can be installed in
any dashboard having an
opening as shown at right. The dashboard should be 4.5
mm - 6 mm thick in order to be able to support the unit.

Installation Precautions

This product should be installed by a professional installer,
if possible.
In case of difficulty, please consult your nearest authorized
Panasonic Service Center.

1. This system is to be used only in a 12-volt, DC battery
system (car) with negative ground.

2. Follow the electrical connections carefully (

a Page 44).

Failure to do so may result in damage to the unit.

3. Connect the power lead (red) after all other connections
are made.

4. Be sure to connect the battery lead (yellow) to the posi­tive terminal (+) of the battery or fuse block (BAT) termi­nal.

5. Insulate all exposed wires to prevent short circuiting.

6. Secure all loose wires after installing the unit.

7. Please carefully read the operating and installation
instructions of the respective equipment before connect­ing it to this unit.

182 mm

53 mm

30° or less

No. Item Diagram Q’ty

q

w

e

r

t

y

Mounting Collar

Mounting Bolt (5 mm ø)

Power Connector

Removable Face Plate Case

Trim Plate

ISO Antenna Adapter

1

1

1

1

1

1

41

CQ-SRX7000N

38

E
N
G

L

I
S
H

¡We strongly recommend that you wear gloves for installation work to protect yourself from injuries.
¡When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your hands and

fingers.

1

2
3
4

Mounting Tabs
Mounting Bolt w

Secure the rear of the unit.

After fixing Mounting Bolt w and Power
Connector e, fix the rear of the unit to the car
body by either method (a) or (b) shown on the
previous page.

Insert Trim Plate t.

After installation reconnect the nega­tive (–) battery terminal.

Insert Mounting Collar q into the
dashboard, and bend the mounting
tabs out with a screwdriver.

First complete the electrical connections, and
then check them for correctness.(

a Page 44)

Lock Lever (CC)

Power Connector e

Make sure that the lock lever (C)
is flush with the mounting collar
(not projecting outward).

Lock Lever

42

CQ-SRX7000N

39

E
N
G

L

I
S
H

2

1

3

;;;;;;

;;;

;

;

;

;;;;

;;;

;

;

;

;;

;

;

;

;

;;;

1

2

;

;;

;;;

;;;;;;;

;;;;;;;

;

;

;

;;;

;;

;;;;

;;;;;

;;

;;;;;;

;;;;;;

;;;;;;;

;;;;;;;

;;;;;;

;;

;;;;;

;;;;;

;;

;;;;;;

;;;;;

1

2

3

4

To Remove the Unit

Switch off the power of the unit.

Remove the removable face plate.

q Press [OPEN]. The removable face plate will

be opened.

w Push the face plate to either the right or left.
e Pull it out toward you.

Remove the Trim Plate

t with a screwdriver.

Pull out the unit while pushing down the lock
lever with a screwdriver.

Remove the unit pulling with both hands.

Installation

(continued)

DISP

OPEN

SOURCE

TA

PWR

DIM

SPC

Open

Contact

Pull out

Push

t Trim Plate

Screwdriver

Lock Lever

Lock Lever

Screwdriver

Open

43

CQ-SRX7000N

40

E
N
G

L

I
S
H

Cautions:

¡This face plate is not waterproof. Do not expose it to water or excessive moisture.
¡Do not remove the face plate while driving your car.
¡Do not place the face plate on the dashboard or nearby areas where the temperature rises to high levels.
¡Do not touch the contacts on the face plate or on the main unit, since this may result in poor electrical contacts.
¡If dirt or other foreign substances get on the contacts, wipe them off with clean and dry cloth.
¡To avoid damaging the front panel, do not push it down or place objects on it while it is open.

2

1

3

This unit is equipped with a removable face plate. Removing
this face plate makes the radio totally inoperable. The security
indicator will blink.

Place Removable Face Plate into
Case

q Switch off the power of the unit.

w Remove the removable face plate.

(

a Page 42)

e Gently press the bottom of the case and open the cover.

Place the face plate into the case and take it with you
when you leave the car.

Install Removable Face Plate

q Fit the face plate with its right or left hole on one of the

pins provided on the main unit.

w Fit the other hold on the other pin applying slight pres-

sure.

e Move the face plate up and down a few times to make

sure it is secure. Then close the front panel and press
down the right side of the face plate until it clicks into
plate.

Security Indicator

The security indicator blinks when the removable face plate is
removed from the unit.

Activate the security function in the FUNCTION menu display.
(

a Page 36)

Panel and SD Memory Card
Removal Alarm

This alarm sounds to warn you not to forget to remove the
panel and SD Memory Card (when SD Memory Card is in the
player) before leaving your car. This function is activated
when the security indicator is on.

Security Indicator

Anti-Theft System

r Removable Face Plate Case

Contact

44

CQ-SRX7000N

41

E
N
G

L

I
S
H

AUX-IN

CH.C-IN

S·W-OUT

REAR

FRONT

CENTER

(L)(White)

(R)(Red)

(L)(White)

(R)(Red)

(L)(White)

(R)(Red)

(White)

(Red)

AUX Input Cord

Pre-Out Cord

(Center)

Pre-Out Cord

(Front)

Pre-Out Cord

(Rear)

Antenna

CD Changer Input Cord

(L)
(White)

(R)(Red)

DIN Cord

Extension Cord

(DIN/BATT/RCA/GND)

RCA Cord

Sub-Woofer Cord

(Monaural)

(R)(Red)

(L)
(White)

(White)

(Supplied to CX-DP9061EN)

Electrical Connections

Cautions:

¡Check the connectors provided on your car (see

precaution below) before connecting the system.

¡This unit is designed for use in a car having a 12-

volt negative ground battery system.

¡To prevent damage to the unit, be sure to follow the

connection diagram below.

¡Strip about 5 mm of the lead ends for connection

(only non-ISO connector cords).

¡Do not insert the power connector into the unit

until the wiring is completed.

¡Be sure to insulate any exposed wires to prevent

short circuiting with the car chassis. Bundle all
cables, and prevent cable terminals from touching
any metal parts.

Precautions (ISO Connector)

¡The pin arrangement of the power connector

conforms to ISO standard.

¡The pin arrangement of ISO connectors in some

cars may differ from the ISO standard.

¡Please check that the pin arrangement of the

connector in your car conforms to ISO standard.

¡For car types A and B, change the wiring of the

red and yellow leads as shown at right.

¡After connection, insulate the portions marked

(C) with insulating tape.
Note: For cars other than types A and B, please
consult your local car shop.

A7 :

A4 :

C

C

A7

A4

BATTERY 15A

ACC

C

C

BATTERY 15A

ACC

A7 :

A4 :

BATTERY 15A

ACC

C

C

A7 :

A4 :

ISO

A

B

Standard ISO

Car Type A

Car Type B

IGN or ACC switched 12V supply

(Red)

(Yellow) (Yellow)

(Red)

(Red)

(Yellow) (Yellow)

(Red)

(Red)

(Yellow) (Red)

(Yellow)

IGN or ACC switched 12V supply

+12 V Battery (Permanent supply)

+12 V Battery (Permanent supply)

+12 V Battery (Permanent supply)

No connection

Cable Wiring Diagram

Example : Connection with CD changer CX-DP9061EN
(Option)

yISO Antenna

Adapter

(If needed)

45

CQ-SRX7000N

42

E
N
G

L

I
S
H

BATTERY 15A

ACC

BATTERY

A8 (Black)

A4 (Yellow)

A7 (Red)

Speakers

A5 (Dark blue)

(Brown w/white stripe)

e Power Connector

Fuse (15A)

Resistor (1 kΩ)

Fuse (3.15A)

(Yellow)

(Black)

(Orange)

A (Black)

CD Text recognizable
CD Changer

CX-DP9061EN

CD Changer
Control Connector

B4 (Gray w/black stripe)

B2 (Violet w/black stripe)

B6 (White w/black stripe)

B8 (Green w/black stripe)

(Brown w/black stripe)

B5 (White)

B3 (Gray)

B7 (Green)

B1 (Violet)

(Blue w/white stripe)

B (Brown)

A5

(Dark blue)

CQ-SRX7000N

¡This unit can be connected to an optional CD changer

(CX-DP9061/DP9060EN, CX-DP88N, CX-DP801/DP
803EN or CX-DP601EN) and optional extension cord.

¡For details consult your nearest authorized Panasonic

Dealer.

¡For connection to a CD changer, refer to the operating

instructions of the CD changer (CX-DP9061/DP9060
EN, CX-DP88N, CX-DP801/803EN or CX-DP601EN).

Ground Lead

To a clean, bare metallic part of the car chassis

Battery Lead

To the car battery, continuous +12 V DC

C3 : External Remote Control Lead

(Brown w/black stripe)
When using a non-Panasonic external
remote control, refer to the manufacture
for their product before connecting the
external remote control lead to the remote
control. If the remote control is not used,
insulate the lead with a friction tape.

C4 : External Amplifier Control Power
Lead (Blue w/white stripe)

To an external amplifier

C2 : Dual CD Changer Control Lead

(Brown w/white stripe)

A8 : Ground Lead (Black)
To a clean, bare metallic part of the
car chassis

A7 : Power Lead (ACC or IGN)

(Red)
To ACC power, +12V DC
A4 : Battery Lead (Yellow)
To the car battery, continuous +12
V DC
A5 : (Dark blue)

Motor Antenna Relay Control Lead

(To Motor Antenna) (Max. 500mA)
This lead is not intended for use
with a switch actuated power
antenna.

C1 : External Mute Lead (Orange)
¡To the Navi Mute lead of the Panasonic

car navigation system.

¡Connect to the car telephone mute lead.

B8 : Rear Left –
B7 : Rear Left +
B6 : Front Left –
B5 : Front Left +
B4 : Front Right –
B3 : Front Right +
B2 : Rear Right –
B1 : Rear Right +

S·W-OUT

FRONT

REAR

AUX-IN

CH·C-IN

Pre-Out Cord
(Center)

CENTER

RCA Cord

(Option)

DIN Cord

CD Changer
Input Cord

AUX Input Cord

CD Changer
Control Connector

(R)(Red)

(R)(Red)

e Power

Connector

CQ-SRX7000N

(L)

(White)

(R)
(Red)

(Rear) (Front)

(L)

(White)

(R)
(Red)

Pre-Out Cord

Speakers for

System Up

Speakers for

System Up

(L)(White)

(L)(White)

(White)

Fuse (3.15A)

(White)

(Red)

Sub-Woofer Cord

Extension Cord

(DIN/BATT/RCA/GND)

Ground Lead (Black)

Battery Lead (Yellow)

RCA Cord

B (Brown)

RCA Cord

(Option)

RCA Cord

(Option)

Stereo

Power Amplifier

Stereo

Power Amplifier

CD Text recognizable CD Changer

CX-DP9061EN

BATTERY

Speakers

Power

Amplifier

Center

Speaker

Power

Amplifier

Sub-Woofer

RCA Cord

(Option)

(Monaural)

(Supplied to CX-DP9061EN)

46

CQ-SRX7000N

43

E
N
G

L

I
S
H

Electrical Connections (continued)

System Upgrade Example 1: 10 Speakers

Combination: CD changer (CX-DP9061EN) and stereo power amplifier

B8 : Rear Left –
B7 : Rear Left +
B6 : Front Left –
B5 : Front Left +
B4 : Front Right –
B3 : Front Right +
B2 : Rear Right –
B1 : Rear Right +

CH·C-IN

Fuse (3.15A)

Extension Cord

(DIN/BATT/RCA/GND)

Ground Lead (Black)

CD Text recognizable CD Changer

CX-DP9061EN

BATTERY

DIN Cord

CD Changer
Connector

CD Changer 1
Connection
Cord

CD•C-1

(R) (Red)

(L)

(White)

Battery Lead (Yellow)

CD Changer
Connector

Dual CD Changer Control Lead

(Brown w/white stripe)

TWIN
CD•C-CONT

Dual Changer
Output Cord

DIN Cord

Dual CD

Changer Selector

CA-CD55EN

(Supplied to CA-CD55EN)

(Red)

(R)

(L)

(White)

CD Changer Input Cord

CD Changer 2
Connection
Cord

DAB Tuner

CY-DAB2000N

RCA Cord

(Supplied to CA-CD55EN)

CD•C-2

DIN Cord

(R)
(Red)

(L)
(White)

(R)(Red)

(L)
(White)

Ground Lead

CQ-SRX7000N

e Power

Connector

Power
Connector

Antenna

(Supplied to CY-DAB2000N)

(Supplied to
CY-DAB2000N)

(Supplied to CX-DP9061EN)

(Supplied to
CY-DAB2000N)

47

CQ-SRX7000N

44

E
N
G

L

I
S
H

System Upgrade Example 2: Connecting a CD Changer and DAB Tuner

Combination: CD changer (CX-DP9061EN), DAB Tuner (CY-DAB2000N).

¡To connect a changer and DAB Tuner, the optional dual CD changer selector (CA-CD55EN) is necessary.
¡When using the dual CD changer selector, connect the DAB tuner unit (CY-DAB2000N) to CHANGER 2 on the dual CD

changer selector side.

48

CQ-SRX7000N

45

E
N
G

L

I
S
H

Caution:

Please follow the instructions given below. Failure to do so will cause damage to the unit and speakers.

Use fuses of the same specified rating (15 A). Using different substitutes or fuses with higher ratings, or connecting the
unit directly without a fuse, could cause fire or damage to the unit.
If the replacement fuse fails, contact your nearest authorized Panasonic Service Center.

Your product is designed and manufactured to ensure the minimum of maintenance. Use a soft cloth for routine exterior
cleaning. Never use benzine, thinner, or other solvents.

L

R

-

-

-

-

-

-

-

-

-

-

+

+

+

+

+

+

+

+

+

+

-

+

-

+

-

+

-

+

-

+

-

+

-

+

-

+

L

R

L

R

L

R

<Right>

<Wrong>

(White)

(White
w/black stripe)

Chassis

(Gray
w/black stripe)

(Gray)

Chassis

¡Use ungrounded speaker only.
¡The maximum speaker output should be 45 W or more. (If used with

the optional power amplifier, the speaker output should be higher than
the maximum amplifier output.)

¡The speaker impedance should be 4 - 8 Ω.
¡This unit uses the BTCL circuit, so each speaker should be connected

separately using parallel vinyl insulated cords.

¡The speaker cords and the power amplifier unit should be kept away

(about 30 cm apart) from the antenna and antenna extension cord.

¡Never connect the speaker cord to

the body of the car.

¡Do not use a 3-wire type speaker

system having a common earth
lead.

¡Do not connect more than one

speaker to one set of speaker
leads.

Speaker Connections

Fuse

Maintenance

49

CQ-SRX7000N

46

E
N
G

L

I
S
H

Notes on CD

How to hold the CD

¡Do not touch the underside of the disc.
¡Do not make scratches on the disc.
¡Do not bend disc.
¡When not in use, keep CD in the case.

Do not use irregularly shaped CDs.

Do not leave discs in the following places:

¡Direct sunlight
¡Near car heaters
¡Dirty, dusty and damp areas
¡Seats and dashboards

Disc Cleaning

Use a dry, soft cloth to wipe from the center outward.

Caution on New Discs

A new disc may have rough edges on its inner and outer
perimeter. These may cause malfunction.

Remove the rough edges using a pencil, etc.

Maintenance

(continued)

ONLY USE DISCS CARRYING THE LABEL

Label side

<Right>

Rough edge

<Wrong>

Notes on CD-R Disc

Only CD-R discs that apply CD-DA method in recording music can be reproduced.

¡Some recorded CD-R discs by using CD recorder are not playable because of their characteristic, or scratches or dirt on

the discs.

¡You can not play a CD-R disc that has not been finalized.
¡A CD-RW disc is not playable.
¡MP3 file, video CD, CD-ROM and CD-EX disc are not playable.
¡Be sure to observe the instructions of CD-R disc for handling it.
¡Do not apply a disc that has a label printed by a commercially available label printer.

Do not use irregularly shaped CDs.

50

CQ-SRX7000N

47

E
N
G

L

I
S
H

Maintenance

(continued)

Cautions regarding handling

¡Keep the SD Memory Card out of the reach of children to prevent them from swallowing it.
¡Do not disassemble or alter a card.
¡Do not drop, moisten, or shock a card.
¡Do not bend a card.
¡Do not touch the metal part of a card with your hand or metallic material.
¡Do not take off a label. Do not stick a new label or seal on a card.

Do not use cracked or wrapped cards.

Cautions regarding custody

¡Be sure to keep a card in a case when the card is not used.
¡Do not leave a card in places where the temperature increases such as inside a car, a place in direct sunlight, near the

heat vent or near the heating appliance.

¡Do not leave a card in places where humidity is high, or a corrosive gas is generated.
¡Do not leave a card in a dusty place.
¡Be sure to remove a SD Memory Card from the unit if the unit is not used for a long time.

Notes on SD Memory Card

Cautions regarding stored data

¡Set the write-protect switch to “LOCK”. Unlock when recording or editing the

card.

¡When writing something in the memo space, use oil-based felt pen. A card

might be damaged or stored data in a card might be destroyed if a pencil or a
ballpoint are used.

Panasonic will not accept responsibility for any data loss or loss directly or indi­rectly caused by data loss.

Rear
View

Write-protect Switch

Memo Space

Use SD Memory Cards on which music data were written by use of the software,
“RealJukebox for Panasonic”, and a personal computer (DOS/V) that supports the software.

51

CQ-SRX7000N

48

E
N
G

L

I
S
H

Preliminary Steps

Check and take steps as described in the tables below.

If You Suspect Something Wrong

Immediately switch power off.
Disconnect the power cable and check that there is neither smoke
nor heat from the unit before asking for repairs. Never try to repair
the unit yourself because it is dangerous to do so.

Cautions:

¡Do not use the unit if it malfunctions or is

something is wrong.

¡Do not use the unit in an irregular condition,

for example, without sound, or with smoke
or foul smell, which can cause ignition or
electric shock. Immediately stop using the
unit and call the store where you purchased
it.

Problem Possible cause / Possible solution

No power

No sound

Buttons unusable
(each source operation)

Only sound, no display

Noise

Menu mode is displayed.

aPress [DISP] to return to the regular mode.

A mobile phone is used near the unit.

aKeep the mobile phone away from the unit.

The display is set to the No Display mode.

aPress [DISP] to change the display.

Condensation (dew).

aWait for a while before use.

External Mute lead is not correctly connected.

aConnect the External Mute lead correctly.

Cables are not correctly connected.

aConnect cables correctly.

Mute is set to ON.

aSet it to OFF.

Fuse is burnt.

a

Call the store where you purchased the unit, or your nearest Panasonic
Service Center

and ask for fuse replacement.

Grounding wire is not correctly connected.

aConnect the grounding wire to a metal part of your car.

Accessory cable is not correctly connected.

aConnect the accessory cable to your car's ACC source.

Battery cable is not correctly connected.

aConnect the battery cable to the terminal that is always live.

Cables are not correctly connected.

aConnect cables correctly.

Car’s engine switch is not on.

aTurn your car’s ignition switch to ACC or ON.

Troubleshooting

■ Common

52

CQ-SRX7000N

49

E
N
G

L

I
S
H

Troubleshooting

(continued)

Problem Possible cause / Possible solution

Battery cable is not correctly connected.

aConnect the battery cable to the terminal that is always live.

The radio antenna is not extended enough.

aExtend the radio antenna enough.

Station is too far, or signals are too weak.

aSelect other stations of higher signal level.

Much noise in FM
stereo and monaural
broadcasts

Preset station is reset

Problem Possible cause / Possible solution

¡CD is defective.
¡Mechanical trouble.

aOpen the panel and press [uCD]. If failure persists, press the reset

switch. If normal operation is not restored, call the store where you pur­chased the unit or the nearest Panasonic Service Center to ask for repairs.

Instable mounting.

aMount the unit securely with the mounting parts, referring to the section

on Installation.

Mounting angle is over 30 degrees.

aAdjust mounting angle to less than 30 degrees.

CD is dirty.

aClean CD, referring to the section on Notes on CD.

The CD-R discs does not apply CD-DA method in recording music.

aUse CD-R discs that apply CD-DA method in recording music.

CD is dirty.

aClean CD, referring to the section on Notes on CD.

CD is upside down.

aPlace CD in the correct direction with the label side up.

CD is in the CD com­partment but no sound
is made, or CD is eject­ed automatically.

CD sound skips, tone
quality is low

Sound skip due to
vibration

Problem Possible cause / Possible solution

Recorded music data is not applied for SD audio standard V1.0.

aSelect other track (or play list).

The SD Memory Card has no sound.

aLoad an SD Memory Card on which sound is recorded.

An SD Memory Card is loaded upside down or in the wrong direction.

aLoad the SD Memory Card in a correctly.

SD Memory Card is
loaded but no sound

CD is not ejected

■ Radio

■ CD

■ SD

"0'00" is displayed and
no sound

53

CQ-SRX7000N

50

E
N
G

L

I
S
H

Problem Possible cause / Possible solution

No sound from left,
right, front, or rear
speaker

Left and right sounds
are reversed in stereo
listening

No sound from center
speaker (Option)

Only bass or monaural
sound from rear speaker

No sound from rear
speaker preout (rear)

No sound from the pre­out <sub-woofer out­put>

DDBC volume is set to – ∞.

aSet DDBC volume to other than – ∞.

SBC-SW is set to ON and DDBC volume to – ∞.

aSet DDBC volume to other than – ∞.

SBC-SW is set to ON.

aSet SBC-SW to OFF.

Center speaker volume is set to – ∞.

aSet center speaker volume to other than – ∞.

The right speaker lead is connected to the left speaker and the left speaker lead
to the right speaker.

aConnect the speaker leads to the correct one.

Cables are not correctly connected.

aConnect the cables correctly.

Left and right balance, or front and rear balance is off on one side.

aAdjust BAL/FAD as appropriate.

Problem Possible cause / Possible solution

Buttons are invalid for
operation

Remote control is in the wrong direction.

aDirect the remote controller at REMOTE (sensor) on the panel.

Battery have run down.

aReplace the battery.

Wrong battery

aCheck the battery.

Battery polarities (+) (–) are reversed.

aInsert the battery correctly.

■ Sound Setting

■ Remote Control

54

CQ-SRX7000N

51

E
N
G

L

I
S
H

Display Possible cause / Possible solution

Disc is dirty, or is upside down.

Disc has scratches.

No operation by some cause.

aOpen the panel and press [uCD].

¡Check disc.
¡Load the disc again.

Return to previous mode

After 5 seconds

After 5 seconds

Display Possible cause / Possible solution

Disc is dirty, or is upside down.

Disc has scratches.

aEject the magazine.

¡Check disc.
¡Load the disc again.

To next disc automatically

No operation by some cause.

aEject the magazine. If failure persists, press the reset switch. If nor-

mal operation is not restored, call the store where you purchased the
unit or the nearest Panasonic Service Center to ask for repairs.

The display continues if the power is not turned off automatically.

Return to previous mode

No disc is in the CD Changer (magazine).

aInsert discs into the changer (magazine).

Note: Displays and the steps to be taken for errors vary in part from changer to changer. For details, refer to the Operating
Instructions for the changer used.

■ Changer

Error Display Messages

■ CD

Troubleshooting

(continued)

55

CQ-SRX7000N

52

E
N
G

L

I
S
H

Display Possible cause / Possible solution

When other than SD Memory Card is loaded.
When there is no data in the card.
When the card is unformatted.

When the data is out of SD audio standard.

When the card is formatted illegally.

When the data is locked for some reason.

Attestation error
The music data or folders in the SD Memory Card have been moved,
changed their name or deleted by using Windows Explorer, etc.

aOpen the panel and eject the SD Memory Card.

¡Check the card and data.
¡Load the card again.

After 5 seconds

When there is no music in a play list.

aSelect another play list and play it.

An error occurs.

aLoad the card again.

■ SD

After 5 seconds

When the data is recorded by other than AAC compression method or MP3
compression method.

aPlay the track (or play list) which is recorded by AAC compression

method or MP3 compression method only.

For some reason, the unit can not read the data.

56

CQ-SRX7000N

53

E
N
G

L

I
S
H

Reset Switch

Product Service

Reset switch

Insert a hard slender stick into the hole and push the switch.

¡The unit returns to the default state when the trouble is reset.

Remember, the data and settings stored in the memory are
deleted.

Important

Push the switch only when the unit fails to operate with any but­tons.
If the panel cannot be opened, or if the unit fails to return to nor­mal condition, call the nearest service station and ask for repairs.

If the suggestions in the charts do not solve the problem, We recommend that you take it to your nearest authorized
Panasonic Service Center. The product should be serviced only by a qualified technician.

Troubleshooting

(continued)

57

CQ-SRX7000N

54

E
N
G

L

I
S
H

Specifications

Power Supply : DC 12 V (11 V - 16 V), Test

Voltage 14.4 V, Negative
Ground

Current Consumption : Less than 2.5 A (CD/SD

mode, 0.5 W 4-Speaker)
Maximum Power Output : 45 W x 4 (at 4 Ω)
Power Output : 22 W x 4 (DIN45 324, at 4 Ω)
Speaker Impedance : 4 - 8 Ω
External Input Impedance : 10 kΩ (AUX IN)
External Input Sensitivity : Max. 2 V (AUX IN)
Pre-Amp Output Voltage : 5 V (CD mode)
Pre-Amp Output Impedance

: 200 Ω
Sub-Woofer Output Voltage : 5 V
Dimensions : 178(W) x 50(H) x 155(D) mm
Weight : 1.5 kg

Number of Channels : 2 Input channels, 6 output

channels
Space Mode : 7 modes
Equalizer Center Frequency : 80, 160, 320, 640, 1.6 k, 4 k,

10 k (Hz)
Variable Range of Equalizer : –12 to +12 dB (13 steps)

DSP

General

Frequency Range : 87.5 - 108 MHz
Usable Sensitivity : 6 dB/µV (S/N 30 dB)
Stereo Separation : 35 dB (at 1 kHz)

Frequency Range : 531 - 1,602 kHz
Usable Sensitivity : 28 dB/µV (S/N 20 dB)

Frequency Range : 153 - 279 kHz
Usable Sensitivity : 32 dB/µV (S/N 20 dB)

Sampling Frequency : 8 times oversampling
DA Converter : MASH•1 bit/4 DAC System
Error Correction System : Panasonic Super Decoding

Algorithm
Pick-Up Type : Astigma 3-beam
Light Source : Semiconductor laser
Wavelength : 780 nm
Frequency Response : 5 Hz - 20 kHz (±1 dB)
Signal to Noise Ratio : 90 dB
Total Harmonic Distortion : 0.01 % (1 kHz)
Wow and Flutter : Below measurable limits
Channel Separation : 70 dB

Compression and

decompression method : AAC/MP3
Channel : Stereo/2 channels
Frequency Response : 20 Hz - 20 kHz (±1 dB)
Signal to Noise Ratio : 90 dB (IHF, A)
Sampling Frequency : 48 k, 44.1 k, 32 k, 24 k,

22.05 k, 16 k (Hz)

Bit Rate : 128, 96, 64, 32, 24, 16 (kbps)

SD Player

CD Player

LW Radio

MW Radio

FM Stereo Radio

Note: Specifications and design are subject to modification without notice due to improvements.

¡

SD logo is a trademark.

¡

Portions of this product are protected under copyright law and are provided under license by ARIS/SOLONA/4C.

¡

RealJukebox is a trademark of RealNetworks, Inc.

¡

Microsoft and its logo as well as Windows and Windows NT are registered trademarks of Microsoft Corporation of the
U.S. in both the United States and other countries.

¡

The ™ and ® markds are not used to identify registered trademarks and trademarks in this operating instructions.

¡

Licensed AAC Patents (U.S. patent numbers);
08/937,950 5,394,473 5,579,430 5,481,614 5,299,238 5,581,654
5848391 5,583,962 08/678,666 5,592,584 5,299,239 05-183,988
5,291,557 5,274,740 98/03037 5,781,888 5,299,240 5,548,574
5,451,954 5,633,981 97/02875 08/039,478 5,197,087 08/506,729
5 400 433 5 297 236 97/02874 08/211,547 5,490,170 08/576,495
5,222,189 4,914,701 98/03036 5,703,999 5,264,846 5,717,821
5,357,594 5,235,671 5,227,788 08/557,046 5,268,685 08/392,756
5 752 225 07/640,550 5,285,498 08/894,844 5,375,189

TM

YEFM283705 B0301-0 Printed in Japan

Matsushita Electric Industrial Co., Ltd.

Central P.O. Box 288, Osaka 542-8588, Japan