COMPONENTS IDENTIFIED BY MARK ON THE
SCHEMATIC DIAGRAM AND IN THE PARTS LIST ARE
CRITICAL FOR RISK OF FIRE AND ELECTRIC SHOCK.
REPLACE THESE COMPONENTS WITH ONKYO
PARTS WHOSE PART NUMBERS APPEAR AS SHOWN
IN THIS MANUAL.
MAKE LEAKAGE-CURRENT OR RESISTANCE
MEASUREMENTS TO DETERMINE THAT EXPOSED
PARTS ARE ACCEPTABLY INSULATED FROM THE
SUPPLY CIRCUIT BEFORE RETURNING THE
APPLIANCE TO THE CUSTOMER.
Continuous Power output (DIN) 75 watts 5 at 6 ohms
Maximum Power output (EIAJ) 100 watts 5 at 6 ohms
Total Harmonic Distortion:0.08% at rated power (Front)
IM Distortion:0.08% at rated power (Front)
Damping Factor:60 at 8 ohms (Front)
Input Sensitivity and Impedance
PHONO:2.5 mV, 50 kohms
*
LINE (CD, TAPE, DVD, VIDEO 1, 2):
MULTICHANNEL INPUT
55 watts per channel min. RMS at 8 ohms,
2 channels driven from 20 Hz to 20 kHz
with no more than 0.08% total harmonic
distortion.
70 watts min. RMS at 6 ohms, 2 channels
driven from 1 kHz with no more than
0.1% total harmonic distortion.
200 mV, 50 kohms
200 mV, 50 kohms
1 Vp-p, 75 ohms (Y)
*
0.28 Vp-p, 75 ohms (C)
1 Vp-p, 75 ohms
0.28 Vp-p, 75 ohms (C)
TX-DS494/HT-R490
Capture Ratio:2.0 dB
Image Rejection Ratio
North American models:40 dB
Other models:85 dB
IF Rejection Ratio:90 dB
Signal-to-Noise Ratio
Mono:76 dB
Stereo:70 dB
Alternate Channel Attenuation:55 dB
Selectivity:50 dB (DIN)
AM Suppression Ratio:50 dB
Total Harmonic Distortion
Mono:0.2%
Stereo:0.3%
Frequency Response:30 Hz-15 kHz, ±1.0 dB
Stereo Separation:45 dB at 1 kHz
AM
Tuning Range
North American models:530-1,710 kHz (10 kHz steps)
European & Australian models:
Worldwide models:531-1,602 kHz (9 kHz steps),
Usable Sensitivity:30 µV
Image Rejection Ratio:40 dB
IF Rejection Ratio:40 dB
Signal-to-Noise Ratio:40 dB
Total Harmonic Distortion:0.7%
GENERAL
Power Supply:AC 120 V, 60 Hz
Power Consumption:3.4 A
Dimensions (W H D):435 150 339 mm
Weight
North American models:9.7 kg, 21.4 lbs.
European & Australian models:
Worldwide models:10.9 kg, 24.0 lbs.
REMOTE CONTROL
Transmitter:Infrared
Signal range:Approx. 5 meters, 16 ft.
Power supply:Two "AA" batteries (1.5 V 2)
Specifications and features are subject to change without notice.
Power supply and voltage vary depending on the area in which the unit is
purchased.
30 dB at 100 Hz-10 kHz
522-1,611 kHz (9 kHz steps)
530-1,710 kHz (10 kHz steps)
AC 230-240 V, 50 Hz
AC 220-230 V and 120 V switchable,
50/60 Hz
260 W
17-1/8" 5-7/8" 13-3/8"
10.3 kg, 22.7 lbs.
[NOTES]
: TX-DS494 only
*
C7003
Q7001
Q7001
R7010
R7017
R7018
R70
19
R7020
R7021
R7022
R7023 R7024
R7025R7026
R7027R7028
R7029
R7030
R7031
R7032
R7034
R7037
R7049
R7051
R7052
R7053
R7054
R7055
R7056
R7057
R7058
R7090
R7107
R7108
R7153
R7151
R7156
R7157
1
SERVICE PROCEDURES
TX-494/HT-R490
1. Replacing the fuses
This symbol located near the fuse indicates that the
fuse used is show operating type, For continued protection against
fire hazard, replace with same type fuse , For fuse rating, refer to
the marking adjest to the symbol.
Ce symbole indique que le fusible utilise est e lent.
Pour une protection permanente, n'utiliser que des fusibles de meme
type. Ce demier est indique la qu le present symbol est apposre.
REF. NO. PART NO.DESCRIPTION
F911
F922
2521666.3A-UL/T-237, Fuse <DD,WT,WR,490>
252077 or4A-SE-EAK or
2522434A-SE-TL250V, Fuse <PP,WT,WR,GT,PA>
F923
[NOTE]
2520752.5A-SE-EAK, Fuse <PP>
<DD> : 120V model only
<DT> : Asian model only for 120V
<GT> : Asian model only for 230V
<PP> : European model only
<WT> : World wide model only
<WR> : Chinese model only
<490> : HT-R490 only
2. To initialize the unit
This device employs a microprocessor to perform various
functions and operations. If interference generated by an external
power supply, radio wave, or other electrical souce results in accident
which causes the specified operations and functions to operate
abnormally.
To perform a result, please follow the procedure below.
5.Setting the AM tuning step frequency
(World wide models only)
Worldwide models are equipped with a switch that controls
the AM band tuning step. Please set this switch to match the
AM band tuning step frequency in your area.
AM FREQUENCY
STEP
10k Hz
9kHz
MONITOR
DVD
VIDEO 2
SUB
ANTENNA
R
OUT
AM
TAPE
IN
FM
75
DVD
VIDEO 1
GND
CD
PHONO
VIDEO 2
L
R
R
VIDEO1
OUT
WOOFER
PRE OUT
L
MONITOR
OUT
IN
IN
OUT
IN
VIDEO
L
DIGITALINPUT
OPTICAL
COAXIAL
FRONT
SURR
R
MULTI
CHANNEL INPUT
SVIDEO
IN
IN IN
L
R
CAUTION:
SPEAKER IMPEDANCE
6 OHMS MIN. PER EACH
RL
FRONTSPEAKERS
SPEAKER TERMINAL
A
AV RECEIVER
MODEL NO.
TX-DS494
AC 120/220-230V
RATING:
50/60Hz 260W
B
2
1
L
L
SUB
CENTER
WOOFER
REMOTE
CONTROL
AM FREQUENCY
R
L
CENTER
SPEAKER
STEP
10kHz
9kHz
VOLTAGE SELECTOR
220-230V
SURROUND
SPEAKERS
AC OUTLETS
SWITCHED
TOTAL 100W MAX.
120V
6.Setting the voltage selector
(Worldwide models only)
World models are equipped with a voltage selector
conform with local power supplies. Be sure to set this switch to
match the voltage of the power supply in your area before
plugging in the unit.
Determine the proper voltage for your area: 230V or 120V.
If the preset voltage is not correct for your area, insert a screwdriver
into the groove in the switch. Slide the switch all the way to the right
(120V) or to the left(220V-230V), whichever is appropriate.
MONITOR
DVD
VIDEO 2
SUB
ANTENNA
R
OUT
AM
TAPE
IN
FM
75
DVD
VIDEO 1
GND
CD
PHONO
VIDEO 2
L
R
R
VIDEO1
OUT
WOOFER
PRE OUT
L
MONITOR
OUT
IN
IN
OUT
IN
VIDEO
L
DIGITALINPUT
OPTICAL
COAXIAL
FRONT
R
SURR
R
MULTI
CHANNEL INPUT
SVIDEO
IN
IN IN
L
R
CAUTION:
SPEAKER IMPEDANCE
6 OHMS MIN. PER EACH
RL
FRONTSPEAKERS
SPEAKER TERMINAL
A
AV RECEIVER
MODEL NO.
TX-DS494
AC 120/220-230V
RATING:
50/60Hz 260W
B
2
1
L
L
SUB
CENTER
WOOFER
REMOTE
CONTROL
AM FREQUENCY
R
L
CENTER
SPEAKER
STEP
10kHz
SURROUND
SPEAKERS
AC OUTLETS
SWITCHED
VOLTAGE SELECTOR
220-230V
TOTAL 100W MAX.
120V
9kHz
1. Press and the hold down the VIDEO 1 button , then press the
SPEAKER A button when the nuit is Power ON.
2. After " CLEAR " is displayed, the preset memory and each mode
stored in the memory, are initialized and will return to the
factory settings.
3. Safety-check out
(Only U.S.A. model)
After correcting the original service problem perform the
following safety check before releasing the set to the customer
Connect the insulating-resistance tester between the plug of
power supply cord and terminal GND on the back panel.
Specifications: More than 10Mohm at 500V
4. Memory Preservation
This unit does not require memory preservation batteries. A built-in
memory power back-up system preserves the contents of the
memory during power failures and even when the unit is un-plugged.
The unit must be plugged in order to charge the back-up
system.
The memory preservation period after the unit has been unplugged
varies depending on climate and placement of the unit. On the
average, memory contents are protected over a period of a few
weeks after the last time the unit has been unplugged. This pe-riod
is shorter when the unit is exposed to a highly humid cli-mate.
VOLTAGE SELECTOR
220-230V
120V
7. Changing the AM band step
With the exception of the worldwide models, a tuning step selector
switch is not provided. When you change the band step, change
the parts as shown below.
To 10kHz To 9kHz
R7020 Open 10k
R7021 10kohm 8.2kohm
NOTE: THE COMPONENTS IDENTIFIED BY MARK
ARE CRITICAL FOR RISK OF FIRE AND
ELECTRIC SHOCK. REPLACE ONLY WITH
PART NUMBER SPECIFIED.
EXPLODED VIEW PARTS LIST-2
TX-DS494/HT-R490
REF. NO.PART NO.DESCRIPTION
P901253279HITAS-UC-2#18 or
Q523, Q524 ,
Q1512
Q623, Q624
Q525, Q526 ,
Q1513
Q625, Q626
Q517, Q518 2212654 or2SC3421-Y or
Q921 22278012578M12HF, IC
Q922 22279012579M12HF, IC
Q933 22278005578M05HF, IC
T901 2301438NPT-1384D, Power transformer
CAUTON : Replacement of the transistor of mark * ,if necessary,
must be made from the same beta group(HFE) as the
original type.
[NOTE]
<DD> : 120V model only
<DT> : Asian model only for 120V
<GT> : Asian model only for 230V
<PP> : European model only
<WT> : World wide model only
<WR> : Chinese model only
<494> : TX-DS494 only
<490> : HT-R490 only
253280VOLAS-UC-2#18 <DD>
253306VOL orAS CEE-2 or
253193HITAS-CEE <PP, GT>
253197HIT orAS-SAA or
253307VOLAS-SAA <PA>
253233KAW orAS-CEE-2 or
253306VOLAS-CEE-2 <WT>
253267KAW,AS-CCEE,
253285HIT orAS-CCEE or
253286VOLAS-CCEE <WR>
2202253 or2SC4467-O or
2202254 or2SC4467-Y or
2202256 or2SC4467-P or
2203042 or2SC5197-R or
2203043 or2SC5197-O or
2203502 orKTD718-R or
2203503KTD718-O, Transistor
2202243 or2SA1694-O or
2202244 or2SA1694-Y or
2202246 or2SA1694-P or
2203032 or2SA1940-R or
2203033 or2SA1940-O or
2203492 orKTB688-R or
2203493KTB688-O, Transistor
22126532SC3421-O, Transistor
2301440NPT-1384P, Power transformer
2301441NPT-1384DG, Power transformer
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
<DD, 490>
<PP, PA>
<WT, WR, GT>
<B> : Black model only
<S> : Silver model only
<G> : Golden model only
REF. NO.PART NO.DESCRIPTION
U11A865589-2ANAAF-6789-2A, Front channel power amplifier PC board ass'y <DD>
1A865589-2BNAAF-6789-2B, Front channel power amplifier PC board ass'y <PP,PA, GT>
1A865589-2CNAAF-6789-2C, Front channel power amplifier PC board ass'y <490>
1A865589-2DNAAF-6789-2D, Front channel power amplifier PC board ass'y <WT, WR>
U21A865590-2ANAAF-6790-2A, Surround channel power amplifier PC board ass'y <DD>
1A865590-2BNAAF-6790-2B, Surround channel power amplifier PC board ass'y <PP,PA, GT>
1A865590-2CNAAF-6790-2C, Surround channel power amplifier PC board ass'y <490>
1A865590-2DNAAF-6790-2D, Surround channel power amplifier PC board ass'y <WT, WR>
U31A865591-2ANAETC-6791-2A, Front speaker terminal PC board ass'y <DD>
1A865591-2BNAETC-6791-2B, Front speaker terminal PC board ass'y <PP,PA, GT>
1A865591-2CNAETC-6791-2C, Front speaker terminal PC board ass'y <490>
1A865591-2DNAETC-6791-2D, Front speaker terminal PC board ass'y <WT, WR>
U41A865592-2ANAETC-6792-2A, Surround speaker terminal PC board ass'y <DD>
1A865592-2BNAETC-6792-2B, Surround speaker terminal PC board ass'y <PP,PA, GT>
1A865592-2CNAETC-6792-2C, Surround speaker terminal PC board ass'y <490>
1A865592-2DNAETC-6792-2D, Surround speaker terminal PC board ass'y <WT, WR>
U51A865594-2ANAETC-6794-2A, Holder PC board ass'y <DD>
1A865594-2BNAETC-6794-2B, Holder PC board ass'y <PP,PA, GT>
1A865594-2CNAETC-6794-2C, Holder PC board ass'y <490>
1A865594-2DNAETC-6794-2D, Holder PC board ass'y <WT, WR>
U61A865595-2ANAETC-6795-2A, Secondary terminal PC board ass'y <DD>
1A865595-2BNAETC-6795-2B, Secondary terminal PC board ass'y <PP,PA, GT>
1A865595-2CNAETC-6795-2C, Secondary terminal PC board ass'y <490>
1A865595-2DNAETC-6795-2D, Secondary terminal PC board ass'y <WT, WR>
U71A899543-1ANADIS-7043-1A, Display circuit PC board ass'y <DD>
1A899543-1BNADIS-7043-1B, Display circuit PC board ass'y <PP>
1A899543-1CNADIS-7043-1C, Display circuit PC board ass'y <PA,GT>
1A899543-1DNADIS-7043-1D, Display circuit PC board ass'y <WT,WR>
1A899543-1FNADIS-7043-1F, Display circuit PC board ass'y <490>
U81A899544-1ANAAR-7044-1A, Main PC board ass'y <DD>
1A899544-1BNAAR-7044-1B, Main PC board ass'y <PP>
1A899544-1CNAAR-7044-1C, Main PC board ass'y <PA,GT>
1A899544-1DNAAR-7044-1D, Main PC board ass'y <WT,WR>
1A899544-1FNAAR-7044-1F, Main PC board ass'y <490>
U91A899545-1ANAETC-7045-1A, Head phone jack PC board ass'y <DD>
1A899545-1BNAETC-7045-1B, Head phone jack PC board ass'y <PP>
1A899545-1CNAETC-7045-1C, Head phone jack PC board ass'y <PA,GT>
1A899545-1DNAETC-7045-1D, Head phone jack PC board ass'y <WT,WR>
1A899545-1FNAETC-7045-1F, Head phone jack PC board ass'y <490>
U101A899546-1ANAETC-7046-1A, Master volume PC board ass'y <DD>
1A899546-1BNAETC-7046-1B, Master volume PC board ass'y <PP>
1A899546-1CNAETC-7046-1C, Master volume PC board ass'y <PA,GT>
1A899546-1DNAETC-7046-1D, Master volume PC board ass'y <WT,WR>
1A899546-1FNAETC-7046-1F, Master volume PC board ass'y <490>
NOTE: THE COMPONENTS IDENTIFIED BY MARK
ARE CRITICAL FOR RISK OF FIRE AND
ELECTRIC SHOCK. REPLACE ONLY WITH
PART NUMBER SPECIFIED.
EXPLODED VIEW PARTS LIST-3
TX-DS494/HT-R490
REF. NO.PART NO.DESCRIPTION
U111A899547-1ANAETC-7047-1A, Tone control PC board ass'y <DD>
1A899547-1BNAETC-7047-1B, Tone control PC board ass'y <PP>
1A899547-1CNAETC-7047-1C, Tone control PC board ass'y <PA,GT>
1A899547-1DNAETC-7047-1D, Tone control PC board ass'y <WT,WR>
1A899547-1FNAETC-7047-1F, Tone control PC board ass'y <490>
U121A899548-1ANAETC-7048-1A, Holder PC board ass'y <DD>
1A899548-1BNAETC-7048-1B, Holder PC board ass'y <PP>
1A899548-1CNAETC-7048-1C, Holder PC board ass'y <PA,GT>
1A899548-1DNAETC-7048-1D, Holder PC board ass'y <WT,WR>
1A899548-1FNAETC-7048-1F, Holder PC board ass'y <490>
U131A899549-1ANADG-7049-1A, DSP circuit PC board ass'y <DD>
1A899549-1BNADG-7049-1B, DSP circuit PC board ass'y <PP, WR,WT, PA, GT>
1A899549-1CNADG-7049-1C, DSP circuit PC board ass'y <490>
U141A899550-1ANAAF-7050-1A, Input terminal PC board ass'y <DD>
1A899550-1BNAAF-7050-1B, Input terminal PC board ass'y <PP>
1A899550-1CNAAF-7050-1C, Input terminal PC board ass'y <PA>
1A899550-1DNAAF-7050-1D, Input terminal PC board ass'y <WT>
1A899550-1FNAAF-7050-1F, Input terminal PC board ass'y <490>
1A899550-1GNAAF-7050-1G, Input terminal PC board ass'y <GT>
1A899550-1HNAAF-7050-1H, Input terminal PC board ass'y <WR>
U151A899551-1ANAPS-7051-1A, Primary circuit PC board ass'y <DD>
1A899551-1BNAPS-7051-1B, Primary circuit PC board ass'y <PP>
1A899551-1CNAPS-7051-1C, Primary circuit PC board ass'y <PA>
1A899551-1DNAPS-7051-1D, Primary circuit PC board ass'y <WT>
1A899551-1FNAPS-7051-1F, Primary circuit PC board ass'y <490>
1A899551-1GNAPS-7051-1G, Primary circuit PC board ass'y <GT>
1A899551-1HNAPS-7051-1H, Primary circuit PC board ass'y <WR>
U161A899552-1ANASW-7052-1A, Power switch PC board ass'y <DD>
1A899552-1BNASW-7052-1B, Power switch PC board ass'y <PP>
1A899552-1CNASW-7052-1C, Power switch PC board ass'y <PA>
1A899552-1DNASW-7052-1D, Power switch PC board ass'y <WT>
1A899552-1FNASW-7052-1F, Power switch PC board ass'y <490>
1A899552-1GNASW-7052-1G, Power switch PC board ass'y <GT>
1A899552-1HNASW-7052-1H, Power switch PC board ass'y <WR>
U1725137053NCETC-7053 PC board for Holder
U181A899554-1ANAETC-7054-1A, Primary terminal PC board ass'y <DD>
1A899554-1BNAETC-7054-1B, Primary terminal PC board ass'y <PP>
1A899554-1CNAETC-7054-1C, Primary terminal PC board ass'y <PA>
1A899554-1DNAETC-7054-1D, Primary terminal PC board ass'y <WT>
1A899554-1FNAETC-7054-1F, Primary terminal PC board ass'y <490>
1A899554-1GNAETC-7054-1G, Primary terminal PC board ass'y <GT>
1A899554-1HNAETC-7054-1H, Primary terminal PC board ass'y <WR>
U191A899555-1ANAPS-7055-1A, Regulator circuit PC board ass'y <DD>
1A899555-1BNAPS-7055-1B, Regulator circuit PC board ass'y <PP>
1A899555-1CNAPS-7055-1C, Regulator circuit PC board ass'y <PA>
1A899555-1DNAPS-7055-1D, Regulator circuit PC board ass'y <WT>
1A899555-1FNAPS-7055-1F, Regulator circuit PC board ass'y <490>
1A899555-1GNAPS-7055-1G, Regulator circuit PC board ass'y <GT>
1A899555-1HNAPS-7055-1H, Regulator circuit PC board ass'y <WR>
REF. NO.PART NO.
U201A899556-1ANAETC-7056-1A, Video terminal PC board ass'y <DD>
1A899556-1BNAETC-7056-1B, Video terminal PC board ass'y <PP>
1A899556-1CNAETC-7056-1C, Video terminal PC board ass'y <PA>
1A899556-1DNAETC-7056-1D, Video terminal PC board ass'y <WT>
1A899556-1FNAETC-7056-1F, Video terminal PC board ass'y <490>
1A899556-1GNAETC-7056-1G, Video terminal PC board ass'y <GT>
1A899556-1HNAETC-7056-1H, Video terminal PC board ass'y <WR>
U211A899557-1ANAAF-7057-1A, Multi channel input terminal PC board ass'y <DD>
1A899557-1BNAAF-7057-1B, Multi channel input terminal PC board ass'y <PP>
1A899557-1CNAAF-7057-1C, Multi channel input terminal PC board ass'y <PA>
1A899557-1DNAAF-7057-1D, Multi channel input terminal PC board ass'y <WT>
1A899557-1FNAAF-7057-1F, Multi channel input terminal PC board ass'y <490>
1A899557-1GNAAF-7057-1G, Multi channel input terminal PC board ass'y <GT>
1A899557-1HNAAF-7057-1H,,Multi channel input terminal PC board ass'y <WR>