One for all URC-4300 User manual

URC-4300

ONE FOR ALL

Universal Remote

USER GUIDE & CODE BOOK

Retain For Future Reference

■■■■

Table of Contents

About Your ONE FOR ALL 6........................................ 2

Features and Functions.................................................... 4

Installing the Batteries .................................................... 6

Setting Up Your Television............................................. 7

Setting Up Your Video Recorder .................................... 8

Setting Up Your Other Devices...................................... 9

The Search Method ........................................................ 11

Getting Codes from the ONE FOR ALL 6..................... 12

Changing the Device Keys.............................................. 13

Punch-Through (Control Across Device Types)............ 15

Scan................................................................................. 16

Colour & Brightness ....................................................... 18

More on Teletext and Fastext ......................................... 19

Key Sequence .................................................................. 20

Key Magic®..................................................................... 22

Preventing Accidental Code Changes............................ 23

Trouble-Shooting ............................................................ 24

Consumer Help-Line....................................................... 25

Telephone Upgradable Technology ................................ 26

Set-Up Codes .................................................................. 27

Set-Up Codes for Televisions........................................ 28

Set-Up Codes for Video Recorders............................... 30

Set-Up Codes for Satellite Receivers............................ 32

Set-Up Codes for Cable Converters ............................. 34

Set-Up Codes for CD Players and Mini Disk Players... 34

Set-Up Codes for Audio Amplifiers ............................. 35

Set-Up Codes for Audio Amplifier/Tuners................... 35

Set-Up Codes for Record Players.................................. 35

Set-Up Codes for Miscellaneous Audio........................ 36

Set-Up Codes for Audio Cassette Players..................... 36

Set-Up Codes for DAT and DCC................................. 36

Set-Up Codes for Laser Disc Players............................. 36

Set-Up Home Automation ........................................... 36

Note: If you’re having problems operating all the functions of your device, don’t worry, your ONE FOR ALL may just need customising for your model type. Just call our consumer helpline and we’ll get you on the right track.

■ ■ ■ ■

About Your ONE FOR ALL 6

Your ONE FOR ALL 6 Package contains:

Your ONE FOR ALL 6 Universal Remote Control Your ONE FOR ALL 6 User Guide & Code Book

Your User Guide & Code Book is divided into two parts: set-up instructions and device codes. You will need this guide to set up your new ONE FOR ALL 6 so please be sure to keep it.

Your ONE FOR ALL 6 needs four new AAA/LR03 alkaline batteries.

Your ONE FOR ALL 6 is designed to let you use one remote to operate your Video and Audio Equipment; any device designed to be operated by an infrared signal. You can choose any combination of 6 devices you would like to operate with your ONE FOR ALL 6. For example, 2-TVs, 1-VCR, 1-Satellite Receiver, 1-CD Player and 1-Amplifier; the choice is yours.

■ ■ ■ ■

MAGIC Key

■■■■

LED

Power

Device Keys

Teletext Keys Rewind

Play

Stop

Number Keys

-/-- Key

Normalize Mute

Pause Fast Forward

Record Fastext keys

Programme +/Key

Scan Key

Volume +/- Key

■■■■

Features and Functions

Key Function

LED LED

SAT

AUX1

The LED (Light Emitting Diode) flashes red to show the remote is working.

Power

The Power key controls the same function as your original remote.

MAGIC Key

The MAGIC key is used to set up your ONE FOR ALL 6 and to access special functions.

Device Keys

VCR

The TV, VCR, SAT, CD, AUX1 and AUX2 keys select the home

entertainment device to be controlled. For example pressing the TV key allows the remote to control the functions of

AUX2

your Television, after pressing VCR you can operate your Video Cassette Recorder, etc. For more detailed information, please see page 9.

Normalize Key

The Normalize key returns all settings of your television to their standard levels.

Mute

The Mute key operates the same functions it did on your original remote.

Number Keys

The Number keys (0-9, 10, 20) provide functions just like your original remote, such as direct access programme selection. If your original remote uses one/two digit input switching ( symbol), this function can be obtained by pressing the the 10 key.

-/--

-/-- key, which is the same as

■■■■

VOL

■■■■

Volume, Programme

The Volume and Programme keys control the two most frequently used functions of

C/P

your audio and video devices. They operate just as those on your original remote.

SCAN

Scan

The Scan key allows you to easily browse through the programmes on your Television, Video Recorder, Satellite Receiver and Cable Converter. See page 16 for more information.

Video Recorder Keys

After pressing the VCR key, the Video Recorder keys operate the functions of your Video Recorder. To prevent accidental recordings, the Record key must be pressed

Teletext/Fastext Keys

After pressing the TV key, the top row of the Video Recorder keys are used to operate the main teletext functions. The symbols above the keys are for teletext. The Text keys are used to access the teletext functions of your Television. Of course, your Television must be teletext capable. For an explanation of the teletext symbols, please refer to page 19 of this manual.

After pressing the TV key, the bottom row of the Video Recorder keys marked red, green, yellow and blue allow you to access the fastext functions of your television. Again, your television must be fastext capable to operate these functions. For a more detailed explanation on how teletext and fastext work, please refer to the manual of your Television set.

twice to start recording.

■■■■

Installing the Batteries

Your ONE FOR ALL 6 needs four new AAA/LR03 alkaline batteries.

Remove the battery cover from the back of your ONE FOR ALL 6.

Match the batteries to the + and

- marks inside the

battery case, then insert the batteries.

Press the battery cover back into place.

Note: In order to avoid having to reprogramme your ONE FOR ALL 6 after you remove the batteries, you will need to insert new batteries within 3 minutes. Also it is best that you do not use rechargeable batteries.

■■■■

Setting Up Your Television

To set up the ONE FOR ALL 6 for your Television:

ONE FOR ALL

Fernseher

Admiral 087 093 264

163 Agazi 264 AGB 075 Aiko 216 009 Akai 208 351 037

Write your code in the three boxes on page 27, for easy future reference.

To control your Television, press TV first.

Find your Television code in the Set-Up Code section (starting on page 28). Codes are listed by brand name. The most popular code is listed first. Make sure your Television is switched on; any programme is fine.

Press and release the ONE FOR ALL 6’s

press and hold down the MAGIC key

light blinks twice. (The light will blink once and then twice.)

Enter your

code

The red light will blink twice.

Now, aim the ONE FOR ALL 6 at your Television and press Television switches off, your ONE FOR ALL 6 is ready to run your Television.

TV key, then

until the red

three-digit TV

using the number keys.

POWER. If your

If your Television does not respond, follow steps 1 through 4 with each code listed for your brand. If none of the codes listed for your brand operate your Television, then try the search method described on page 11, even if your brand is not listed at all.

■■■■

Setting Up Your Video Recorder

To set up the ONE FOR ALL 6 for your Video Recorder:

ONE FOR ALL

Fernseher

Admiral 087 093 264

163 Agazi 264 AGB 075 Aiko 216 009 Akai 208 351 037

Find your Video Recorder code in the Set-Up Code section (starting on page 28). Codes are listed by brand name. The most popular code is listed first. Switch on your Video Recorder and insert a blank tape.

VCR

PLAY

Write your code in the three boxes on page 27, for easy future reference.

To control your Video Recorder, press the VCR key first.

If your Video Recorder does not respond, follow steps 1 through 4 with each code listed for your brand. If none of the codes listed for your brand operate your Video Recorder, then try the search method described on page 11, even if your brand isn’t listed at all. If you change programmes on your Television through your Video Recorder, press VCR and not TV, before you use the programme keys.

Press and release the ONE FOR ALL 6’s

press and hold down the MAGIC key

FOR ALL 6’s red light blinks twice. (The light will blink once and then twice.)

Enter your code using the number keys. The red light will blink twice.

Now, aim the ONE FOR ALL 6 at your Video Recorder and then press PLAY. If your Video starts playing the tape, your ONE FOR ALL 6 is ready to run your Video Recorder.

VCR key, then

until the ONE

three-digit VCR

■■■■

Setting Up Your Other Devices

To set up the ONE FOR ALL 6 for your other devices:

ONE FOR ALL

Fernseher

Admiral 087 093 264

163 Agazi 264 AGB 075 Aiko 216 009 Akai 208 351 037

Press the device key on the ONE FOR ALL 6 for the device you wish to control. Devices can be found under the following key:

Device

Television

Video Recorder

Satellite Receiver Cable Converter

CD Player Mini Disk Player

Audio Amplifier Audio Amplifier/Tuner Record Player Miscellaneous Audio Home Automation

Audio Cassette Player Digital Audio Tape Laser Disc Player

Find the code for your device in the Set-Up Code section (starting on page

28). Codes are listed by device type and brand name. The most popular code is listed first. Make sure your device is turned on.

Device Key

VCR

SAT

}

AUX1

}

AUX2

}

Press and hold down the MAGIC key

light blinks twice. (The light will blink once and then twice.)

Enter your

device code

ber keys. The red light will blink twice.

three-digit

■■■■

until the red

using the num-

■■■■

Now, aim the ONE FOR

Write the code for your device(s) in the boxes on page 27, for easy future reference.

Remember to press the correct device key before operating your device. Only one device (CD, amplifier, cassette, etc.) can be assigned to a device key. If your original remote operates more than one device (for example, a receiver, CD player and cassette player in one remote), you need to set up each device separately.

If your device does not respond, follow steps 1 through 5 with each code listed for your brand. If none of the codes listed for your brand operate your device, then try the search method described on page 11, even if your brand is not listed at all.

Note: If your device’s original remote control does not have a power key, press PLAY instead of POWER when setting up your device.

ALL 6 at your device and press

POWER. If your device switches off, the ONE FOR ALL 6 is ready to operate your device.

■■■■

The Search Method

If your device does not respond to the ONE FOR ALL 6 after you have tried all the codes listed for your brand, try the Search Method. The Search Method may also work if your brand is not listed at all.

Let’s say you cannot get your ONE FOR ALL 6 to control your Television:

1 2

To search for the code for your other devices, follow steps 1 through 5, only substitute the appropriate device key during steps 2 and 4. For example, to search for the code for your Video, press the VCR key; for your Satellite or Cable Converter, press the SAT key; for your Amplifier, press the AUX1 key, etc. Use the chart on page 9 for a guide.

Note: If your device’s original remote control does not have a power key, press PLAY instead of POWER when searching for your code.

Switch your Television on; any programme is fine.

Press the FOR ALL 6.

Aim the ONE FOR ALL 6 at your Television.

down MAGIC

FOR ALL 6’s red light blinks twice. Then, press red light will blink twice.

Now, alternate between POWER, over and over, until your Television turns off. Y many times, so please be patient. It could take up to 5 minutes. Remember to keep pointing the ONE FOR ALL 6 at your Television when you press the POWER and TV keys.

When your Television turns off, press and release Don’t forget, press MAGIC as soon as your Television turns off. Now your ONE FOR ALL 6 is ready to run your Television.

TV key on your ONE

Press and hold

until the ONE

9 9 1. The

TV and

ou may have to press these keys

MAGIC.

■■■■

+ 26 hidden pages