Omron CP1E-E20SDR-A, CP1E-N40S1DR-A Datasheet

CP-series CP1E CPU Units

CP1E-E20SDR-A

CP1E-N40S1DR-A

CP1E-E@@SD@-@ CP1E-N@@S@D-@-@ CP1E-E@@D@-@ CP1E-N@@D@-@/NA20D@-@

The CP1E Programmable Controller: Economical, Easy to use, and Efficient

■ The E@@(S)-type Basic CPU Units provide cost

performance and easy application with only basic functionality.

■ The N@@(S@) and NA-types Application CPU Units

support Programmable Terminal connection, position control, and inverter connection

Features

• New CP1E CPU Units now available.

- Lineup including CPU Units with built-in three ports: USB, RS-232C, RS-485.

- The depth of CPU Units with RS-232C connectors is reduced by 20 mm. (N30/40/60S(1))

• Easy connection with computers using commercially available USB cables.

• With E30/40/60(S), N30/40/60(S@) or NA20 CPU Units, Add I/O, Analog I/O or Temperature Inputs by Connecting

Expansion Units or Expansion I/O Units.

• Input interrupts

• Complete High-speed Counter Functionality.

• Versatile pulse control for Transistor Output for N14/20/30/40/60(S@) or NA20 CPU Units.

• PWM Outputs for Transistor Output for N14/20/30/40/60(S@) or NA20 CPU Units.

• Mounting Serial Option Boards, Ethernet Option Board and Analog Option Board to N30/40/60 or NA20 CPU Units.

• Built-in analog I/O, two inputs and one output, for NA-type CPU Units.

Windows is a registered trademark of Microsoft Corporation in the United States and other countries. Other company names and product names in this document are the trademarks or registered trademarks of their respective companies. The product photographs and figures that are used in this catalog may vary somewhat from the actual products.

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

Expansion I/O Units Expansion Units

20 or 40 I/O Points

8 inputs

8 outputs

16 outputs

32 outputs

Up to 3 Units can be connected

CP1W-CN811

CP1E CPU Unit

Expansion Units and Expansion I/O Units

I/O Connecting Cable

When a two level layout is created by expansion and distance is required

DIN Track

Analog I/O

Analog inputs

Analog outputs

Temperature sensors

CompoBus/S I/O Link Unit

Personal computer

Support Software CX-Programmer

IBM PC/AT or equivalent

CP1E-E14SDR- CP1E-E20SDR-

CP1E-E30SDR- CP1E-E40SDR- CP1E-E60SDR-

Personal computer

CP1E-E30DR-A CP1E-E40DR-A

CP1E-E10D@-@ CP1E-E14DR-A CP1E-E20DR-A

Support Software CX-Programmer

IBM PC/AT or equivalent

CP1E CPU Unit Expansion I/O Units Expansion Units

20 or 40 I/O Points

8 inputs

8 outputs

16 outputs

32 outputs

Up to 3 Units can be connected

CP1W-CN811

CP1E CPU Unit

Expansion Units and Expansion I/O Units

I/O Connecting Cable

When a two level layout is created by expansion and distance is required

DIN Track

Analog I/O

Analog inputs

Analog outputs

Temperature sensors

CompoBus/S I/O Link Unit

System Configuration

■Basic Model Basic System Configuration Using an E@@S-type CPU Unit

Basic System Configuration Using an E@@-type CPU Unit

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

Expansion I/O Units Expansion Units

8 inputs

8 outputs

16 outputs

32 outputs

Analog I/O

Analog inputs

Analog outputs

Temperature sensors

CompoBus/S I/O Link Unit

Up to 3 Units can be connected

DIN Track

CP1W-CN811

CP1E CPU Unit

Expansion Units and Expansion I/O Units

I/O Connecting Cable

When a two level layout is created by expansion and distance is required

20 or 40 I/O Points

(NT Link/Host Link)

General component

(No-protocol mode)

(Modbus-RTU)

CP-series PLC or CJ1M PLC

(Serial PLC Link)

Host computer

(Host Link)

Programmable Terminal (PT)

Inverter

Personal computer

Support Software CX-Programmer

IBM PC/AT or equivalent

Battery

CP1W-BAT01

CP1E-N30S(1)D- CP1E-N40S(1)D- CP1E-N60S(1)D-

CP1E-N30D- CP1E-N40D- CP1E-N60D- CP1E-NA20D-

CP1E-N14D- CP1E-N20D-

CP1E CPU Unit

Expansion I/O Units Expansion Units

20 or 40 I/O Points

8 inputs

8 outputs

16 outputs

32 outputs

Analog I/O

Analog inputs

Analog outputs

Temperature sensors

CompoBus/S I/O Link Unit

Up to 3 Units can be connected

DIN Track

CP1W-CN811

CP1E CPU Unit

Expansion Units and Expansion I/O Units

I/O Connecting Cable

Personal computer

IBM PC/AT or equivalent

Built in RS-232C

Battery

CP1W-BAT01

When a two level layout is created by expansion and distance is required

(NT Link/HOST Link)

General component

(No-protocol mode)

(Modbus-RTU)

CP-series PLC or CJ1M PLC

(Serial PLC Link)

Host computer

(Host Link)

Programmable Terminal (PT)

Inverter

Support Software CX-Programmer

COMM

RS-232C

Option Board

CP1W-CIF01

COMM

RS-422A/485 Option Board

CP1W-CIF11 CP1W-CIF12-V1

IP ADDRESS:

SUBNET MASK:

COMMERR

10BASE-T 100BASE-TX

Ethernet

Option Board

CP1W-CIF41

(version 2.0 or higher)

rOrO

Analog

Option Board

CP1W-ADB21 CP1W-DAB21V CP1W-MAB221

Note Neither the CP1W-DAM01 LCD Option Board nor the CP1W-CIF41

Ethernet Option Board version 1.0 can be used.

* Analog Option Board can be mounted only to N30/40/60 or NA20 CPU

Units version 1.2 or higher.

■Application Model Basic System Configuration Using an N/NA@@S(1)-type CPU Unit

Basic System Configuration Using an N/NA-type CPU Unit

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

CP1E-@@@@@D@-@

(1) (2) (3) (4) (5) (6) (7)

Peripheral USB Port

Model Number Structure

■ Model Number Legend (Not all models that can be represented with the model number legend can necessarily be produced.)

1. Class E : Basic model N : Application model NA :Application model with built-in analog

2. I/O capacity 10 : 10 I/O points (6 inputs, 4 outputs) 14 : 14 I/O points (8 inputs, 6 outputs) 20 : 20 I/O points (12 inputs, 8 outputs) 30 : 30 I/O points (18 inputs, 12 outputs) 40 : 40 I/O points (24 inputs, 16 outputs) 60 : 60 I/O points (36 inputs, 24 outputs)

3. Unit type S : Renewal None : Normal

4. Built-in RS-485 port 1 : RS-485 None : -

5. Input type D : DC inputs

6. Output type R : Relays outputs T : Transistor outputs, sinking T1 : Transistor outputs, sourcing

7. Power supply A : AC power supply D : DC power supply

Difference between E/N/NA@@-type and E/N@@S(1)-type

■Basic Model E@@(S)-type CPU Units

Normal-type

E@@-type

Peripheral USB Port

Renewal-type

E@@S-type

Difference in Characteristics and Functions

Function E@@-type (Normal) E@@S-type (Renewal)

Analog adjusters

2 adjusters (Setting range: 0 to 255)

None The analog adjuster PV in A642/A643 is fixed on 0000.

Product Lineup

E@@ CPU Unit (Normal) E@@S CPU Unit (Renewal)

Power

supply

Relay outputs

AC DC AC DC AC DC AC DC

Transistor outputs (sinking/sourcing)

Relay outputs

Transistor outputs (sinking/sourcing)

10 I/O points ❍❍❍❍-- -- -- -- 14 I/O points ❍ -- -- -- ❍ -- -- -- 20 I/O points ❍ -- -- -- ❍ -- -- -- 30 I/O points ❍ -- -- -- ❍ -- -- -- 40 I/O points ❍ -- -- -- ❍ -- -- -- 60 I/O points -- -- -- -- ❍ -- -- --

■Application Model

Peripheral USB Port

Built-in RS-232C port

Option Board slot

Analog input terminal (NA-type only)

Analog output terminals (NA-type only)

Built-in RS-232C port

Built-in RS-485 port

Peripheral USB Port

NC0001 02

NC COM COM COM 03

CIO 100.00 and CIO 100.01 are different COM.

N/NA@@(S)-type CPU Units

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

Normal-type

N@@-/NA-type

Renewal-type

N@@S1-type

Built-in RS-232C port

Difference in Characteristics and Functions

Function N/NA@@-type (Normal) N@@S(1)-type (Renewal)

Analog adjusters

Built-in RS-232C port 6 signals are supported: SD, RD, RS, CS, DR and ER.

Option board 1 port (N30/40/60, NA20 CPU Unit only)

Built-in RS-485 port None

2 adjusters (Setting range: 0 to 255)

CIO 100.00 and CIO 100.01 correspond with different common terminals.

None The analog adjuster PV in A642/A643 is fixed on 0000.

4 signals are supported: SD, RD, RS and CS. DR (pin 7) and ER (pin 8) are not supported.

Cannot be mounted There is no slot for an option board.

1 port (N30/40/60S1 CPU Unit only) With 2-wire connections, it can only communicate in half duplex. Terminating resistance ON/OFF can be set by DIP switch.

CIO 100.00 and CIO 100.01 correspond with the same common terminal.

Renewal-type

N@@S-type

Peripheral USB Port

V+00 0102

Terminal Arrangements (Transistor outputs only)

allocation

Power supply for transistor outputs

Not needed Do not connect an external power supply.

V- COM(V-) COM 03

CIO 100.00 and CIO 100.01 are the same COM.

Needed It is necessary to connect a DC24V external power supply when using terminals 00 and 01 on terminal block CIO 100. Do not connect the external power supply to the terminals except 00 and 01 on terminal block CIO 100.

COM

Product Lineup

Normal-type Renewal-type

Power

supply

N@@ CPU Unit

RS-232C+1 option slot (*)

Relay outputs

AC DC AC DC AC DC AC DC AC DC AC DC

Transistor outputs

(sinking/sourcing)

Relay outputs

N@@S CPU Unit

Built-in RS-232C

Transistor outputs (sinking/sourcing)

N@@S1 CPU Unit

Built-in RS-232C+RS-485

Relay outputs

Transistor outputs (sinking/sourcing)

10 I/O points -- -- -- -- -- -- -- -- -- -- -- -- 14 I/O points ❍❍❍❍ -- -- -- -- -- -- -- -- 20 I/O points ❍❍❍❍ -- -- -- -- -- -- -- -- 30 I/O points ❍❍❍❍❍ -- -- ❍❍ -- -- ❍ 40 I/O points ❍❍❍❍❍ -- -- ❍❍ -- -- ❍ 60 I/O points ❍❍❍❍❍ -- -- ❍❍ -- -- ❍

20 I/O points (Built-in analog)

* 30, 40 and 60 I/O points only.

❍ -- -- ❍ -- -- -- -- -- -- -- --

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

Ordering Information

Applicable standards

Refer to the OMRON website (www.ia.omron.com) or ask your OMRON representative for the most recent applicable standards for each model.

Basic Model

●Renewal-type

■E@@S-type CP1E CPU Units (Built-in USB port)

Current

consumption (A)

5 V 24 V

Product name

E@@S-type CPU Units with 14 I/O Points

E@@S-type CPU Units with 20 I/O Points

E@@S-type CPU Units with 30 I/O Points

Power

Supply

100 to 240 VAC

Specifications

Inputs Outputs

8 6 Relay 2K steps 2K words -- 0.16 0.07 CP1E-E14SDR-A

12 8 Relay 2K steps 2K words -- 0.17 0.08 CP1E-E20SDR-A

18 12 Relay 2K steps 2K words 0.30 0.17 0.07 CP1E-E30SDR-A

Output

type

Program

capacity

Data

memory

capacity

External

power

supply

(24 VDC)

(A)

Model

E@@S-type CPU Units with 40 I/O Points

E@@S-type CPU Units with 60 I/O Points

100 to 240 VAC

24 16 Relay 2K steps 2K words 0.30 0.17 0.09 CP1E-E40SDR-A

36 24 Relay 2K steps 2K words 0.30 0.17 0.13 CP1E-E60SDR-A

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

●Normal-type

■E@@-type CP1E CPU Units (Built-in USB port)

Specifications

Product name

E@@-type CPU Units with 10 I/O Points

Power

Supply

100 to 240 VAC

Inputs Outputs

Output

type

Relay

Transistor (sinking)

Transistor (sourcing)

Relay -- 0.08 0.04 CP1E-E10DR-D

Program capacity

2K steps

Data memory capacity

2K words

External

power

supply

(24 VDC)

(A)

-- 0.08 0.04 CP1E-E10DR-A

-- 0.11 -- CP1E-E10DT-A

-- 0.11 -- CP1E-E10DT1-A

Current

consumption (A)

5 V 24 V

Model

E@@-type CPU Units with 14 I/O Points

E@@-type CPU Units with 20 I/O Points

E@@-type CPU Units with 30 I/O Points

E@@-type CPU Units with 40 I/O Points

24 VDC

100 to 240 VAC

Transistor (sinking)

Transistor (sourcing)

8 6 Relay 2K steps 2K words -- 0.16 0.07 CP1E-E14DR-A

12 8 Relay 2K steps 2K words -- 0.17 0.08 CP1E-E20DR-A

18 12 Relay 2K steps 2K words 0.30 0.17 0.07 CP1E-E30DR-A

24 16 Relay 2K steps 2K words 0.30 0.17 0.09 CP1E-E40DR-A

-- 0.11 -- CP1E-E10DT-D

-- 0.11 -- CP1E-E10DT1-D

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

Application Model

●Renewal-type

■N@@S1-type CP1E CPU Units (Built-in RS-232C, RS-485, USB ports)

Current

consumption (A)

5 V 24 V

Product name

N@@S1-type CPU Units with 30 I/O Points

Power

Supply

100 to 240 VAC

Specifications

Inputs Outputs

Output

type

Relay

Program

capacity

Data

memory

capacity

External

power

supply

(24 VDC)

(A)

0.30 0.21 0.07 CP1E-N30S1DR-A

Model

Transistor (sinking)

Transistor (sourcing)

Relay

Transistor (sinking)

Transistor (sourcing)

Relay

Transistor (sinking)

Transistor (sourcing)

8K steps 8K words

-- 0.27 0.02 CP1E-N30S1DT-D

-- 0.27 0.02 CP1E-N30S1DT1-D

0.30 0.21 0.09 CP1E-N40S1DR-A

-- 0.31 0.02 CP1E-N40S1DT-D

-- 0.31 0.02 CP1E-N40S1DT1-D

0.30 0.21 0.13 CP1E-N60S1DR-A

-- 0.31 0.02 CP1E-N60S1DT-D

-- 0.31 0.02 CP1E-N60S1DT1-D

N@@S1-type CPU Units with 40 I/O Points

N@@S1-type CPU Units with 60 I/O Points

DC24V

100 to 240 VAC

DC24V

100 to 240 VAC

DC24V

18 12

24 16

36 24

■N@@S-type CP1E CPU Units (Built-in RS-232C, USB ports)

External

power

supply

(24 VDC)

(A)

0.30 0.21 0.07 CP1E-N30SDR-A

Product name

N@@S-type CPU Units with 30 I/O Points

Power

Supply

100 to 240 VAC

Specifications

Inputs Outputs

Output

type

Relay

Program

capacity

Data

memory

capacity

Current

consumption (A)

5 V 24 V

Model

N@@S-type CPU Units with 40 I/O Points

N@@S-type CPU Units with 60 I/O Points

DC24V

100 to 240 VAC

DC24V

100 to 240 VAC

DC24V

18 12

24 16

36 24

Transistor (sinking)

Transistor (sourcing)

Relay

Transistor (sinking)

Transistor (sourcing)

Relay

Transistor (sinking)

Transistor (sourcing)

8K steps 8K words

-- 0.27 0.02 CP1E-N30SDT-D

-- 0.27 0.02 CP1E-N30SDT1-D

0.30 0.21 0.09 CP1E-N40SDR-A

-- 0.31 0.02 CP1E-N40SDT-D

-- 0.31 0.02 CP1E-N40SDT1-D

0.30 0.21 0.13 CP1E-N60SDR-A

-- 0.31 0.02 CP1E-N60SDT-D

-- 0.31 0.02 CP1E-N60SDT1-D

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

●Normal-type

■N/NA@@-type CP1E CPU Units (Built-in RS-232C, USB ports)

External

power

supply

(24 VDC)

(A)

-- 0.17 0.07 CP1E-N14DR-A

-- 0.22 0.02 CP1E-N14DT-A

-- 0.22 0.02 CP1E-N14DT1-A

-- 0.22 0.02 CP1E-N14DT-D

-- 0.22 0.02 CP1E-N14DT1-D

-- 0.18 0.08 CP1E-N20DR-A

Product name

N@@-type CPU Units with 14 I/O Points

N@@-type CPU Units with 20 I/O Points

Power

Supply

100 to 240 VAC

24 VDC

Specifications

Inputs Outputs

Output

type

Relay

Transistor (sinking)

Transistor (sourcing)

Relay -- 0.17 0.07 CP1E-N14DR-D

Transistor (sinking)

Transistor (sourcing)

Relay

Program capacity

8K steps

Data memory capacity

8K words

Current

consumption (A)

5 V 24 V

Model

N@@-type CPU Units with 30 I/O Points

N@@-type CPU Units with 40 I/O Points

100 to 240 VAC

24 VDC

100 to 240 VAC

24 VDC

100 to 240 VAC

24 VDC

12 8

18 12

24 16

Transistor (sinking)

Transistor (sourcing)

Relay -- 0.18 0.08 CP1E-N20DR-D

Transistor (sinking)

Transistor (sourcing)

Relay

Transistor (sinking)

Transistor (sourcing)

Relay -- 0.21 0.07 CP1E-N30DR-D

Transistor (sinking)

Transistor (sourcing)

Relay

Transistor (sinking)

Transistor (sourcing)

Relay -- 0.21 0.09 CP1E-N40DR-D

Transistor (sinking)

Transistor (sourcing)

8K steps 8K words

-- 0.23 0.02 CP1E-N20DT-A

-- 0.23 0.02 CP1E-N20DT1-A

-- 0.23 0.02 CP1E-N20DT-D

-- 0.23 0.02 CP1E-N20DT1-D

0.30 0.21 0.07 CP1E-N30DR-A

0.30 0.27 0.02 CP1E-N30DT-A

0.30 0.27 0.02 CP1E-N30DT1-A

-- 0.27 0.02 CP1E-N30DT-D

-- 0.27 0.02 CP1E-N30DT1-D

0.30 0.21 0.09 CP1E-N40DR-A

0.30 0.31 0.02 CP1E-N40DT-A

0.30 0.31 0.02 CP1E-N40DT1-A

-- 0.31 0.02 CP1E-N40DT-D

-- 0.31 0.02 CP1E-N40DT1-D

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

Product name

N@@-type CPU Units with 60 I/O Points

NA-type CPU Units with 20 I/O Points (Built-in analog)

Power

Supply

100 to 240 VAC

24 VDC

100 to 240 VAC

24 VDC

Inputs Outputs

36 24

(Built-in analog inputs: 2)

(Built-in analog outputs: 1)

Optional Products

Specifications

Output

type

Relay

Transistor (sinking)

Transistor (sourcing)

Relay -- 0.21 0.13 CP1E-N60DR-D

Transistor (sinking)

Transistor (sourcing)

Relay

Transistor (sinking)

Transistor (sourcing)

Program

capacity

8K steps

Data

memory

capacity

8K words

External

power

supply

(24 VDC)

(A)

0.30 0.21 0.13 CP1E-N60DR-A

0.30 0.31 0.02 CP1E-N60DT-A

0.30 0.31 0.02 CP1E-N60DT1-A

-- 0.31 0.02 CP1E-N60DT-D

-- 0.31 0.02 CP1E-N60DT1-D

0.30 0.18 0.11 CP1E-NA20DR-A

-- 0.23 0.09 CP1E-NA20DT-D

-- 0.23 0.09 CP1E-NA20DT1-D

Current

consumption (A)

5 V 24 V

Model

■Battery Set

Product name Specifications Model Battery Set For N/NA@@(S@)-type CP1E CPU Units

Note: Mount a Battery to an N/NA@@(S@)-type CPU Unit if the data in the following areas must

be backed up for power interruptions.

• DM Area (D) (except backed up words in the DM Area), Holding Area (H), Counter Completion Flags (C), Counter Present Values (C), Auxiliary Area (A), and Clock Function (Use batteries within two years of manufacture.)

CP1W-BAT01

■Option Board (for CP1E N30/40/60 or NA20 CPU Units)

The Options cannot be used for CP1E N14/20, N30/40/60S(1), E10/14/20/30/40/60(S) CPU Units.

Product name Specifications Model

RS-232C Option Board

One RS-232C Option Board can be mounted to the Option Board slot. CP1W-CIF01

RS-422A/485 Option Board

CP1W-CIF11

RS-422A/485 Isolated-type Option Board

Ethernet Option Board

Analog Input Option Board

One RS-422A/485 Option Board can be mounted to the Option Board slot.

One Ethernet Option Board can be mounted to the Option Board slot. CP1E CPU Units are supported by CP1W-CIF41 version 2.0 or higher. When using CP1W-CIF41, CX-Programmer version 9.12 or higher is required.

Can be mounted in CPU Unit Option Board slot. 2 analog inputs. 0-10V(Resolution:1/4000), 0-20mA (Resolution:1/2000).

CP1W-CIF12-V1

CP1W-CIF41

CP1W-ADB21 *

Analog Output Option Board

Analog I/O Option Board

Can be mounted in CPU Unit Option Board slot. 2 analog outputs. 0-10V (Resolution:1/4000).

Can be mounted in CPU Unit Option Board slot. 2 analog inputs. 0-10V(Resolution:1/4000), 0-20mA(Resolution:1/2000). 2 analog outputs. 0-10V (Resolution:1/4000).

CP1W-DAB21V *

CP1W-MAB221 *

Note: It is not possible to use a CP-series Ethernet Option Board version 1.0 (CP1W-CIF41), LCD Option Board (CP1W-DAM01), or Memory Card

(CP1W-ME05M) with a CP1E CPU Unit.

* Support is provided with CP1E CPU Unit version 1.2 and later.

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

■

Expansion I/O Units and Expansion Units (for CP1E E30/40/60(S), N30/40/60(S@), or NA20 CPU Units)

CP1E E10/14/20(S) or N14/20 CPU Units do not support Expansion I/O Units and Expansion Units.

Unit type Product name

Input Unit

Specifications

Inputs Outputs Output type 5 V 24 V

8 -- 24 VDC Input 0.018 -- CP1W-8ED

Current

consumption (A)

Model

CP1W Expansion I/O Units

CP1W Expansion Units

Output Units

I/O Units

Analog Input Unit

Analog Output Unit

Analog I/O Unit

Temperature Sensor Unit

CompoBus/S I/O Link Unit

Relay 0.026 0.044 CP1W-8ER

-- 8

-- 16

-- 32

12 8

24 16

4CH --

-- 2CH

-- 4CH

4CH 4CH

4CH 2CH

2CH 1CH

2CH -- Sensor type: Thermocouple (J or K) 0.040 0.059 CP1W-TS001

4CH -- Sensor type: Thermocouple (J or K) 0.040 0.059 CP1W-TS002

2CH --

4CH --

12CH -- Sensor type: Thermocouple (J or K) 0.080 0.050 CP1W-TS004

8 8 CompoBus/S slave 0.029 -- CP1W-SRT21

Transistor (sinking)

Transistor (sourcing)

Relay 0.042 0.090 CP1W-16ER

Transistor (sinking)

Transistor (sourcing)

Relay 0.049 0.131 CP1W-32ER

Transistor (sinking)

Transistor (sourcing)

Relay 0.103 0.044 CP1W-20EDR1

Transistor (sinking)

Transistor (sourcing)

Relay 0.080 0.090 CP1W-40EDR

Transistor (sinking)

Transistor (sourcing)

Resolution:

Input range: 0 to 5 V, 1 to 5 V, 0 to 10 V, ±10 V, 0 to 20 mA, or 4 to 20 mA.

Output range: 1 to 5 V, 0 to 10 V, ±10 V, 0 to 20 mA, or 4 to 20 mA.

Input range: 0 to 5 V, 1 to 5 V, 0 to 10 V, ±10 V, 0 to 20 mA, or 4 to 20 mA. Output range: 1 to 5 V, 0 to 10 V, ±10 V, 0 to 20 mA, or 4 to 20 mA.

Sensor type: Platinum resistance

Sensor type: Thermocouple (J or K) 2channels can be used as analog input. Input range: 1 to 5 V, 0 to 10 V, 4-20 mA

thermometer (Pt100 or JPt100)

1/6000

Resolution: 1/12000

Resolution: 1/6000

Resolution: 1/12000

Resolution: 1/6000

Resolution: 1/12000

0.075 -- CP1W-8ET

0.075 -- CP1W-8ET1

0.076 -- CP1W-16ET

0.076 -- CP1W-16ET1

0.113 -- CP1W-32ET

0.113 -- CP1W-32ET1

0.130 -- CP1W-20EDT

0.130 -- CP1W-20EDT1

0.160 -- CP1W-40EDT

0.160 -- CP1W-40EDT1

0.100 0.090 CP1W-AD041

0.100 0.050 CP1W-AD042

0.040 0.095 CP1W-DA021

0.080 0.124 CP1W-DA041

0.070 0.160 CP1W-DA042

0.120 0.170 CP1W-MAD44

0.120 0.120 CP1W-MAD42

0.083 0.110 CP1W-MAD11

0.054 0.073 CP1W-TS101

0.054 0.073 CP1W-TS102

0.070 0.030 CP1W-TS003

■I/O Connecting Cable

Product name Specifications Model

I/O Connecting Cable

Note: An I/O Connecting Cable (approx. 6 cm) for horizontal connection is provided with CP1W Expansion I/O Units and Expansion Units.

80 cm (for CP1W Expansion I/O Units and Expansion Units) Only one I/O Connecting Cable can be used in each PLC.

CP1W-CN811

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

■DIN Track Accessories

Name Specifications Model

Length: 0.5 m; Height: 7.3 mm PFP-50N

DIN Track

End Plate A stopper to secure the Units on the DIN Track. PFP-M

Length: 1 m; Height: 7.3 mm PFP-100N

Length: 1 m; Height: 16 mm PFP-100N2

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

Programming Devices

■Software

Product name

FA Integrated Tool Package CX-One Lite Ver.4.@

FA Integrated Tool Package CX-One Package Ver. 4.@

CX-One Lite is a subset of the complete CX-One package that provides only the Support Software required for micro PLC applications. CX-One Lite runs on the following OS. OS: Windows 7 (32-bit/64-bit version) / Windows 8 (32-bit/64-bit version) / Windows 8.1 (32-

bit/64-bit version) / Windows 10 (32-bit/64-bit version)

CX-One Lite Ver. 4.@ includes Micro PLC Edition CX-Programmer Ver.9.@.

CX-One is a comprehensive software package that integrates Support Software for OMRON PLCs and components. CX-One runs on the following OS. OS: Windows 7 (32-bit/64-bit version) / Windows 8 (32-bit/64-bit version) / Windows 8.1 (32-

bit/64-bit version) / Windows 10 (32-bit/64-bit version)

CX-One Ver. 4.@ includes CX-Programmer Ver. 9.@.

Note: 1. The E20/30/40(S), N20/N30/N40(S) CPU Units are supported by CX-Programmer version 8.2 or higher.

The E10, E14, N14, N60, and NA20 CPU Units are supported by CX-Programmer version 9.03 or higher. When Micro PLC Edition CXProgrammer is used, you need version 9.03 or higher. The E60S CPU Units are supported by CX-Programmer version 9.42 or higher. When Micro PLC Edition CX-Programmer is used, you need version 9.42 or higher.

2. The CX-One and CX-One Lite cannot be simultaneously installed on the same computer.

* Multi licenses (3, 10, 30, or 50 licenses) and DVD media without licenses are also available for the CX-One.

The following tables lists the Support Software that can be installed from CX-One

Support Software in CX-One

Micro PLC Edition CX-Programmer Ver.9.@ Yes No CX-Drive Ver.1.@ Yes Yes CX-Programmer Ver.9.@ No Yes CX-Process Tool Ver.5.@ No Yes CX-Integrator Ver.2.@ Yes Yes Faceplate Auto-Builder for NS Ver.3.@ No Yes Switch Box Utility Ver.1.@ Yes Yes CX-Designer Ver.3.@ Yes Yes CX-Protocol Ver.1.@ No Yes NV-Designer Ver.1.@ Yes Yes CX-Simulator Ver.1.@ Yes Yes CX-Thermo Ver.4.@ Yes Yes CX-Position Ver.2.@ No Yes CX-ConfiguratorFDT Ver.1.@ Yes Yes CX-Motion-NCF Ver.1.@ No Yes CX-FLnet Ver.1.@ No Yes CX-Motion-MCH Ver.2.@ No Yes Network Configurator Ver.3.@ Yes Yes CX-Motion Ver.2.@ No Yes CX-Server Ver.4.@ Yes Yes

CX-One Lite

Ver.4.@

Note: For details, refer to the CX-One Catalog (Cat. No. R134).

Specifications

CX-One Ver.4.@

Number of

licenses

1 license DVD CXONE-LT01D-V4

1 license * DVD CXONE-AL01D-V4

Support Software in CX-One

Media

CX-One Lite

Ver.4.@

Model

CX-One Ver.4.@

Unit Versions

Units Model numbers Unit version

CP1E-E@@SDR-A

CP1E CPU Units

CP1E-N@@S@D@-@ CP1E-E@@D@-@ CP1E-N@@D@-@ CP1E-NA@@D@-@

Unit version 1.@

Unit Versions and Programming Devices

The following tables show the relationship between unit versions and CX-Programmer versions.

Required Programming Device *1

CPU Unit Functions

Ver.8.2 or

higher

CP1E-E20/30/40(S)D@-A CP1E-N20/30/40(S@)D@-@

CP1E-E10D@-@ CP1E-@14(S)D@-@ CP1E-N60(S@)D@-@ CP1E-NA20D@-@

CP1E-E60SDR-A

Unit version 1.@ functions

Note: 1. To update the CX-Programmer, the CX-One version 3/version 4 auto-update must be installed.

2. Use the CX-Programmer version 9.12 or higher, when the CP1W-CIF41 is applied.

* 1 A Programming Console cannot be used. * 2 Supports Smart Input function. * 3 Does not support Smart Input function.

CX-Programmer Micro PLC Edition CX-Programmer

Ver.9.03

or higher

Yes

No No

Yes

Ver.9.42

or higher

Yes

Ver.8.2 or

higher

Yes

No No

Ver.9.03

or higher

Yes

Ver.9.42

or higher

Yes

CX-

Programmer

for CP1E

Ver.1.0

Yes

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

General Specifications

Type AC power supply models DC power supply models

Model

Enclosure Mounted in a panel

E/N/NA@@-type CPU Unit with 10 I/O points (CP1E-E10D@-@): 90mm *1 × 85mm *2 × 66 mm CPU Unit with 14 or 20 I/O points (CP1E-@14D@-@/@20D@-@): 90mm *1 × 85mm *2 × 86 mm CPU Unit with 30 I/O points (CP1E-@30D@-@): 90mm *1 × 85mm *2 × 130 mm CPU Unit with 40 I/O points (CP1E-@40D@-@): 90mm *1 × 85mm *2 × 150 mm

Dimensions (H × D × W)

Weight

Supply voltage 100 to 240 VAC 50/60 Hz 24 VDC

Operating voltage range

Power consumption

Electrical specifications

Application environment

Terminal block Fixed (not removable)

Terminal screw size M3

Applicable standards Conforms to EC Directive

Grounding method Ground to 100 Ω or less.

Inrush current

External power supply *3

Insulation resistance

Dielectric strength

Power OFF detection time

Ambient operating temperature

Ambient humidity 10% to 90%

Atmosphere No corrosive gas.

Ambient storage temperature

Altitude 2,000 m max.

Pollution degree 2 or less: Meets IEC 61010-2-201.

Noise resistance 2 kV on power supply line (Conforms to IEC61000-4-4.)

Overvoltage category Category II: Meets IEC 61010-2-201.

EMC Immunity Level Zone B

Vibration resistance

Shock resistance

CPU Unit with 60 I/O points (CP1E-N60D@-@): 90mm *1 × 85mm *2 × 195 mm CPU Unit with 20 I/O points and built-in analog (CP1E-NA20D@-@): 90mm *1 × 85mm *2 × 130 mm

E/N/@@S(1)-type CPU Unit with 14 or 20 I/O points (CP1E-@14SD@-@/@20SD@-@): 90mm *1 × 79mm *2 × 86 mm CPU Unit with 30 I/O points (CP1E-@30S(1)D@-@): 90mm *1 × CPU Unit with 40 I/O points (CP1E-@40S(1)D@-@): 90mm *1 × 79mm *2 × 150 mm CPU Unit with 60 I/O points (CP1E-@60S(1)D@-@): 90mm *1 × 79mm *2 × 195 mm

CPU Unit with 10 I/O points (CP1E-E10D@-@): 300g max. CPU Unit with 14 I/O points (CP1E-@14(S)D@-@): 360g max. CPU Unit with 20 I/O points (CP1E-@20(S)D@-@): 370g max. CPU Unit with 30 I/O points (CP1E-@30(S@)D@-@): 600g max. CPU Unit with 40 I/O points (CP1E-@40(S@)D@-@): 660g max. CPU Unit with 60 I/O points (CP1E-@60(S@)D@-@): 850g max. CPU Unit with 20 I/O points and built-in analog (CP1E-NA20D@-@): 680g max.

85 to 264 VAC 20.4 to 26.4 VDC

15 VA/100 VAC max. 25 VA/240 VAC max. (CP1E-E10D@-A/@14(S)D@-A/@20(S)D@-A)

50 VA/100 VAC max. 70 VA/240 VAC max. (CP1E-NA20D@-A/@30(S@)D@-A/@40(S@)D@-A/ N60(S@)D@-A)

120 VAC, 20 A for 8 ms max. for cold start at room temperature 240 VAC, 40 A for 8 ms max. for cold start at room temperature

Not provided. (CP1E-E10D@-A/@14(S)D@-A/@20(S)D@-A) 24 VDC, 300 mA (CP1E-NA20D@-A/@30D@-A/@40D@-A/@60D@-A/ @30SDR-A/@40SDR-A/@60SDR-A)

20 MΩ min. (at 500 VDC) between the external AC terminals and GR terminals

2,300 VAC 50/60Hz for 1 min between AC external and GR terminals Leakage current: 5 mA max.

10 ms min. 2 ms min.

0 to 55 °C

-20 to 75 °C (excluding battery)

Conforms to JIS 60068-2-6. 5 to 8.4 Hz with 3.5-mm amplitude, 8.4 to 150 Hz Acceleration of 9.8 m/s

Conforms to JIS 60068-2-27. 147 m/s

CP1E-@@@S@D@-A

CP1E-@@@D@-A

for 100 min in X, Y, and Z directions (10 sweeps of 10 min each = 100 min total)

, 3 times in X, Y, and Z directions

9 W max. (CP1E-E10D@-D) 13 W max. (CP1E-N14D@-D/N20D@-D)

20 W max. (CP1E-NA20D@-D/N30 N60

(S@)D@

24 VDC, 30 A for 20 ms max. for cold start at room temperature

Not provided

Except between DC primary current and DC secondary current

* 1 Total of 110 mm with mounting brackets. * 2 Excluding cables. * 3 Use the external power supply to power input devices. Do not use it to drive output devices.

This is the rated value for the maximum system configuration. Use the following formula to calculate power consumption for CPU Units with DC power.

* 4

Formula: DC power consumption = (5V current consumption ✕ 5 V/70% (internal power efficiency) + 24V current consumption) ✕ 1.1(current fluctuation factor) The above calculation results show that a DC power supply with a greater capacity is required.

CP1E-@@@S@D@-D

CP1E-@@@D@-D

79mm *2 ×

-D) *4

130 mm

(S@)D@

-D/N40

(S@)D@

-D/

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

Performance Specifications

Item

Program capacity

Control method Stored program method

I/O control method Cyclic scan with immediate refreshing

Program language Ladder diagram

Instructions Approximately 200

Processing speed

Number of CP1W-series Expansion Units connected

Maximum number of I/O points

Built-in I/O

Built-in input functions

Built-in output functions

Built-in analog

Analog adjusters

Overhead processing time 0.4 ms

Instruction execution times

High-speed counter mode/ maximum frequency

High-speed counters

Input interrupts

Quick-response Inputs

Normal input

Pulse outputs (Models with transistor outputs only)

Counting mode

Count value 32 bits

Counter reset modes

Control method

Input constants

Pulse output method and output frequency

Output mode

Number of output pulses

Acceleration/ deceleration curves

Changing SVs during instruction execution

Origin searches

Frequency

Duty factor

Output mode Continuous Mode

Analog input

Analog output Setting range: 0 to 6,000 (1 channels only for NA-type)

2 K steps (8 Kbytes) including the symbol table, comments, and program indices of the CX-Programmer

Basic instructions (LD): 1.19 µs min. Special instructions (MOV): 7.9 µs min.

CP1E-E10D@-@/@14(S)D@-@/@20(S)D@-@: None CP1E-@30(S@)D@-@/@40(S@)D@-@/@60(S@)D@-@/NA20(S@)D@-@: 3 units

CP1E-E10D@-@ : 10 CP1E-@14(S)D@-@: 14 CP1E-@20(S)D@-@: 20 CP1E-@30(S@)D@-@: 150 (30 built in, 40 × 3 expansion) CP1E-@40(S@)D@-@: 160 (40 built in, 40 × 3 expansion) CP1E-@60(S@)D@-@: 180 (60 built in, 40 × 3 expansion) CP1E-NA20D@-@: 140 (20 built in, 40 × 3 expansion)

CP1E-E10D@-@ : 10 (6 inputs, 4 outputs) CP1E-@14(S)D@-@: 14 (8 inputs, 6 outputs) CP1E-@20(S)D@-@: 20 (12 inputs, 8 outputs) CP1E-@30(S@)D@-@: 30 (18 inputs, 12 outputs) CP1E-@40(S@)D@-@: 40 (24 inputs, 16 outputs) CP1E-@60(S@)D@-@: 60 (36 inputs, 24 outputs) CP1E-NA20D@-@: 20 (12 inputs, 8 outputs)

Incremental Pulse Inputs

10 kHz: 6 counters

Up/Down Inputs

10 kHz: 2 counters

Pulse + Direction Inputs

10 kHz: 2 counters

Differential Phase Inputs (4x)

5 kHz: 2 counters

Linear mode Ring mode

Phase Z and software reset (excluding increment pulse input) Software reset

Target Matching Range Comparison

6 inputs (4 inputs only for 10 I/O points) Interrupt input pulse width: 50 µs min.

6 inputs (4 inputs only for 10 I/O points) Input pulse width: 50 µs min.

Delays can be set in the PLC Setup (0 to 32 ms, default: 8 ms). Set values: 0, 1, 2, 4, 8, 16, or 32 ms

Pulse output function not included

PWM output function not included

Analog function not included

E/N/NA@@-type: 2 adjusters (Setting range: 0 to 255) E/N@@S(1)-type: None

CP1E-E@@SD@-@

CP1E-@@D@-@

5 counters (only for 10 I/O points)

CP1E-N@@S@D@-@

CP1E-N@@D@-@

CP1E-NA@@D@-@

8 K steps (32 Kbytes) including the symbol table, comments, and program indices of the CX-Programmer

Incremental Pulse Inputs

100 kHz: 2 counters,10 kHz: 4 counters

Up/Down Inputs

100 kHz: 1 counters,10 kHz: 1 counters

Pulse + Direction Inputs

100 kHz: 2 counters

Differential Phase Inputs (4x)

50 kHz: 1 counter, 5 kHz: 1 counter

Pulse + Direction Mode 1 Hz to 100 kHz: 2 outputs

Continuous mode (for speed control) Independent mode (for position control)

Relative coordinates: 0000 0000 to 7FFF FFFF hex (0 to 2147483647) Absolute coordinates: 8000 0000 to 7FFF FFFF hex (-2147483647 to 2147483647)

Trapezoidal acceleration and deceleration (Cannot perform S-curve acceleration and deceleration.)

Only target position can be changed.

Included

2.0 to 6,553.5 Hz (in increments of 0.1 Hz) with 1 output or 2 Hz to 32,000 Hz (in increments of 1 Hz) with 1 output

0.0% to 100.0% (in increments of 0.1%) Accuracy: +1%/-0% at 2 Hz to 10,000 Hz and

Setting range: 0 to 6,000 (2 channels only for NA-type)

+5%/-0% at 10,000 Hz to 32,000 kHz

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

Item

B-type Peripheral USB Port Conforming to USB 2.0 B type connector

Built-in RS-232C port

Built-in RS-485 port

Communications

Serial Option port

Number of tasks

Maximum subroutine number 128 Maximum jump number 128 Scheduled interrupt tasks 1 interrupt task

Clock

Built-in EEPROM

Memory backup

CIO Area

Work Area (W) 1,600 bits (100 words): W0.00 to W99.15 (W0 to W99)

Holding Area (H)

Auxiliary Area (A)

Temporary Relay Area (TR) (TR Area) 16 bits: TR0 to TR15 Timer Area (T) 256 timer numbers (T0 to T255 (separate from counters)) Counter Area (C) 256 counter numbers (C0 to C255 (separate from timers))

Battery backup With CP1W-BAT01 Battery (Sold separately)

Input Bits 1,600 bits (100 words): CIO 0.00 to CIO 99.15 (CIO 00 to CIO 99) Output Bits 1,600 bits (100 words): CIO 100.00 to CIO 199.15 (CIO 100 to CIO 199) Serial PLC Link Words 1,440 bits (90 words): CIO 200.00 to CIO 289.15 (words CIO 200 to CIO 289)

Transmission distance

Communications method

synchronization Baud rate 1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 57.6, or 115.2 kbps Transmission

distance

Supported protocol

Communications method

synchronization Baud rate 1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 57.6, or 115.2 kbps Transmission

distance

Supported protocol

Mountable Option Boards

Communications method

synchronization Baud rate 1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 57.6, or 115.2 kbps

Compatible protocols

5 m max.

No built-in RS-232C port

No built-in RS-485 port

Option Board cannot be mounted.

• One cyclic execution task

• One scheduled interrupt task (always interrupt task 1)

• Six input interrupt tasks (interrupt tasks 2 to 7)

• Sixteen high-speed counter interrupt tasks (interrupt tasks 1 to 16)

Clock function not included. The time of error occurrence displays 01-01-01 01:01:01 Sunday

Ladder programs and parameters are automatically saved to built-in EEPROM A section of the Data Memory Area can be saved to the built-in EEPROM.

Battery cannot be mounted.

800 bits (50 words): H0.00 to H49.15 (H0 to H49) Bits in this area maintain their ON/OFF status when operating mode is changed.

Read-only: 7,168 bits (448 words) A0 to A447 Read/write: 4,896 bits (306 words) in words A448 to A753

CP1E-E@@SD@-@

CP1E-E@@D@-@

Interface: Conforms to EIA RS-232C.

Half duplex

Start-stop

15 m max.

N30/40/60S1-type only Interface: Conforms to EIA RS-485. 2-wire sensors No isolation

Half duplex

Start-stop

50 m max.

N30/40/60 and NA20-type only 1 port

Depends on Option Board.

Included. Accuracy (monthly deviation):

-4.5 min to -0.5 min at ambient temperature of 55

-2.0 min to +2.0 min at ambient temperature of 25

-2.5 min to +1.5 min at ambient temperature of 0

CP1W-BAT01 can be used. Maximum battery service life: 5 years Backup Time Guaranteed value (ambient temperature: 55 13,000 hours (approx. 1.5 years) Effective value (ambient temperature: 25 43,000 hours (approx. 5 years)

CP1E-N@@S@D@-@

CP1E-N@@D@-@

CP1E-NA@@D@-@

• Host Link

• 1:N NT Link

• No-protocol mode

• Serial PLC Links (master, slave)

• Modbus-RTU Easy Master

• Host Link

• 1:N NT Link

• No-protocol mode

• Serial PLC Links (master, slave)

• Modbus-RTU Easy Master

• One RS-232C port: CP1W-CIF01

•

One RS-422A/485 port (not isolated): CP1W-CIF11

• One RS-422A/485 port (isolated): CP1W-CIF12-V1

• One Ethernet port: CP1W-CIF41

• Host Link

• 1:N NT Link

• No-protocol mode

• Serial PLC Links (master, slave)

• Modbus-RTU Easy Master

C):

+ 37 hidden pages