
C-860L/D-360L
E. NOTICE OF MODIFICATION
1. Countermeasure of a line appears in the image..........................................E-2
2. Modification of the attachment of readwire for LCD.....................................E-3
SERVER_DIS E-1 Ver.1/Rev.4

E. NOTICE OF MODIFICATION C-860L/D-360L
SUBJECT Countermeasure of a line appears in the image 2000.7.14
[PHENOMENON]
A line appears in the image.
[CAUSE]
CCD gets wrong path for an electron after several time s power on/off (photo taken operation).
[% of malfunction CCD]
About 1.5%
OLT test result: 2pcs out of 200pcs during 100 shots photo taking
(1pc; 3shots got line, 1pc; 16 shots got line = not always happens even NG body)
[HANDLING OF COMPLAINTS FROM CUSTOMER]
Repair work --- Please refer to B-3 of (4) Removal of CA1 Board and Lens Assembly.
[SERIAL NUMBER ]
C-860L 71100001-71119720
C-860L 70100001-70113800
OAI Non selected bodyies Qty Selected bodyies
D-360L 69100001-69114000
OJ Non selected bodyies Qty Selected bodyies
19720
71500001-71520000
OE Non selected bodyies Qty Selected bodyies
Non
69500001-69545000
non
20000
13800
0
14000
45000
0
7111972171520001-
7011380170500001-
691140016954500174500001-
OAI Non selected bodyies Qty Selected bodyies
C-860Z(G)PAL
C-860Z (G)NTSC
** from May 2000, all bodies which were shipped from OLT must be selected bodies
72100001-72103000
73100001-73101200
3000
1200
7210300173101201-
[REPAIR PARTS]
All CCD, which were shipped from OLT, have been countermeasured.
SERVER_DIS E-2 Ver.1/Rev.3

C-860L/D-360L E. NOTICE OF MODIFICATION
SUBJECT Modification of the attachment of readwire for LCD 2001.6.7
[Modification outline]
It will change the attachment of readwire for LCD from conector to directly on the COMPL PWB,
ST-1.
[Reason]
Due to the cost down.
[Spare parts]
・Running change.
・New LCD and readwire are supplyed separately.
[Compatible Matrix]
There is no compatibility between new and old parts.
Parts OLD LCD
(VC865000)
OLD PWB, ST-1
(VC935500)
NEW PWB, ST-1
(VC955600)
○ ×
× ○
NEW LCD(VC872600)
NEW Readwire(VC873000&VC873100)
Ver.1/Rev.4 E-3 SERVER_DIS