Page 1
C—730Ultra Zoom
E. NOTICE OF MODIFICATION
1.Change of Card Cover ................................................................................E-2
2. Change of Firmware ..................................................................................E-3
E-1 Ver.1/Rev.2
Page 2
E. NOTICE OF MODIFICATION C-730Ultra Zoom
SUBJECT Change of Card Cover 2002.10.28
DESCRIPTION: Change of Card Cover for C-730 Ultra Zoom
OLD NEW
VE412300
(Card Cover)
REASON
The countermeasure of that the camera may recognize the xD picture card when the xD picture card is inserted
incompletely and the card cover is closed.
REMARKS
All of products are assembled with new parts.
All of service parts are new parts.
VE483500
(Card Cover)
SERVER_DIS E-2 Ver.1/Rev.1
Page 3
C-730 Ultra Zoom
SUBJECT Change of Firmware 2002.12.13
DESCRIPTION: Change of Firmware
OLD NEW
For Japan（Japanese/NTSC）
For North America / Canada
（English/NTSC）
For Europe（English /PAL）
For general areas
（
English /PAL）
For general areas
（Korean/PAL）
v556-77 v556-78
The serial number with new firmware. 246712001~
v556u-77 v556u-78
The serial number with new firmware.
（English/NTSC）
The serial number with new firmware.
（English /PAL）
247711001~
247103001~247105000
248718001~
v556g-77 v556g-78
The serial number with new firmware. 249701001~
v556k-77 v556k-78
The serial number with new firmware. 251702301~
For China（Chinese/PAL）
The serial number with new firmware. 250102501~
Reason: Refer to E-4,5
v556c-77 v556c-78
Ver.1/ Rev.2 E-3
Page 4
E. NOTICE OF MODIFICATION C-730Ultra Zoom
Classification The conditions to generate Contents Operation
Display of icon FL-40 is connected. Flash prohibition of an icon Open the card cover.
on monitor. The internal flash is close. is displayed. Set the mode dial at “PLAY” mode.
FL-40 is a state which carries Close the card cover.
out a flash. set the mode dial at “P” or “A/S/M”
mode.
The mode dial sets at “P” “Macro mark” disappears in Press the “macro” button.
mode. 3 seconds.
The last picture is the still “Sound recording mark” is Display the index on monitor.
picture with a sound. displayed. The picture puts into “screen setup”.
Index Index is displayed. The frame numbers in index The rotated picture is chosen.
and the picture of “screen Put the picture into “screen setup”.
setup” overlap.
The mode dial sets at “AUTO” The frame numbers in index Set at “quick view” mode.
mode. disappear. Display the index on monitor.
Set the time.
Hang-up A/V cable is connected to Hang-up Playback the movie.
camera. Format the media card.
Disconnect A/V cable when “NO
PICTURE” is displayed.
The recording mode is "TIFF". Hang-up Take pictures until memory become
The photograph is taken during fully.
"AF AREA wizard" or "Preset
WHITE BALANCE wizard" is
displayed on monitor.
Histogram The mode dial sets at “display”. Display on monitor Protect a picture.
The histogram is displayed. bcomes ordinary. Select the "Adding sound".
The histogram disappears. "WRITE PROTECT" is displayed.
Display overlaps “A/S/M” mode assignment into “Histogram” and “pixel Changing “A/S/M” mode with
custom button. resolution” overlap. custom buttan.
The mode dial sets at “A/S/M” Display the histogram.
mode. Changing M mode with custom
buttan.
"MF" is displayed on monitor. “pixel resolution” and "MF" Press the "Self/Remote” , “Macro/
The photograph is taken with overlap. Spot” or “Flash" button.
"taking two-in-one pictures"
mode.
SERVER_DIS E-4 Ver.1/Rev.2
Page 5
C-730 Ultra Zoom
Classification The conditions to generate Contents Operation
Frame number Index is displayed. The frame numbers in index Display the "resizing pictures
disappear. wizard" on monitor.
Select the “STOP”.
Monitor display The state in the demonstration Only back light in monitor Keep the shutter button halfway.
mode. is turned on. Select other mode with the mode
The photograph is taken during dial.
"AF AREA wizard" is displayed Stop to press the shutter button.
on monitor.
Incorrect “A” mode change with custom Super macro mode is not Select the "super macro mode" .
operation button. canceled. Changing “S” or “M” mode with
custom button.
The photograph is taken by Display on monitor is not Press top or bottom of the arrow
the view finder. finished after “Rec View”. pad during the recording.
REMARKS
Change classification: Running change.
Please execute the rewriting firmware to all C-730 Ultra Zoom that has been never modified to new firmware.
Version up procedure:
Please refer to repair manual D-3 “[2]CONFIRMATION AND UPDATE OF THE FIRMWARE”.
Ver.1/ Rev.2 E-5
Loading...